• Secure VPN connection terminated locally by the client. Reason 440: Driver Failure.

    One of our external users is receiving an error message that reads, "Secure VPN connection terminated locally by the client. Reason 440: Driver Failure." Any ideas on what the issue might be?

    Helpdesk0835 pointsBadges:
  • Load balancing for Windows Server 2003 Active Directory network

    If our domain controller goes down on our Windows Server 2003 Active Directory network what needs to be done to have the backup domain controller kick into action? Can we have them doing load balancing in a perfect scenario?

    TeachMeIT975 pointsBadges:
  • Wireless channel architecture

    In your article of designing 802.11n, you state 'Channel architecture: Nearly all products use multiple channels to create micro-cells, but at least two vendors use a single channel to create one big RF layer. The latter clearly cuts roam time when clients move, but trade-offs are hotly debated.'...

    Nogirs15 pointsBadges:
  • Configuration of Cisco router 871.

    am new to this filed. am now working in one isp. here some customer request public ip ( for example subnet 255.255.255.252) . for internet connection .in wimax connection. its possible to configure both public and private ip both on lan interface . or i should create  nat pool, which will be best...

    Asstnetworkengg25 pointsBadges:
  • VPN client access GRE tunnel

    i have two cellular modems that have a gre tunnel between them. i have vpn client connections to each modem to access each lan however i would like to be able to access remote lan (via gre tunnel?). is this possible?

    Jmf555 pointsBadges:
  • Client Access printer setup

    I replaced the parallel cable to my Epson FX-880 printer with a D-Link 311P print server, and ever since then my Client Access printer sessions start with "Windows Default Printer" even though the .ws file specifies the Epson printer.  I never had this problem until I installed the DP-311P. I am...

    LBurkett99830 pointsBadges:
  • Restrict traffic for Cisco VPN clients

    Hi all, First some background for my question: I have recently set up a VPN tunnel between a Cisco PIX 506E (VPN server) and remote clients. The remote clients use Cisco VPN Client software version 4.8. Everything seems to work fine. But as it is configured right now the remote clients have full...

    Daniel40 pointsBadges:
  • Not recieving attachment in my VLAN emails

    I have two vlans and i have two mail account, one per vlan.outlook (vlan1) and ms outlook 2003(vlan2), problem is that when i send mail form outlook 2003(with sign and attachment ) to outlook express, i dont recieve any attachment in outlook express. when i joined both account in same vlans then it...

    Ranar15 pointsBadges:
  • Central remote desktop using Windows Server 2008?

    We want to do away with all of our one to one nats into our datacenter. Can we have a central remote desktop server using Windows server 2008 and if so what do we need to do to get it working/configured?

    TeachMeIT975 pointsBadges:
  • CCNA vs Jobs?

    Hi there,can i get a job after completing CCNA?

    Abs5 pointsBadges:
  • network engineer CCNA advice

    pls tell me the procedure to become a network engineer.now iam doing 3rd year computer science engineering.may i do ccna course now onwards??????

    Ananthnithu10 pointsBadges:
  • network engineer – certifications required

    is this ccna valid course to become a network engineer

    Nithu5 pointsBadges:
  • NAT configuration

    i have three vlans of private addreses that obtain their addresses through dhcp..now i need to translate these private addreses to public addresses using dhcp! i need help

    Ropam25 pointsBadges:
  • How to determine what type of RAM in inside a remote computer

    Hi All, Is there a free application that can give me the following information about any remote client I remote into to 1. type of ram and speed 2. processor 3. type of video card Any help is much appreciated Regards Shane

    shanekearney810 pointsBadges:
  • WAN traffic utilization report

    How can we analyze traffic utilization of WAN connections? We have a Ethernet handoff going to our sonicwall as our default gateway.

    Karl Gechlik9,860 pointsBadges:
  • Networking

    Why is it useful to have both a logical design and a physical design of a network?

    Jjrcol15 pointsBadges:
  • How do I bond 2 T1 together usinig a Cisco 2811?

    How do I bond 2 T1 together usinig a Cisco 2811?

    Rjratcli5 pointsBadges:
  • Want to win a title off our Networking Must-Reads List?

    If you'd like to win Deploying and Troubleshooting Cisco Wireless LAN Controller, straight off our must-reads for networking professionals list, simply answer one of five questions and post the link to your answer in the discussion area below. Fault tolerance on a web server Round robin for data...

    MelanieYarbrough6,345 pointsBadges:
  • Power for new Data Center with 7500sqft of technical area and will host high density, mainframe, storage and network infrastructure.

    I am looking at the power requirements for a potential New Data Centre. The Centre is going going to be 7500sqft of technical area and will host high density, mainframe, storage and network infrastructure. I worked on 1500w per square metre. Do you think this is too much for a new centre that will...

    Mrjay5 pointsBadges:
  • Upgrading from Windows Server 2003 to Windows Server 2008

    We are looking to upgrade our Windows Server 2003 Active Directory network to be a Windows Server 2008 AD network what will I need to do and in what order? The member servers or the AD machines first? We are running 2003 in native mode. There is also an Exchange server.

    NewnanIT1,110 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following