• one pc can’t access via windows server 2003 network

    in network all pcs are connected together, but one pc not show that shred data. all are in the domain.

    Jaynilesh5 pointsBadges:
  • (Special case) Suggest what should be done to get two pc networked?

    there are two locations: Home and Office both are on the same side of road and distance between the locations is 220 meter aprox. I'm having commercial land-line(BSNL) connection at Office and broadband connection on this line. I have a seamens sl2_141 wireless modem. i recently bought new laptop...

    Vishalgoel00335 pointsBadges:
  • Windows Server 2000′s IP address

    From a DOS prompt how can I find out what my Windows Server 2000's  IP address is and how can I verify network connectivity?

    Troubleshooter24755 pointsBadges:
  • Merging two Active Directory 2003 domains into the same network?

    Our company has merged with another company. We both have 2003 AD domains. We are running separate networks in our office now for each. How can we merge the two networks into one network?

    TeachMeIT975 pointsBadges:
  • Debugging Errors….is that a problem with connectivity?

    I get a lot of "script and debugging" errors when I'm in IE. I'm a teleworker and I use a web based programmed called Siebel to input and research data, which a "debugging or script" error pops up in the middle of and deletes all my informaion. Does that issue have anything to do with connectivity...

    Vrthomas10 pointsBadges:
  • Unable to connect to printer through network

    We have been trying to connect one of our user's office printer (HP Laserjet 3055) to the network.  Most of our users are working from an HP Thin Client to connect to their VMware session.  Manually connecting it to the Thin Client was causing too many issues so we attempted to give the printer a...

    Littlejuanito7420 pointsBadges:
  • Network IP Problem

    We have two Windows XP computers on the same network. One with an IP address of 10.xxx.xxx.120, second one with an IP address of 10.xxx.xxx.121.  When the 120 unit is on the internet, the other unit can not get on. When the 121 unit is on it stops the 120 unit from get out. We have 50 other...

    Ron210615 pointsBadges:
  • Setting up a large home network

    I have a large home and the setup looks like this.  Cable Modem | Dynex Router - 192.168.1.1 - 255.255.255.0 | Belkin Wireless Router 192.168.2.1 - 255.255.255.0 My problem is that the Belkin works very well in all rooms except the far end of the house.  So I purchased a second Belkin Router...

    Ltannenbaum5 pointsBadges:
  • LAN Connection between PC and Laptop

    I have a Netgear router installed on my home desktop PC.  It has been connected to my laptop and working just fine for at least a year.   After problems with my laptop, I re-installed XP and  I can't get the router to reconnect.  It keeps telling me the LAN has been unplugged.  When...

    CindyLThompson5 pointsBadges:
  • Added computers not recognizing Linksys router, network down

    i need to reset my network but none of my added computers are recognizing the router wrt54g do i need to change the name of my network. the network went down while i was awy for a couple of days and never has come back up.

    061015 pointsBadges:
  • lan connectivity

    in my laptop network adopter show "network cable unplug" while cable is ok,lan card is ok,adopter is enable and no any group policy applied then whats the problem?

    Rajpandey130 pointsBadges:
  • Boost connectivity with Cat5

    I know this is nt right but in a picnh for now this is what was done. went about 270 feet in cat5 cable and terminated to a jack. Then to a little 10/100 switch then five 5 lines to more than 100 feet of more cat 5 to another terminated ends.   Well of course the speed on the network is slower but...

    Jaymz69765 pointsBadges:
  • ip address of laptop to connect with office vpn

    I was connected to a vpn but i switched to cable from dsl, now my laptop won't connect to the vpn

    Czarsala5 pointsBadges:
  • Mapping network drives on clients

    Ok, this is very basic, but I am new to networking. My understanding is that mapping network drives on clients in a particular domain is client dependent. In other words, if I map on my PC connection to drive X, and then later I log in on another PC in the same network, I would have to map the...

    mikidc470 pointsBadges:
  • Error 1606. Could not Access Network Location :.

    I can't install or uninstall a lot of software (most notorius java runtime) because of that message, I've been searching for solutions over the past few months and nothing solved this problem. Now I'm trying to reinstall steam and that error pops up, it doesn't mention appdata or anything, only :....

    Jmmontoro15 pointsBadges:
  • Repeated network switch failures

    This is now the third switch at a small business location that has failed. This is their only switch. The first two were Dell, and the last was NetGear. Each time power is fine, but no connectivity. Powering on and off does not help. It has been happening about every 2 months, and it always seems...

    ElizabethS5 pointsBadges:
  • APC device connected via USB shutting down other systems

    Can we have a APC device connected to a server via usb or serial cable alert other systems on the network and have them shut down?

    NewnanIT1,110 pointsBadges:
  • Active Directory network error: “Failed to Contact Domain Controller”

    Occasionally users can not log in to our 2008 Active Directory network. They get a failed to contact a domain controller. We have two AD boxes and when this happens no one can log on. It lasts a few minutes at most. How can we troubleshoot and resolve this issue?

    Troubleshooter24755 pointsBadges:
  • Random Request timed out when ping router?

    I just noticed my internet was unstable and slow. I connected my laptop directly with leased line modem, I can able to work & ping without request timeout But when I connected through router am facing this problem, Random Request timed out when ping with router I am suspecting the problem with...

    Softtools20 pointsBadges:
  • Booting generic machines to the network & installing image of Windows 7

    We purchased 200 generic machines without operating systems. We need them to boot to the network and install an image of Windows 7. What is the best way to do this? Can it be done with Windows services?

    TeachMeIT975 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following