Problem in IBM Server X3400 NIC
Hi, Everybody i will configure ibm server x3400 there r 3 builtin NIC ports, but in the network connection properties there r only 1 NIC show, all drivers are successfully installed, no device driver problem, i am use NIC in LAN and ADSL Modem, how to configure two IP in there….. Please…….. Help me Adv [...]
Answer Question
| November 27, 2009 1:52 PM
ADSL Modem, IBM Server X3400, IP address, LAN, Network connectivity, NIC, NIC Ports, NIC Problem
Hi, Everybody i will configure ibm server x3400 there r 3 builtin NIC ports, but in the network connection properties there r only 1 NIC show, all drivers are successfully installed, no device driver problem, i am use NIC in LAN and ADSL Modem, how to configure two IP in there….. Please…….. Help me Adv [...]
Answer Question
| November 27, 2009 1:52 PM
ADSL Modem, IBM Server X3400, IP address, LAN, Network connectivity, NIC, NIC Ports, NIC Problem
Database offline vs Database stopped vs Database network disconnected?
How Database Offline is different from Database Stopped? How Database Offline is different from DB network disconnection? How Database Stopped is different from DB network disconnection? Appreciate your help.
Answer Question
| December 4, 2008 4:51 AM
Database administration, Database connectivity, Database management, DB2, Network connectivity, Oracle, SQL Database, SQL Server 2005
How Database Offline is different from Database Stopped? How Database Offline is different from DB network disconnection? How Database Stopped is different from DB network disconnection? Appreciate your help.
Answer Question
| December 4, 2008 4:51 AM
Database administration, Database connectivity, Database management, DB2, Network connectivity, Oracle, SQL Database, SQL Server 2005
Event ID:10010
Not able to ping the machine with the hostname/Netbios name.
Answer Question
| December 5, 2008 3:58 AM
Event ID 10010, Network connectivity, Ping, Remote access, Remote connectivity, RPC
Not able to ping the machine with the hostname/Netbios name.
Answer Question
| December 5, 2008 3:58 AM
Event ID 10010, Network connectivity, Ping, Remote access, Remote connectivity, RPC
Ping but not accessible from other systems
is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access is denied.” That is the message I receive trying to connect to one of computers on network. File sharing servies enabled firewall is off
Answer Question
| December 3, 2008 7:53 AM
Network access, Network connectivity, Ping, User Permissions
is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access is denied.” That is the message I receive trying to connect to one of computers on network. File sharing servies enabled firewall is off
Answer Question
| December 3, 2008 7:53 AM
Network access, Network connectivity, Ping, User Permissions
Network location cannot be reached
I have linux shared folder which can be seen from all other PC except this one PC only. My IP and Gateway seems all be okay. This PC has a multilanguage installed (Japannesse). Trying to access network by typing \10.217.1.29 which is my linux server. I got this error ‘The Network Location cannot be reached.’
Answer Question
| December 2, 2008 4:07 AM
Linux, Linux shared folders, Network access, Network connectivity
I have linux shared folder which can be seen from all other PC except this one PC only. My IP and Gateway seems all be okay. This PC has a multilanguage installed (Japannesse). Trying to access network by typing \10.217.1.29 which is my linux server. I got this error ‘The Network Location cannot be reached.’
Answer Question
| December 2, 2008 4:07 AM
Linux, Linux shared folders, Network access, Network connectivity
Can’t connect to sametime limited ver 8.
Well, this is a brand new install of domino /sametime limited domino 8.1 port 1533 is open windows firewall are disabled on both server and client users have an internet password we are using the domino directory not LDAP I am not sure what is going on, when we log into sametime is shows connecting [...]
Answer Question
| November 19, 2008 7:51 PM
Lotus Sametime, Lotus Sametime Version 8, Network connectivity
Well, this is a brand new install of domino /sametime limited domino 8.1 port 1533 is open windows firewall are disabled on both server and client users have an internet password we are using the domino directory not LDAP I am not sure what is going on, when we log into sametime is shows connecting [...]
Answer Question
| November 19, 2008 7:51 PM
Lotus Sametime, Lotus Sametime Version 8, Network connectivity
Loss of Internet access
About every hour or so, I lose internet access. It is as if the computer does not have any DNS info. Other computers on the network are fine. The problem is with a Windows 2000 professional system
Answer Question
| November 19, 2008 12:55 AM
DNS, Internet access, Internet connectivity, Network connectivity, Windows 2000 Professional
About every hour or so, I lose internet access. It is as if the computer does not have any DNS info. Other computers on the network are fine. The problem is with a Windows 2000 professional system
Answer Question
| November 19, 2008 12:55 AM
DNS, Internet access, Internet connectivity, Network connectivity, Windows 2000 Professional
Trying to get my exchange server 2003 via ISP We are using SBS 2003 standard.
My ISP (AT&T Yahoo) is dropping port 110 in favor of 995 with SSL. I am trying to get my exchange server do this with little luck. We are using SBS 2003 standard. Our mail is help at the ISP and direct to us via MX records.
Answer Question
| November 19, 2008 3:21 PM
Exchange 2003, Exchange errors, MX record, Network connectivity, SBS, SBS 2003, SSL
My ISP (AT&T Yahoo) is dropping port 110 in favor of 995 with SSL. I am trying to get my exchange server do this with little luck. We are using SBS 2003 standard. Our mail is help at the ISP and direct to us via MX records.
Answer Question
| November 19, 2008 3:21 PM
Exchange 2003, Exchange errors, MX record, Network connectivity, SBS, SBS 2003, SSL
can’t browse network
At intermittent times of the day or week. I cannot get to the other computers on my network. Users are accessing Qbooks on the network and are usually able to get into Qbooks but sometimes the network printers refuse to work or you cannot get to other computers on the network to access their files. [...]
Answer Question
| November 17, 2008 6:02 PM
Network connectivity, Network troubleshooting, VPN, Windows Server 2003
At intermittent times of the day or week. I cannot get to the other computers on my network. Users are accessing Qbooks on the network and are usually able to get into Qbooks but sometimes the network printers refuse to work or you cannot get to other computers on the network to access their files. [...]
Answer Question
| November 17, 2008 6:02 PM
Network connectivity, Network troubleshooting, VPN, Windows Server 2003
Destination host Unreachable
I am trying to ping 67.192.191.121. But answer comes: destination host unreachable. Few days back, i could do it. But now the message comes that. I am also checking pathping. The answer comes that “one ip address invalid”. What will i do, pls advise me.
Answer Question
| November 17, 2008 9:09 AM
Destination Unreachable, IP, Network connectivity, Ping, Remote connectivity
I am trying to ping 67.192.191.121. But answer comes: destination host unreachable. Few days back, i could do it. But now the message comes that. I am also checking pathping. The answer comes that “one ip address invalid”. What will i do, pls advise me.
Answer Question
| November 17, 2008 9:09 AM
Destination Unreachable, IP, Network connectivity, Ping, Remote connectivity
Windows 2003 server sp2 can’t connect to internet?
Our windows 2003 server can’t connect to the internet ever since we uninstall logmein software to install a remote desktop software. Server gets an ip from cmos and it shows that is connected to the internet but we can’t get it to access the internet is there a setting that i need to do? or [...]
Answer Question
| November 11, 2008 7:14 PM
Network connectivity, Windows Server 2003, Windows Server 2003 SP2
Our windows 2003 server can’t connect to the internet ever since we uninstall logmein software to install a remote desktop software. Server gets an ip from cmos and it shows that is connected to the internet but we can’t get it to access the internet is there a setting that i need to do? or [...]
Answer Question
| November 11, 2008 7:14 PM
Network connectivity, Windows Server 2003, Windows Server 2003 SP2
Our Default SMTP Connector (Virtual Server) is not connecting to remote server
We are using Exchange Server 2003 as our Mail Server with a Front end and two clustered Back-end Servers.From past few weeks our SMTP connector is getting disconneted and the external mails are getting stuck in the queue.When we check the queue information it says that “SMTP Connetor cannot connect to the remote server”. Then [...]
Answer Question
| November 12, 2008 11:20 AM
Clustered servers, Exchange 2003, Exchange 2003 SP1, Network connectivity, Remote servers, SMTP, SMTP connector, Virtual Servers
We are using Exchange Server 2003 as our Mail Server with a Front end and two clustered Back-end Servers.From past few weeks our SMTP connector is getting disconneted and the external mails are getting stuck in the queue.When we check the queue information it says that “SMTP Connetor cannot connect to the remote server”. Then [...]
Answer Question
| November 12, 2008 11:20 AM
Clustered servers, Exchange 2003, Exchange 2003 SP1, Network connectivity, Remote servers, SMTP, SMTP connector, Virtual Servers
Need your help to connect remote sites
I have 4 cisco 800 routers i have configured with NAT and DHCP and they are all connected to the internet via satellite. I have a database server that i want remote sites to access it has an ip 192.168.0.2. All the four LAN’S are on the network 192.168.0.0 255.255.255.0 and they are behind a [...]
Answer Question
| November 11, 2008 9:34 AM
Cisco, Cisco 800, Cisco Routers, DHCP, Dynamic Host Configuration Protocol, NAT, Network Address Translation, Network connectivity, Remote access, Router configuration, Routers
I have 4 cisco 800 routers i have configured with NAT and DHCP and they are all connected to the internet via satellite. I have a database server that i want remote sites to access it has an ip 192.168.0.2. All the four LAN’S are on the network 192.168.0.0 255.255.255.0 and they are behind a [...]
Answer Question
| November 11, 2008 9:34 AM
Cisco, Cisco 800, Cisco Routers, DHCP, Dynamic Host Configuration Protocol, NAT, Network Address Translation, Network connectivity, Remote access, Router configuration, Routers
Shared Internet Connection problem
Hi everybody’ My server running only day time. my server have a two network card one is local net another one internet. my server have internet connection with share. Daily first two hours internet working well after i give the address 404 page not found display. At the time internet ip to automatic ip. That [...]
Answer Question
| November 6, 2008 9:45 AM
Internet access, Network connectivity, Server administration, Shared Internet Connection, Web server administration, Web servers, Windows 2000 Server
Hi everybody’ My server running only day time. my server have a two network card one is local net another one internet. my server have internet connection with share. Daily first two hours internet working well after i give the address 404 page not found display. At the time internet ip to automatic ip. That [...]
Answer Question
| November 6, 2008 9:45 AM
Internet access, Network connectivity, Server administration, Shared Internet Connection, Web server administration, Web servers, Windows 2000 Server
Linksys router issue
We are a small organization using Linksys WRT54G wireless routers in a section of our offices. One router will not accept a change from WEP to WPA2. Attempts to update the firmware (in the hopes that this would resolve the issue) fail both from the external updater and from within the router configuration web pages. [...]
Answer Question
| November 29, 2008 5:05 PM
Linksys Routers, Linksys WRT54G, Network connectivity, Routers, WEP, Wireless networking, WPA2
We are a small organization using Linksys WRT54G wireless routers in a section of our offices. One router will not accept a change from WEP to WPA2. Attempts to update the firmware (in the hopes that this would resolve the issue) fail both from the external updater and from within the router configuration web pages. [...]
Answer Question
| November 29, 2008 5:05 PM
Linksys Routers, Linksys WRT54G, Network connectivity, Routers, WEP, Wireless networking, WPA2
Remote Desktop Connections gone?
We service a number of clients networks using Remote Desktop Connections – generally a very easy access. Today I was unable to log into a server at one site, but as they were having a number of issues, I wrote it off as a specific company problem. Now I am unable to access our largest [...]
Answer Question
| October 30, 2008 11:05 PM
Network connectivity, Remote access, Remote Desktop Connection, Remote management
We service a number of clients networks using Remote Desktop Connections – generally a very easy access. Today I was unable to log into a server at one site, but as they were having a number of issues, I wrote it off as a specific company problem. Now I am unable to access our largest [...]
Answer Question
| October 30, 2008 11:05 PM
Network connectivity, Remote access, Remote Desktop Connection, Remote management
Error metrics on an ADSL modem
I was wondering as to where exactly should I look if I wanted to search for the error metrics on my ADSL modem?? Could somebody also help me as to what the values mean?? What kind of error each value represents etc??? Really need some help here.. Thanks!
Answer Question
| October 24, 2008 3:25 AM
ADSL modem errors, ADSL modems, Modem error logs, Modems, Network connectivity
I was wondering as to where exactly should I look if I wanted to search for the error metrics on my ADSL modem?? Could somebody also help me as to what the values mean?? What kind of error each value represents etc??? Really need some help here.. Thanks!
Answer Question
| October 24, 2008 3:25 AM
ADSL modem errors, ADSL modems, Modem error logs, Modems, Network connectivity
Configure 2 lease line on Same router 2811
Hi All, Currently we are having 1 lease line in our office and soon we are going to have another lease line as backup from other service provider,now the thing is if the provider of the lease line is same then it will be very easy for mr to configure it becoz of same publice [...]
Answer Question
| October 24, 2008 11:10 PM
Cisco, Cisco 2811, Leased line, Network connectivity, Router configuration, Routers
Hi All, Currently we are having 1 lease line in our office and soon we are going to have another lease line as backup from other service provider,now the thing is if the provider of the lease line is same then it will be very easy for mr to configure it becoz of same publice [...]
Answer Question
| October 24, 2008 11:10 PM
Cisco, Cisco 2811, Leased line, Network connectivity, Router configuration, Routers
Windows Mobile access to Server 2003 UNC Shares
What do you need to do to browse UNC shares on a windows 2003/2008 server from a windows mobile device? I have verified network connectivity, can ping the server and I can browse shares of a Vista & XP Machines on the same network. The server systems (2003 & 2008) dont seem to allow it. [...]
Answer Question
| October 29, 2008 5:35 PM
Network connectivity, UNC, UNC shares, Windows Mobile, Windows Mobile Device, Windows Server 2003, Windows Server 2008
What do you need to do to browse UNC shares on a windows 2003/2008 server from a windows mobile device? I have verified network connectivity, can ping the server and I can browse shares of a Vista & XP Machines on the same network. The server systems (2003 & 2008) dont seem to allow it. [...]
Answer Question
| October 29, 2008 5:35 PM
Network connectivity, UNC, UNC shares, Windows Mobile, Windows Mobile Device, Windows Server 2003, Windows Server 2008
POP3 services SBS 2008
i’ve just installed Windows Small Business Server 2008 Premium, and have just set up the pop3 conncetor to pick up mail, its works for about 20-45 mins ..before it turns its self off in services. i have gone in to services and can see that once again its set to automatic (but stopped) and on [...]
Answer Question
| February 5, 2009 11:20 AM
Network connectivity, POP3, POP3 connector, SBS, SBS 2008, Small Business Server, Small Business Server 2008
i’ve just installed Windows Small Business Server 2008 Premium, and have just set up the pop3 conncetor to pick up mail, its works for about 20-45 mins ..before it turns its self off in services. i have gone in to services and can see that once again its set to automatic (but stopped) and on [...]
Answer Question
| February 5, 2009 11:20 AM
Network connectivity, POP3, POP3 connector, SBS, SBS 2008, Small Business Server, Small Business Server 2008
