• NIC Card issue

    site 1 and site 2 are members of stt.com. servers in site 1 have normal connections, share access to a data server is available to site 2, remote desktop is functional to data server, upgrading of antivirus fine. Sometime later in the day, connection to shared access is lost from site 2( not...

    Bfsteel45 pointsBadges:
  • Ethernet adapter question

    Hello, I have a laptop here that for some reason is sending out billions sometimes even trillions of packets it just keeps rising! I have reinstalled the NIC driver and tried a different NIC but the same thing keeps happening! I have also renewed the IP, flushed DNS, reinstalled the network stack,...

    Natethegreat0 pointsBadges:
  • Batch file to disable or enable network adapter

    Dear all, Is there anyone that knows how to write a batch file to enable / disable local area connection just by 1 click on the batch file? Thank you so much...

    Powerofnetworking45 pointsBadges:
  • VMware server 3.5

    Hello, What is the cheaper package I need to have two virtual machines running on the same server, sharing the Network card, that can actually see (ping) each other? Can I do this with the Standard or enterprise VMware ESXi that has no cost? Thank you and best regards,

    CiscoEngineer5 pointsBadges:
  • NIC card suppliers suggestions

    What are the top worst nic cards and / or worst suppliers of nic cards?

    Amacduff10 pointsBadges:
  • HTU-E1 Leased Line Modem

    hi,can anyone tell me how to take loop test on HTU E1 Leased line modem to test physical connectivity

    Xevier0 pointsBadges:
  • Limited Connectivity in a Network Enviorment

    I have been having this problem on serveral PC's. I have to setup up a new PC on our network and i am getting a limited connectivity error on the NIC card. I have checked all the setting on the PC. I tride to use another PC and i got the same error. I looked into the SP2 error and the recommended...

    Sterling0125 pointsBadges:
  • Half duplex vs full duplex

    Recently the application running on one of our clusters had problems when some of the servers had problems accessing the NFS storage. The analysis showed there to be a mismatch between the QFE interfaces and the network protocol. The QFEs were operating at half duplex while the network was...

    Kechild5 pointsBadges:
  • How can I find some AS400 Communication Utilization Statistics

    Specifically, we just installed an additional 5706 card (1gb Dual Port Network Interface) onto our Production Partition (550) to increase remote port availability. We were running out of ports (TCP100D) and it was recommended we add aditional 5706 card. The card has been added and now management...

    Gambitt7150 pointsBadges:
  • What will make an analog signal?

    Does the communication between two network interface cards (NICs) of a computer connected by a Cat 5 cable in a digital signal form or an analog signal?

    NetworkingATE1,545 pointsBadges:
  • DNS server resolves 2 port card incorrectly

    We recently installed a new partition with a 2 port ethernet card. Each port has its own IP address and connections through the network work fine. The problem is that both ports are known to the DNS servers by the one system name so when a DNS name lookup occurs, some users are directed to one port...

    Mike.Butler40 pointsBadges:
  • 2 NIC’s – 1 PC – Connected to DSL and Corporate LAN – How to Route Correctly?

    I have a computer that has one NIC connected to the Corporate LAN with IP address: 10.1.1.50 The other NIC is connected to a small SOHO DSL Router with IP Address 192.168.1.50 I want to be able to connect via RDP from that computer to our servers using the LAN NIC. I want the other DSL NIC to be...

    Noursly0 pointsBadges:
  • internet connection through local subnet

    I would like to set up a windows 2000 server with 2 nics so that the subnet attached to nic 1 could access the internet connection of the subnet attached to nic 2. I only need access to the internet connection, but NOT to the nic 2 subnet. I presume that NAT might be a good idea but would like more...

    Zzegri0 pointsBadges:
  • Shuttle SK43G problem

    I am using a Shuttle XPC SK43G http://eu.shuttle.com/en/desktopdefault.aspx/tabid-72/170_read-4105/ . I have installed Windows 2000 and am having problems with the onboard NIC. I am intermittently seeing the message "Network Cable Unplugged". The onboard NIC is a Realtek 8100B. I have installed the...

    Nickc197665 pointsBadges:
  • Wireless Networks Interfering with Unix Servers

    I have a customer who has a Unix Server running UnixWare 7.1.3. He bought a 3Com wireless access point from a catalogue, but when he switched it on the Unix Server would reboot. This only happened twice before the unit was thrown at me to fins solution. He has in the offices an access point from...

    Mozza10 pointsBadges:
  • cannot ping from router

    hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1721 router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the client end i cannot.when i...

    Xevier0 pointsBadges:
  • cannot ping from router-2

    hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1700 series router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the client end i...

    Xevier0 pointsBadges:
  • Wireless LAN roaming

    I need to set up a wireless LAN (ADSL router with 3-4 access points). The client wants to be able to move between the access points without being cut off from the internet. Which products will do the job? Any special design considereations?

    Benbje0 pointsBadges:
  • pinging from a router

    hi all, can you tell me what is the difference between pinging from a router and from a terminal.i have a cisco router.when i ping a remote router from my router it doesnot but when i ping the same remote router with the terminal attached to my router it pings.also sometimes when i ping from router...

    Redrose0 pointsBadges:
  • ping from outside

    hi, could you please tell me which command in cisco routers prevent them from being ping from outside networks. and also how can i prevent terminals inside a network to ping outside ips(group policies etc??). thanks

    Redrose0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following