• Intervlan connectivity

    Hi All, I'm looking for solution/help to solve this issue. Scenario: Two vlans (Data & Voice) are created in my switch (3560). I 've voice router (2900 series) & braodband gateway which connects to the service provider. [strong]Note: Two vlans are connected to two different interfaces of a router...

    RGPrakash170 pointsBadges:
  • Call Divert to Mobile for non UCCM User using Cisco Voice Gateway

    Hi, I have a requirement for a DDI number to be on permanent divert to a mobile.  The user does not have a account on the call manager, nor does he need one.  I just need to provide a Land-line number so it can divert to his mobile.  What is the best way for me to achieve this with the lease...

    KiNNik5 pointsBadges:
  • Roaming Profile with Wireless Connection

    On our school network we have wireless access for the principal and the teachers who use laptop computers. The server runs Windows Server 2003 and all clients run Windows XP Pro. The school is in two different buildings and the principal and computer teacher both travel from one building to the...

    Yankusbobicus120 pointsBadges:
  • Need a stable wireless router – what one to get

    I currently have a D-Link WBR-2310 serving as the outside router for my network, and it likes to reboot irregularly. Sometimes it reboots a couple times a day, causing disruptions for our users who complain mightily. I've updated firmware to the latest (v1.05) and it continues to reboot...

    Fishmahn55 pointsBadges:
  • Inbound traffic is coming from router IP, not internet IP. Why?

    Hello, thank you for your time. I have recently noticed a strange occurence going on with inbound traffic. The other day, I helped my friend set up his network. icmp ping was good. while sniffing, I first noticed inbound tcp traffic to me was not coming from my friend's IP address, but coming from...

    Robert5795 pointsBadges:
  • DHCP Windows Server 2003

    I had a quetion in my mind. Assume [strong]2 site [/strong]are there in a forest. in [strong]site A[/strong], all systems are dhcp clients. In another [strong]site B[/strong], all are not dhcp clents. can i configure dhcp server exist in site A to assign ip address to site B systems. is it...

    Aravinda60 pointsBadges:
  • Computer network subnetting

    I want to connect 125 computers in a network to the internet, I only have 4 public IP addresses. the computers are in the range of 172.16.1.1/16 through 172.16.1.125/16. What else do I need to allow these computers to access the internet?

    Melyndalea5 pointsBadges:
  • Difference in Switches: Linksys and Alcatel-Lucent

    I need to set up a network with over 100 workstations. When I asked 2 vendors (Alcatel-Lucent and Linksys), both provided the switches I wanted, but the price difference is huge. Thinking positively, there must be something that makes the price differs a lot. But what? What is the consequences if I...

    Ewinata5 pointsBadges:
  • VLAN implementation

    Why do we need to implement VLAN in our Network and how to configure a switch to be part of a VLAN

    Oluwethu20 pointsBadges:
  • Layer 3 Switches

    Can Layer 3 switches connect direct to WAN with out a Router? If yes, Why choose Routers?

    Bha77a40 pointsBadges:
  • Tellabs 8110 and Cisco 2811 not connected

    hello! in my office we have a cisco 2811 and a tellabs 8110 to connect to over vpn . since 3 days ago my modems line1 led started blinking and DMA led went on. what should i do? many thanks in advance! erfanmoradimail@gmail.com

    Afshinmoradi5 pointsBadges:
  • Teaming Cisco switch ports for redundancy

    Is there a way to team 2 cisco switch ports so that if a cable is accidentally pulled, a user multi-million transaction wont be affected at his desk. How can we make sure that if a port goes down, a user's pc is still up?

    1478525 pointsBadges:
  • Suggestions for CCNP books

    Could anyone suggest me which book i should prefer for CCNP study(writer)

    Sunilpbh195 pointsBadges:
  • Multiple Vlans with two router on a stick in the same network.

    Hello Guys.. I have some problem with existing router on a stick Vlan consist of six VLAN ID, I try to add additional router with route on a stick VLAN with different VLAN ID in the same network, the problem is this new VLAN cannot access to the network it seem like the packet of this new VLAN...

    Bsm122045 pointsBadges:
  • Cisco 2811 ccme config

    Hi guys, I have two Cisco 2811 routers. Each of them has 2 Fast Ethernet and 4 7960 ip phone. i need to set it up for lab purposes. how do i configure this?

    Joshlo5 pointsBadges:
  • Intervlan routing and internet access

    I configure 2 vlan on my l3 switch 3560,  1) vlan 1 192.168.1.0/24 2) vlan 2 192.168.2.0/24, Intervlan routing is working fine. Now i connected one router 1841 to l3 switch on port fa0/4 (which i issue command no switch port and give ip address 192.168.3.5/24) router interface is f0/1 ip address...

    Ekansh400 pointsBadges:
  • Can’t open PDFs from certain websites

    I am long-winded, so please bare with me! We are having trouble opening pdfs on certain websites. Currently PDPworks as well as one of our vendors who uses twelvehorses.com as a pdf server. We are unable to open a pdf from pdpworks at all and are hit and miss with opening pdfs from...

    erin0201215 pointsBadges:
  • Client not doing ping by name to server

    one desktop system is doing ping to server by ip address but not doing by server name then how to sort out this bug from desktop sytem?

    Yogender270 pointsBadges:
  • Bandwith distributions in CMTS

    hi to evreyone" ; can u discuss me on how to distribute or how to control a bandwith inside the CMTS.WHAT migth be the software program that we are going to used in order to control the bandwith in each menimum priorities in terms of Kbps? pls help me ''.. thank you very much. Arnel,

    03062620 pointsBadges:
  • Recommend Cisco Home Lab

    Please give me your thoughts on the best way to setup a Cisco home lab. Although I need to re-certify my CCNA my focus is to take a deep technical dive and master Cisco before going on to next level(CCNP). I work with Cisco but want my own lab to experiment and try different topologies and...

    Learnteach165 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following