• Zebra ZM400 network configuration

    How do change the printers name and IP address from the printers LCD?

    JDamage5 pointsBadges:
  • HP Laserjet printer problem

    When I login with administrator, the printer is working fine but when I login with the domain user (Active Directory user), it does not print. I have a HP Laserjet 1018 USB local printer and the computer in which the printer is attached is XP and my domain controller is Windows Server 2008. Please...

    PRITHVIRAJBAFILA50 pointsBadges:
  • How to add a printer in a network?

    I've a internet connection having IP (123.237.122.222). there are 7 wifi enabled laptops,one access point and one network printer, printer has not any wifi port, it has only RJ45 port and one usb 2.0 port. every laptop access internet through access point. but i want to share the printer on IP...

    Ranjeetkmr210 pointsBadges:
  • Unable to connect to printer through network

    We have been trying to connect one of our user's office printer (HP Laserjet 3055) to the network.  Most of our users are working from an HP Thin Client to connect to their VMware session.  Manually connecting it to the Thin Client was causing too many issues so we attempted to give the printer a...

    Littlejuanito7420 pointsBadges:
  • Printing in network printer with Windows XP

    i am a foxpro 2.6 for dos user. i printed from the software through a net work printer when the os is windows me. now i cant print in xp. i got the windows test page now. but from dos i cant. how is it possible. pls help me

    Ravanan20 pointsBadges:
  • ISeries Report printing to network printer – font too small

    We have an AS400 print file which is defined with: 10 CPI, 6 Lines per Inch, Width of 132, Length 66, Font Idetifier is *CPI. We were using an AS400 print emulation session to print the report but want to get rid of this and use a device/outq on the as400. The report prints to a networked HP4050...

    Lehanb30 pointsBadges:
  • how to rectify error of spool admin?

    I configured a network printer with IP address with all the entries and it is showing available in connection check . but when I am trying to give a print it is saying "Unable to connect to output processor" and "(SAP)LPD cannot accept request (Queue samsung disabled?)" can anybody help me

    Alabusani15 pointsBadges:
  • Konica Minolta Bizhub di1610 won’t print on legal paper

    I'm not sure if this is the proper forum for this question but I'm out of ideas. We have a Konica Minolta Bizhub di1610 printer. This printer doesn't have a built in NIC so we used an Axis Communications Network Print Server connected to the parallel port to get it on the network. It works fine...

    Lemonjello100 pointsBadges:
  • okidata 590 printing garbage

    I have an Okidata 590/591 printer. An operator sent an eroneus print job and it won't stop printing garbage.  Help How can I clear it?  

    Gieannette5 pointsBadges:
  • Network printing through OpenVPN

    I set up an OpenVPN server in bridged mode - using tap0 - and client both running CentOS 4.4. The VPN works perfectly, except for printing from the client LAN - 10.1.2.x/24 to the server LAN - 10.1.1.x/24. I am using a HP 1320n network printer with IP 10.1.1.100 on the server side. I can telnet to...

    Skyfly2215 pointsBadges:
  • Printer setup

    i have HP deskjet F4288 series printer. Please explain me the steps to connect this printer in LAN with 4 computers. The computers are not in LAN. I want to connect.

    33995 pointsBadges:
  • how do i remove password from printer

    Hi, I have problems with our Nashuatec 25000 on > os i was configuring a password, by mistake i Press a wrong unknowngly and the password was activeted, then The device prompt me to loging with Password and user name which i do'nt know it please help how to remove this password?

    Emal20095 pointsBadges:
  • networking share printer

    how could a printer be shared through router connection with several computers. series connection.

  • Windows XP Peer to Peer networked printer troubleshooting

    The HP 1505n network printer was installed as a Network printer was successfully completed. Run a test print but did not print. The document failed to print. I have a Windows Peer to Peer network linking 6 computers. The printer is installed on one local PC with the USB cable share the resources...

    Sdr5 pointsBadges:
  • Cannot print multiple copies to HP Laserjet 2055DN network printer

    No matter what program we print from (Word, Excel, Notes mail, even notepad) we only get 1 copy that prints even when we change the number of copies to 2 or more.  I've checked printing preferences and the printer properties on the network queue and cannot find anything that refers to this...

    Jean43370 pointsBadges:
  • HP P3005 setup encountered server problems

    Hi , We have NW printer HP P3005 .I can connnect this from all my windows xp system by installing this printer as network frm the hp driver setuo. and one of my winxp system getting the error messsage .HP P3005 setu encountered a problem ,restart and run setup again. But the same error is...

    sumeshbnr1,675 pointsBadges:
  • A LAN shared printer issue

    I have facing a problem on my lan networking that is  when i connected a shared printer a message is apprear''The network path was not found." but when i restart my computer it connect that computer. and the other system r connected that computer. the same thing is happning when i connect with a...

    Aaina20045 pointsBadges:
  • network printer not working in terminal services

    I have an HP Color Laserjet 2600n on our network. I can ping it just fine. I can also print to it from one windows 2000 terminal server but not our second windows 2000 terminal server. It was working fine on terminal server #2 but all of a sudden stopped working a couple of weeks ago. I have...

    Buddyfarr6,850 pointsBadges:
  • Re-issuing IP addresses to network printers (HP 2600N)

    I have a couple of HP 2600N printers on my network, I issued them static IP's and also passworded them. Mistakenly I removed them from the DHCP server, now I cannot access them thru web interface and even when I tried manually reset it so that it can pick IP addresses from the DHCP server, it did...

    Bchika45 pointsBadges:
  • Printer Migration

    II'm trying to migrate printers from one 2k3 server to another using ms print migration tool 3.1 I created the backup on the server I'm moving the printers to. However when I run the restore it errors out at this point: Enumerating printer drivers for environment Windows AMD64. Restore-compromised....

    Rudy15 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following