• Where Do I Begin

    Often, those already in Networking, forget that they once too were novices. I am currently trying to make sense out of cisco routers. Terminolgy and verbiology does not make a whole lot of sense but I am able to search the internet for explanations. My company does not have funding for cisco...

    Justincase0 pointsBadges:
  • Active Directory/DNS problem in Windows 2003 network

    I have just upgraded my 2 DC's to Win2003 (I totally recreated Active Directory and did a clean install). I set the first DC up with DNS which seemed to work fine. I then set the 2nd DC up with active directory integrated DNS. That seemed to work fine too and it populated itself and generally...

    ITBird15 pointsBadges:
  • Remote Desktop conflicts with VPN

    I am connecting using Remote Desktop from my Laptop PC (Windows 2000 Pro Sp4) to a Server (Windows 2000 Server Sp4) in our DMZ over our Corporate Network. I am then using a Network & Dialup Connection on the Remote Server to connect over VPN to our Customer Sites. However, this is currently...

    HenryKafeman0 pointsBadges:
  • Guest or Cleint Need Internet COnnection Through Access Point from Proxy Server

    Hello Lisa, Hope you are doing fine. Actually I had problem at my client place. The Internet is configure at server whos having two NIC Card, one for internet n other for Internal Network. Cleint getting internet connection through proxy. Now we included one Access Point to expand the network at...

    OnlineTechSupport0 pointsBadges:
  • Is Cisco Wireless .g radio backwards compatible with .b?

    Hi, Please can someone tell me whether the AIR-MP21G-E-K9 802.11g radio that we have in our Cisco 1200 series access point supports both 802.11g and 802.11b clients? If so, do I need to do anything to the running-config of the device to support both types of client? Thanks in advance. Greg.

    GregNottage0 pointsBadges:
  • Securing FTP on an Enterprise wide basis

    One of the recent questions here in the SeachWindowsSecurity.com ITKnowledge Exchange was stated the poster had blocked email services with a Proxy server so that internal employees could not obtain yahoo, AOL, and other external sources of security threats and the poster wanted further support in...

    CasR22070 pointsBadges:
  • Implementing and configuring VPN Server

    Hello, Shiraz, I want to implement n configure VPN Server, so that my mobiles users and employee can access there file and network through Securely VPN Connection. Can any body help me out of this.. I need complete n detailed about VPN Configurations. What Hardware n software do i need to have...

    OnlineTechSupport0 pointsBadges:
  • Installing Seperate Internet Connection for Managers

    Hello, Myself shiraz, I got one problem. There are Five Floor in one Office which has Switches COnneted to each floor. They are getting LAN and WAN Connection through Centralized Wireless Server Room. Also We have access point to get connectivity from Head Office, which is just near to us. And that...

    OnlineTechSupport0 pointsBadges:
  • Network solution

    Hi, Here is my small network: 1-it is in four floure apartment 2-have a central Hub and two Switch without giga port and giga moulde suport(all is 10/100 port)in first floure 3-Threre are one switch(10/100/)in every 3 other floures that connected by one port to a port of the Hub in first floure...

    Aliyani265 pointsBadges:
  • Library management system

    i need a free library management system running on window or linux that can keep track of who has what cd/books any one help plse

    Eduado0 pointsBadges:
  • TCP Retransmissions.

    Hi, I am trying to troubleshoot poor telnet performance over our WAN, and have come up against a figure for re-transmits that I consider to be too high. Looking at the device, the re-transmits are currently 7.5% of all segments sent. I have looked at another device to try and get a feel for an...

    DerekKing0 pointsBadges:
  • Learning Protocol Analysis

    I need a couple of recommendations for material on learning to read packet captures and protocol analysis. Has anyone read the book Ethereal Packet Sniffing? From a review I read, it seems like it might not be much more help than the Users Guide .pdf that you can get with Ethereal. Has anyone used...

    PaperMaker0 pointsBadges:
  • Power over ethernet

    How does Powere over ethernet connect from a switch for wireless?

    Cchavez0 pointsBadges:
  • genereal problems in OSPF network.

    Dear all, I have one question in my mind.. What kind of problem can occure in established and running OSPF network. I m working with one of the big ospf network but i havent seen any kind of problem in existing OSPF network. But lots of ppl asking the same question. Can any body help me... I just...

  • NT TCP/IP failure

    I have an Armada 4120T with a Xircom 10/100/56k 16bit adapter & NT4 sp6a The adapter works fine in another laptop. A 340MB PCMCIA hard disk works fine in the Armada. I am using the latest Xircom drivers and the adapter shows up in PCMCIA adapters ok. The problem is the adapter does cannot pull an...

    Joelsplace0 pointsBadges:
  • Ethernet

    Hello, I am working on Embedded Ethernet, without using a MAC controller on my Board. I have created ethernet packets and am transmitting it from the board. The packets are not received on PC and Protocol analyzer indicates CRC error. But I am sure that the CRC calculated on the board is correct as...

    NaeemMemon0 pointsBadges:
  • Ethernet

    Hello, I am working on Embedded Ethernet, without using a MAC controller on my Board. I have created ethernet packets and am transmitting it from the board. The packets are not received on PC and Protocol analyzer indicates CRC error. But I am sure that the CRC calculated on the board is correct as...

    NaeemMemon0 pointsBadges:
  • TCP/IP Netbios Helper – Can it be disabled?

    I'm trying to eliminate some NetBIOS traffic from a new 2003 AD domain recently upgraded from NT4. I've disabled Netbios over TCP/IP without any negative effects, but stopping the TCP/IP Netbios Helper on WinXP clients seems to bring NETLOGON-type functionality to a halt, and I don't get name...

    Jimwells0 pointsBadges:
  • Converted from a Twinax connection to TCP/IP on a Iseries/AS400. We are printing to a HP4100 attached to a network thru a RMTOUTQ (remote output queue)

    We converted from a twinax connection to a TCP/IP connection on a Iseries/AS400. We have a HP-4100 connected to the network. After the conversion from twinax to TCP/IP. I attempted to print a manifest report from the Iseries/AS400 to the HP-4100 and the print shrunk from 13 CPI to 20 CPI. This...

    Ceevainc0 pointsBadges:
  • PIX – Allow UDP replies in.

    Hi All, The president of my company has started to use skype (www.skype.com). There is a function in the program to do file transfers. When we try that the program show that it has to relay the transfer and when it does that it limits the bandwith to 0.5kB/second. I've pasted the documentation that...

    Dansken0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following