• Memory Allocation

    Hi Guys, I?m in a sticky situation here. I have a 3640 which hangs for a couple of minutes every night when there?s a scheduled backup going on the LAN(For a couple of minutes all my WAN links start bouncing) . Basically the traffic goes from one Ethernet to the other. When i initiate the ?sh...

    Tintin7770 pointsBadges:
  • Configuring Multiple Internet Access Points

    We currently have a hub and spoke topology where all nine remote sites come back to HQ for Internet and server access. We have one site that uses about 60% of out Internet bandwidth, so we decided to drop a dedicated T1 Internet line at this site for this site's use only - all other sites will...

    Pooled0 pointsBadges:
  • Exchange 2000 issues

    I seem to have 2 issues. Both are on the same setup. Windows 2000 Server running Exchange 2000. Both have all the latest patches and SP's. 1) Mail will flow inbound just fine. Some mail will flow outbound just fine. Certian addy's just have in the SMTP queue ( AOL,Yahoo, Bellsouth ). Other mail...

    Aclark950 pointsBadges:
  • Help required in configuring ISA server 2000 firewall

    Hi all, I have some queries related to Microsoft ISA server 2000. First of all I want to provide some info about my network. In my network most of the systems are using different flavor of MS windows and one computer (call it server1) is providing internet access to all the other computers...

    Iazher0 pointsBadges:
  • telnet error-backup authentication

    hi all, i did something really stupid and now i need a quick help.i have a cisco 3661 router.i was just roaming around and just having a look at the configuration.i don't know what i did wrong but when i tried to telnet the next time, i m not able to enter the password for starting telnet...

    Xevier0 pointsBadges:
  • can’t receive mails-2

    hi all, we are able to send mails but are not able to receive from outside.is the problem with DNS or routing or anything else ? thanks for help...

    Xevier0 pointsBadges:
  • Cisco ACS, PIX and VPN problem

    I am trying to configure Cisco PIX to accept vpdn connections that will be authenticated by the Cisco ACS after looking up username and profile details in Active Directory. I am seeing failed attempts on the ACS - so I think the config is ok (below) access-list acl_in permit ip 10.xxx.xxx.0...

    Silks1010 pointsBadges:
  • can’t receive mails

    hi all, we are able to send mails but are not able to receive from outside.is the problem with DNS or routing or anything else ? thanks for help...

    Xevier0 pointsBadges:
  • two problems

    hi all, i have two problems : 1. i configured ip on a win XP m/c that had two LAN cards , one for internal LAN and another for external.the problem is that when i ping the system with its hostname or local host ip "127.0.0.1" it pings but when i ping using either of the ips i configured on cards it...

    Xevier0 pointsBadges:
  • command for restricting users to one limit on cisco AS5300 at a time

    Pls I need a command that will enable me to limit the access of dial up users to one log on at a time. I used username name user-maxlinks 1 password pwd. it still allow one username to be used more than one user at a time. pls waiting for responses

    Bidemi0 pointsBadges:
  • Bandwidth Limit on Cisco 3550 catalyst switch on gigabit interface or using Access list on the router with ip address

    Dear friend, I have a cisco 3350 catalyst switch, I want to limit bandith on that interface to 64kbps, I need help on this. I need to know another way of limiting the bandwith using access list on the ip address assigned to the host on that interface. send your reply to : akeemogun@yahoo.com

    Bidemi0 pointsBadges:
  • MS Office Outlook 2003 Address book

    I use MS office outlook 2003 but this is not adding the e-mail addresses to the address book/contacts automatically when I reply to someone. This feature is available in Outlook express but I didn't find this feature in MSOO 2003. Is there any simple way I can add e-mail ids to contacts /address...

    BinooDas123410 pointsBadges:
  • vlan configuration

    hi i'm having problems to configure vlan on a zoltrix 16-port switch. the switch does not have a console port but have jumpers with 'home vlan' and 'trunk' labels. please help. note: very urgent

    Noorabt0 pointsBadges:
  • Slow File sharing access in Win 98-2

    Actually I have 2 questions: I have a small workgroup of 3 XP Pro systems, 2 win98 systems, 1 win 2000 server and a 16 port ethernet switch(100mbps). I have enabled the ICS in the server and each compter can access files/printers and internet with the help of DHCP. 1) When I access the win98...

    BinooDas123410 pointsBadges:
  • bandwidth distribution

    hi all, can u tell me how isps distribute bandwidth to the customers(both dial up and leased)how to check that proper distribution is taking place and everyone is getting the correct bandwidth.is there any software that could b used to keep an eye?what else can be done?how to control??? thanks...

    Redrose0 pointsBadges:
  • bandwidth distribution-2

    hi all, can u tell me how isps distribute bandwidth to the customers(both dial up and leased)how to check that proper distribution is taking place and everyone is getting the correct bandwidth.is there any software that could b used to keep an eye?what else can be done?how to control??? thanks...

    Redrose0 pointsBadges:
  • SPAN port on Cisco 4000 switch

    I am in the process of setting up Websense (internet access filtering) with my Pix firewall. One of the step in the Websense setup is to set up a SPAN port on my core switch, so that Websense can monitor all traffic. I have not set up a SPAN port in the past and I am looking for some guidance. The...

    Hinesjrh0 pointsBadges:
  • AS400 / windows environment

    Hello, I work for an accounting firm currently on a windows 2003 server domain. We just got a client that uses a AS400 IBM server for thier accouting software/data. Is there anyway to move this server into our office and have it accessible through windows? Is there and emulator of some sort? Any...

    Natethegreat0 pointsBadges:
  • VoIP

    Hello I want to implement the Voice over Ip. i.e Ip Telephony But I have no idea about it. Can your update me about VoIP means what is advantage of VoIP, which hardware & cisco routers i have to use which will support VoIP. Waiting for a prompt reply Thanks & regards Prafulla

    Prafulla0 pointsBadges:
  • Print server

    I'm looking for a usb 2.0 print server that will support a multifunction printer (Epson CX6400). Can anyone point me in the right direction?

    Xixones0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following