• When do we get Multiple Prefixes in a Router Advertisement?

    Can any one please explain me the use case scenarios in which, a host gets Multiple Prefixes in a Router Advertisement?? I wonder when does a link needs more than one global prefix. If any one knows this pls reply

    RavikanthGudla0 pointsBadges:
  • Who is responsible for the Firewall

    Our information Security department is different from the network group. Currently, we have Check Point firewalls running on Nokia boxes (IPSO image). The Network group handles the installation, upgrade, routing and IP address specification etc on the firewalls, while Information Security writes...

    Muneanya0 pointsBadges:
  • Looking for clarification on new IP layout

    I currently have a 192.168.1.0/24 network. I have one cisco router with many cisco switches that allow everyone to have a DHCP ip of 192.168.1.X. I will soon have more people then the /24 will handle, so I would like to switch to: 172.16.30.0 subnet 255.255.254.0 mask 172.16.31.255 broadcast That...

    Kevins740 pointsBadges:
  • Server 2003 network – 2 NICS

    I have a server 2003 with 2 nics internal 192.168.10.1 255.255.255.0 no gateway 192.168.10.5 DNS external 10.1.10.5 255.255.255.0 10.1.10.1 gateway 68.87.76.178 dns Internal nic handles the DHCP 192.168.10.150-190 it has the scope options with the gateway 10.1.10.1 that is the comcast modem. and...

    Calitech0 pointsBadges:
  • TCP Retransmissions b/c of Checksum Incorrect

    We have a problem where some users will complain of slow application response time (on the LAN) from our ERP server, but others will be fine. After many hours of troublshooting I've discovered the following: - Packet Sniff's of affected users shows TCP Retransmissions because the Checksum is...

    Tbitner510 pointsBadges:
  • Connecting 2, 3 or 4 sites over MPLS

    Hi. I have some routing experience but I don't have much experience routing over a service providers MPLS network and had some questions.. Say I had 3 sites in different cities. I want to be able to route my data traffice to each site. I would like to use a MPLS provider. Does the provider hand-off...

    ChicagoTechie5 pointsBadges:
  • I want to know difference between NetBIOS and computer name

    briefly netbios and computer name

    Nirmalchaudhari5 pointsBadges:
  • wireless vlan

    hi all, is it possible to have one link from a switch to an access point and split the network into two networks a wireless network from the AP and a wired port for a user connected thru RJ45 and still keep it secured.

    92220990 pointsBadges:
  • Installation and updates

    Howdy folks, Tryin to keep things going around here....need some advice. I have Win2003 servers and Active Directory.....single domain....approx. 100 client computers.....one location. Am upgrading all computers from Office XP to Office 2003. My project: Install Office 2003 and all updates remotely...

    TheVyrys0 pointsBadges:
  • layer 3 issue on a layer 2 device.

    I have a 2950 switch and its set only as an Access layer switch. uplinks arent even trunked. im using the native VLAN for mgmt and a different vlan for the users. the switch is being able to work as layer 2,switching packets. but im not able to ping the IP for the mgmt VLAN. there is a default GW,...

    Tafiela55 pointsBadges:
  • ROUTING INFORMATION PROTOCOL

    why routing information protocol employ user datagrame protcol over transmission control protocol

    Saad5 pointsBadges:
  • Dynamic updates to a DNS Server

    What Windows Operating Systems support dynamic updates to a DNS Server? Which service needs to be running on the clients?

    1111100 pointsBadges:
  • What is NAT port forwarding?

    Describe in brief how you would set up port forwarding on a NAT router to allow a PC on the LAN to publish its web to the internet.

    1111100 pointsBadges:
  • messaging and collaboration

    What is messaging and collaboration,how does it works,how to set it up ,where can it be implemented and how

    Eduado0 pointsBadges:
  • g.729 3rd party VOIP on Cisco routers QoS – am I doing it right?

    Hi, I am unsure about which configs are sufficient for implementing QoS on 2 2600 series routers over a 2MB serial link. On one side is the IP pbx and there are up to 6 IP phones plugged into a switch on the other side. We are using a non-cisco VoIP product using g.729. From what I can see all I...

    Robbieg0 pointsBadges:
  • Configure an EtherChannel between 2 switches and a server

    I have a customer wanting me to do a couple of things that I need clarification on. First I have an existing catalyst 4006 switch that we are adding a new module to (mod 6). We also are putting in a new switch (catalyst 2948). The customer is wanting to trunk the 4006 to the 2948 on ports: on the...

    Hocmat230 pointsBadges:
  • simple remote administration

    hey y'all... is there a way to do the following remotely? change passwords create a share on a server hard drive I have the adminpak installed on my workstation which allows me to do it. I want to be able to do it from ANY computer on the network. I have Win2k3 servers only, and WinXP clients only....

    TheVyrys0 pointsBadges:
  • RDP–Remote Desktop and Wireless Networking

    I've found many blogs, forums, and other websites related to my problem, but none have provided me a specific solution. I'm running Win XP Pro on a VAIO desktop hard wired to a Belkin wireless Pre-N router. On the other end is an HP Pavilion wireless laptop. PROBLEM: During a Remote Desktop...

    Drndrn0 pointsBadges:
  • Ristricting sites in group polices on server 2000

    hey, i recently tried to restrict certain sites in group polices for a particular group on my network, however the restriction seems to have replicated itsel to the other policies on the network including me the administrator. I went thru the group policies etc., internet securities, so on and so...

    Intuition0 pointsBadges:
  • IP address conflict

    Two businesses are running Small Business Server 2000, each are set to the default 192.168.0.x subnet. Business 1 need a `teleworker? VPN connection to business 2 but there is an IP address conflict. How would you resolve this?

    1111100 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following