• Discover Network Devices

    I'm new to this enterprise network. How can I determine all of the devices connected to my network. Unfortuantley I'm the only IT guy and just came aboard so I'm very unfamiliar with the network setup and am trying to find the address of a wireless access point so I can login to it and reconfigure...

    J150000 pointsBadges:
  • Routing Between Subnets and between networks

    1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected....

    Chinmoymohanty0 pointsBadges:
  • odd NIC problem

    Howdy all... I have a win2k3 member server with 2 onboard Intel PRO lan connections. One is 100mb the other 1000mb. On the 100mb connection, I can set either a DHCP or Static TCP address and it works fine. On the 1000mb connection, it works fine on DHCP, but absolutely refuses to connect with a...

    TheVyrys0 pointsBadges:
  • 802.11 vs 802.16

    I have a small co. with a point to point wireless grid. I handle off site monitoring of gas nad oil flow. I have been overlaping my grid with new locations, and more to come. So I have been looking into new wireless Sys. I have made the choice to use All-In-One?360 Multi-Band/Multi-Mode Antenna...

    Cablegeeks0 pointsBadges:
  • Installing Printers Based on Active Directory Group

    Hi All, I'm looking to install all my printers based on security groups within active directory I was planning on using the script below: *** START SCRIPT PRINTERS.VBS *** Const IT_GROUP = "IT" Set WshShell = WScript.CreateObject("WScript.Shell") Set WshNetwork = CreateObject("WScript.Network") Set...

    Ladrick0 pointsBadges:
  • Unable to detect a parity error with Windows SDK on a PCI serial card

    We are using a 9-bit protocol which sometimes sends a mark state and sometimes sends a space stage. When a space state is sent we want to be able to get a parity error in SDK. We can see the parity error in the hardware register but we want to be able to see the error with Windows SDK software....

    Kfink040 pointsBadges:
  • Network Resource Allocation cum Planning cum Technical Problem

    This is the real commercial problem face by my company. Well, the reason I ask this problem is I salute and respect all of you as I believe all of you are as good as network solution company out there, or even better!! Lets me rephrase the entire problem again. Company expand so fast that the IT...

    Hunkgym5 pointsBadges:
  • Design NEW network cum NEW IT infrastructure-2

    Company expand so fast that the IT infrastructure is not fast enough to cater high volume of traffic; the initial design is not scalable. The number of new branch offices setup caused the company pay a high price in the leased line communication. Salesman and management staffs dial into company...

    Hunkgym5 pointsBadges:
  • static ip is in the spam list

    HELLO ALL, My static ip is in the spam list. What should I do? Thanks a lot

    UNIVERCITY0 pointsBadges:
  • Event ID 13508 in microsoft windwos 2000 server

    Hi all I have a three servers with windows 2000 (service pack4 ) and its running active directory and DNS also. My global catalog server (PDC) am calling as server ?A? , others are server ?B? and server ?C?. These are two servers are acting as BDCs. One of the BDC?s Hard disk was crashed last week...

    Management0 pointsBadges:
  • Blocking music on internet connection

    Hi all, I have some internet users who listen to online radio stations. I have asked them not to do it, as I feel like it probably uses up a fair amount of bandwidth. Is this correct, or does it use very little? Also, other than purchasing and installing software, is there a way to block music?...

    TheVyrys0 pointsBadges:
  • DDos traffic generator

    Hi all, We are testing SERVICE CONTROL ENGINE of Cisco. I would like to test the SCE for detecting and preventing DDOS traffic. For testing SCE, I need DDOS traffic generator software. I searched in the Google but i didn't get. Can anybody help me to find out a DDOS traffic generator software. Can...

    Mraj270 pointsBadges:
  • keepalive

    HI, I am preparing for the ccna exam. Can any body help me, what is the purpose of keepalive command which we will give in routers when configurin the physical interfaces. Thanks & Regards, Rajesh.M

    Mraj270 pointsBadges:
  • Blocking Music on Internet connection

    Hi all, I have some internet users who listen to online radio stations. I have asked them not to do it, as I feel like it probably uses up a fair amount of bandwidth. Is this correct, or does is use very little? Also, other than purchasing and installing software, is there a way to block music?...

    TheVyrys0 pointsBadges:
  • Domain Admin Group

    Does anybody know of a way to search our Active Directory to see what users are part of the Domain Admins Group. If so, what software and where do I get it. Thanks

    Vman660 pointsBadges:
  • 3com core switch 4060

    Hello i have 2 switches 4060 connected with XRN technologie my problem is that the 2 switches are sometimes freezing the network is down for 3 to 4 sec then the ping request is back online. i have STP enabled by vlan,6 vlans , fiber channel to edge switch,i installed the 3ND for monitoring...

    AbdoAc0 pointsBadges:
  • NMAP IN WIRELESS

    Hello, Can any one explain me what is NMAP , how NMAP works and how to use it. Kind Regards, Gopal.

    Breathe0 pointsBadges:
  • Loadsharing between two ISPs

    dear sir, I am looking for a load sharing solution between 2 leased lines for 2 different ISPs the diagram goes lke this: LAN-->Cisco Pix-->Router-->2 leased lines. can load-sharing be done at the router without extra configuration at the providers side? can CEF (cisco express forwarding)...

    SkullyMJ0 pointsBadges:
  • WIRELESS BRIDGES

    Dear Sir's, I have two wireless bridges. Master and Slave which are 800 ft apart and two high gain antennas are attached to these units. I am finding a disconnection problem with these bridges. It works for a while but gets disconnected and after doing powercycle on the slave end the bridge starts...

    Breathe0 pointsBadges:
  • Stop bit problem: USB to Serial Converter attached to motion controller, unable to set for 7-E-2

    I have three different USB to Serial converters, one of them an isolated converter from B&B. One brand of motion controller I work on uses EVEN parity / 7 data bits / 2 stop bits as its default. I find that none of my converters will work on the controller in this configuration. If I borrow a PC...

    Kfink040 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following