• Wireless Networks Interfering with Unix Servers

    I have a customer who has a Unix Server running UnixWare 7.1.3. He bought a 3Com wireless access point from a catalogue, but when he switched it on the Unix Server would reboot. This only happened twice before the unit was thrown at me to fins solution. He has in the offices an access point from...

    Mozza10 pointsBadges:
  • router#tftp error

    hi all i have a cisco 1721 router connected through consol to my pc.i downloaded solarwind tftp server.when i try copy flash tftp;it gives error %Error opening tftp://10.14.11.24/c1700-y-mz.123-1a.bin (Timed out).tftp server is running but not shown in task manager. any help thanks...

    Redrose0 pointsBadges:
  • cannot ping from router

    hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1721 router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the client end i cannot.when i...

    Xevier0 pointsBadges:
  • cannot ping from router-2

    hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1700 series router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the client end i...

    Xevier0 pointsBadges:
  • Wireless LAN roaming

    I need to set up a wireless LAN (ADSL router with 3-4 access points). The client wants to be able to move between the access points without being cut off from the internet. Which products will do the job? Any special design considereations?

    Benbje0 pointsBadges:
  • p-com APG radio

    Has anyone ever used a p-com AirPro Gold radio ? Can you please tell me what should be the LED status during normal operation? Also various other configuration parametres. thanks for help....

    Xevier0 pointsBadges:
  • pinging from a router

    hi all, can you tell me what is the difference between pinging from a router and from a terminal.i have a cisco router.when i ping a remote router from my router it doesnot but when i ping the same remote router with the terminal attached to my router it pings.also sometimes when i ping from router...

    Redrose0 pointsBadges:
  • ping from outside

    hi, could you please tell me which command in cisco routers prevent them from being ping from outside networks. and also how can i prevent terminals inside a network to ping outside ips(group policies etc??). thanks

    Redrose0 pointsBadges:
  • PIX VPN DHCP Relay not relaying DHCP packets

    Hi, I've setup a VPN across 2 PIX506e's using primarily the PDM software. IT is a very basic setup using PDM. I also needed DHCP relay to relay from clients on pix B to pixA and then the dhcp server. So I add in the DHCP relay server address on pixB and point to the relevant IP over the outside...

    Rgoulding0 pointsBadges:
  • Memory Allocation

    Hi Guys, I?m in a sticky situation here. I have a 3640 which hangs for a couple of minutes every night when there?s a scheduled backup going on the LAN(For a couple of minutes all my WAN links start bouncing) . Basically the traffic goes from one Ethernet to the other. When i initiate the ?sh...

    Tintin7770 pointsBadges:
  • Configuring Multiple Internet Access Points

    We currently have a hub and spoke topology where all nine remote sites come back to HQ for Internet and server access. We have one site that uses about 60% of out Internet bandwidth, so we decided to drop a dedicated T1 Internet line at this site for this site's use only - all other sites will...

    Pooled0 pointsBadges:
  • Exchange 2000 issues

    I seem to have 2 issues. Both are on the same setup. Windows 2000 Server running Exchange 2000. Both have all the latest patches and SP's. 1) Mail will flow inbound just fine. Some mail will flow outbound just fine. Certian addy's just have in the SMTP queue ( AOL,Yahoo, Bellsouth ). Other mail...

    Aclark950 pointsBadges:
  • telnet error-backup authentication

    hi all, i did something really stupid and now i need a quick help.i have a cisco 3661 router.i was just roaming around and just having a look at the configuration.i don't know what i did wrong but when i tried to telnet the next time, i m not able to enter the password for starting telnet...

    Xevier0 pointsBadges:
  • can’t receive mails-2

    hi all, we are able to send mails but are not able to receive from outside.is the problem with DNS or routing or anything else ? thanks for help...

    Xevier0 pointsBadges:
  • Cisco ACS, PIX and VPN problem

    I am trying to configure Cisco PIX to accept vpdn connections that will be authenticated by the Cisco ACS after looking up username and profile details in Active Directory. I am seeing failed attempts on the ACS - so I think the config is ok (below) access-list acl_in permit ip 10.xxx.xxx.0...

    Silks1010 pointsBadges:
  • can’t receive mails

    hi all, we are able to send mails but are not able to receive from outside.is the problem with DNS or routing or anything else ? thanks for help...

    Xevier0 pointsBadges:
  • two problems

    hi all, i have two problems : 1. i configured ip on a win XP m/c that had two LAN cards , one for internal LAN and another for external.the problem is that when i ping the system with its hostname or local host ip "127.0.0.1" it pings but when i ping using either of the ips i configured on cards it...

    Xevier0 pointsBadges:
  • command for restricting users to one limit on cisco AS5300 at a time

    Pls I need a command that will enable me to limit the access of dial up users to one log on at a time. I used username name user-maxlinks 1 password pwd. it still allow one username to be used more than one user at a time. pls waiting for responses

    Bidemi0 pointsBadges:
  • Bandwidth Limit on Cisco 3550 catalyst switch on gigabit interface or using Access list on the router with ip address

    Dear friend, I have a cisco 3350 catalyst switch, I want to limit bandith on that interface to 64kbps, I need help on this. I need to know another way of limiting the bandwith using access list on the ip address assigned to the host on that interface. send your reply to : akeemogun@yahoo.com

    Bidemi0 pointsBadges:
  • vlan configuration

    hi i'm having problems to configure vlan on a zoltrix 16-port switch. the switch does not have a console port but have jumpers with 'home vlan' and 'trunk' labels. please help. note: very urgent

    Noorabt0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following