• How organizations deal with network design for disaster recovery

    I am looking for some information about how organizations deal with network design for disaster recovery. Specifically, my issue is about DNS domains, and whether to have a single network with a redundant warm site in a single domain shared by production processing, requiring unique IP addresses...

    NetworkingATE1,545 pointsBadges:
  • Creating a Trust between two networks on two routers on same floor

    I have two networks -- the first is 192.168.1.1/24 and the other is 192.168.33.1/24. Each network has it own DSL modem/router for Internet connection and are Windows domains (diffrent domain names). The two routers are physically near (50cm) and the two networks are sharing the same floor. I need...

    NetworkingATE1,545 pointsBadges:
  • Implementing wireless LAN

    Hi! I was planning to implement wireless LAN in my hostel which has ethernet ports. At peak 100 users are using the network,so what type of router should i be looking for?

    Cs50702255 pointsBadges:
  • Getting it all to work together – Network design

    l am setting up a very basic network but still need to be reassured, my network consists of all the following which should all be used: 6 computers 24 port switch 24 port pathcpanel router modem one storage rack The only piece that has put me off is the patch panel as l honestly and embarrassingly...

    clivaldo10 pointsBadges:
  • Connecting 2 NICs with bridge

    i want to connect one NIC with a wireless modem and second to LAN's client.

    Moonthaheem10 pointsBadges:
  • How can I design my networks for disaster recovery (DR) NB?

    We have designed two data centers in different locations. One is the main and the other is disaster recovery (DR). How can I design my networks for DR NB? My main data center is designed with 3800 series with fail over.

    NetworkingATE1,545 pointsBadges:
  • How should I upgrade my network infrastructure?

    I am now upgrading the network infrastructure of my office and I have 10-15 computers. Now what I want to do is to connect to the Internet with a wireless or wired Ethernet connection and connect the Microsoft workgroup sharing with another wired Ethernet. Is it possible to connect a LAN connection...

    NetworkingATE1,545 pointsBadges:
  • How to create network between 5 local locations

    Task: 5 tire sales locations want to their locations to a common application server and possibly an email server. Issues: My brother does business with the company and the owner said that he was quoted $70K to do the job. At the moment, they only have their onsite PC's. I believe that there has to...

    Azdavid995 pointsBadges:
  • Trying to replace old 10-Base t hubs with new technology routers and switches

    There are 200 computers in my office. Which communication mechanism should I use and what type of routers and switches should I use?

    Harjot5 pointsBadges:
  • How to setup a server with data entry software accessible from remote branch offices

    Dear All, How is everyone? I'm new here and want help from you genius guys. Actually I got a new job in IT field, before i was working in other fields but my education is in IT field. I will appreciate if someone can help me. Our Company order for a software for their complete operation and the...

    Atharsiyal25 pointsBadges:
  • Regional office network

    Hello everyone. I am struggling with one of my assignments from university that i really need help on, I've tried so hard but its got to a point where I need someones help! Bare with me on this its a long question. As a brief intro, the assignment deals with creating and configuring a national...

    LondonGMT130 pointsBadges:
  • Network design methodology

    i want do design a network as my end of year project, which methodology can i use

    Mafumu5 pointsBadges:
  • Separation of Physical Networks via VLANs and Security Issues Therein

    Our company is looking to redo some networking infrastructure. Previous IT administrators created a daisy chain network topology and all information types, from APs to workstations aggregate on a single network. Lately we have seen some performance issues and wish to rewire much of our network into...

    Schmidtw11,330 pointsBadges:
  • How to connect two separate Branch Office networks together?

    What is the good and easy way to approach solve the problem of connecting two networks based in two different branches.What are the requirements that I need to furnish and make my small office to be a good highfy company .We run a development in the other branch and need to be connected for further...

    Ayesh25 pointsBadges:
  • What are the disadvantages of the layered protocol approach?

    What are the disadvantages of protocol layering?

    NetworkingATE1,545 pointsBadges:
  • Design question, is it possible?

    I have a concept I need some guidance on to see if it’s possible with DNN. In my concept design, I have a portal 1 engine that's linked to a portal 2 engine transferring information back and forth between them based on a specific set of rules. In portal 1 engine I need to have a different skin...

    BarryBdnn5 pointsBadges:
  • Static and dynamic IP addresses on one NIC

    I am working on highly specialized test equipment in a university lab. I am communicating to the equipment via TCP/IP on a static 192.168.0.XXX subnet. My laptop and various pieces of equipment connect trough a switch. Also, I can connect to the university internet access (no wireless available in...

    RantEng5 pointsBadges:
  • How to configure two Cisco 2600 routers

    Hi, we have two Cisco 2600 routers, one deployed in our main office and the other in our remote site. We also have two DSL connections. We have our Exchange server in main office. Q1. How to configure the two router to use the 2 DSL connections that we have? Q2. How to route our exchange server to...

    Killerj5 pointsBadges:
  • Multiple subnets on one physical network

    I am setting up a fairly large wireless network. We have a fibre connection to the internet for a small community wireless project to give high speed to the 10-20 houses in the area. The router device is a windows PC running with two NIC cards, it is hardened down to very minimal services, with...

    Johnshoff60 pointsBadges:
  • Network Design Problem

    Hi all. I'm so glad we can share our knowledge and experiences in this intimate atmosphere. Here's my problem. Due to my responsibility, I'll have to connect two segments of 5 and 6 nodes(PCs exactly). Now I want to know what would be the most cost-effective policy to link these two segments using...

    yasharkarimzade25 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following