• vsat connections using router

    How do i connect my two office via vsat using routers?

    Patilnet65 pointsBadges:
  • networking connecting 2 compueters

    i need to connect two computers which are 2km away to run the internal  sales software. The data is large and the band width required is 35 mb  .the speedm is important to rune the billing software.

    Avanjal35 pointsBadges:
  • Routing Between Two Networks

    1.I have two separe networks 192.168.1.0/24 with a Juniper Netscreen NS5GT and the second network is 192.168.5.0/24 with a Netgear WNB2100 Router ,they r physicall connected by CAT5 cable though the Internet port. I can ping from the 192.168.5.0/24 to 192.168.1.0/24, but i can't ping the other way....

    Datamatt15 pointsBadges:
  • Range extender

    Am trying to fit a range extender to a Neuf wifi router IN FRANCE. Would prefer to purchase it in the UK. Apparently, a N41GR SC Network Extender 300N has a Modulation Type 802.11g. Would this work in France?

    Hoppy5 pointsBadges:
  • Two Subnets – Three Routers + DSL Modem

    Is the following setup valid for creating two subnets (192.168.2.xxx and 192.168.3.xxx) that both access a single internet connection but are isolated? ROUTER A WAN --> DSL Modem ROUTER B WAN --> ROUTER A LAN  ROUTER C WAN --> ROUTER A LAN  Settings: Router A  WAN - PPoE, etc. etc. LAN...

    Hashlock5 pointsBadges:
  • Network topology: Linking 2 Offices

    Hello I want to link two office which are aprox 200 Meters apart. Their is a Main road betwenn the two buildings, so we can't even run any wire accross the two building. Whats will be the best, cheap and effective way to interlink 2 offices. What can be the max speed i can attain ? I dont want to...

    Softtech25 pointsBadges:
  • any one do planing about network

    ok i am tell you my plan i have 200 user in my network, three server already in used in my workgroup network(SQlaplication server,terminal server), all the user work on ERP SERVER and some user working on terminal server remote site . i,d want to implement AD on my network with the exchange server....

    Bbb845 pointsBadges:
  • Combining Networks with Same IP Scheme, VLAN,

    Hi, We are combining an couple offices next week & i need some advice. The networks already have VLANs set up. we have a Cisco 3550 Layer 3 switch set up to route traffic. The servers are on this site also. The network IP's are 10.1.1.x, 10.1.4.x & 10.1.5.x. Servers reside on all of those networks....

    Ramii5 pointsBadges:
  • accessing the internet

    i have 125 computers and want to run TCP/IP and access the internet. Im only assigned 4 public IP addresses and decide to assing the computers addresses in the range of 172.16.1.1/16 to 172.16.1.125/16. I would like to know wat else is suggested to allow thes computers to acces the internet?

    Emanuela1725 pointsBadges:
  • One of my computers keeps getting an IP Conflict message.

    One of my computers keeps getting an IP Conflict message. the way I have this machine hooked up goes as follow. network>>switch>>4 Workstaions

    Jsuarez145 pointsBadges:
  • main network topology

    Hi, I am designing a network to a medium company with around 50 workstations. company has 4 departments. this company is goin to open a branch office in a nearby country. the branch needs to access the inventory system in the main office. what my thought on designing this network is to have 4...

    Kekkaishi15 pointsBadges:
  • 2 dhcp server 1 dsl router

    Hello, how can I setup 2 dhcp server with switch each and 1 dsl router and both can get internet connections

    Rukiee5 pointsBadges:
  • Whathat is the best configuration of system for using ISA for about 60client systems

    Please some one give a best suggetion for the configuring ISA 2005 with server2003 OS. which we have 4Mbps internet,100Mbps switch,and 60 client systems.Its urgent

    Udaykirak15 pointsBadges:
  • Adding static route on Windows PC from different network segment between known routers

    Network looks something like this: PC (10.65.68.100) ---- Router (10.65.68.1/10.65.67.1) --- Router (10.65.67.67) --- Destination (10.0.1.100) I use something like this: route -p add 10.0.1.00 mask 255.255.255.0 10.65.67.67 My router knows the way to 10.65.67.67, as evidenced by my ability to ping...

    IrishLoop35 pointsBadges:
  • If my network’s configured incorrectly, how are my computers communicating?

    I have a question regarding communication within a local network. Please correct me If I am wrong: If there are two computers in a local network, Computer (A) and Computer(B), and if (A) wants to communicate with (B) or vice versa, then the request first strikes the router's LAN interface, right?...

    NetworkingATE1,545 pointsBadges:
  • Network configuration

    hi, i am the IT administrator in my office...it is a new organization and we're into service delivery of a software that can back all data on your phone. now, we dont have a network yet and our staff strength is 8 people which includes the CEO,Fin mgr,admin mgr,HOD IT and 3 customer service...

    Lexington5 pointsBadges:
  • Router configured one hop from PC with default gateway as IP address

    What would happen and what would be the flow if I configured a PC with the default gateway as an IP address of the router that is one hop away -- that means, I have one more router in between?

    NetworkingATE1,545 pointsBadges:
  • lost wireless network

    I had a wireless network set up, but lost internet conecntion to both my desktop and laptop. I hit the reset button on my westell box, and regained internet access on the desktop. However, my wireless network is no longer showing up as an availble network. (I can still see my neighbors, etc.) What...

    Whitman5 pointsBadges:
  • I need to add IP addresses

    I use a pair of HP Procurve 2824 and a pair of 2650 switches and I think I want them to pass all data through without filtering. I also need to make my Windows 2000 Server share a wider range of IP addresses, since I've depleted my entire supply. The Server is currently via DHCP is giving out...

    WCM10 pointsBadges:
  • configuring two adsl2+ line on cisco router1841

    I have cisco router 1841 with one adsl2+ connected to it, i need to connect another adsl2+ line to this router for the purpose of load balancing, i am using statiic ip routing, t Could you please let me know the complete configuration to attach new adsl2+ line to this router, As i am at beginner...

    Jaggum5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following