• one pc can’t access via windows server 2003 network

    in network all pcs are connected together, but one pc not show that shred data. all are in the domain.

    Jaynilesh5 pointsBadges:
  • Setting up a small network – I have a 16 port switch all computers are accessing the internet through.

    Setting up a small network - I have a 16 port switch all computers are accessing the internet through. Can I set up a network on this configuration as is?

    BroDo5 pointsBadges:
  • how to set up the computer in a small network area so that we can send message to one another if an extension line is busy

    Hi. I have done CCNA studies 1 & 2 for the last 2 years. I found doing Cisco very interesting and i really want to further my studies to where I am dreaming to become.i am working as an export officer in the company so with the love of doing networking i always try to do what i still remember from...

    1810855 pointsBadges:
  • How can I share my printer or create a network printer?

    How can i share my printer ?. or How can i creat a network printer ?

    Ermaldina35 pointsBadges:
  • Boost connectivity with Cat5

    I know this is nt right but in a picnh for now this is what was done. went about 270 feet in cat5 cable and terminated to a jack. Then to a little 10/100 switch then five 5 lines to more than 100 feet of more cat 5 to another terminated ends.   Well of course the speed on the network is slower but...

    Jaymz69765 pointsBadges:
  • how to network computers

    please i would like to know how i can network two computers,making one a domain controller

    Afreh865 pointsBadges:
  • Computer network subnetting

    I want to connect 125 computers in a network to the internet, I only have 4 public IP addresses. the computers are in the range of 172.16.1.1/16 through 172.16.1.125/16. What else do I need to allow these computers to access the internet?

    Melyndalea5 pointsBadges:
  • Netgeat Vlan help

    Hi, I have got a Dell L3 Switch (PC6224) 1x FSM750S 48port Managed switch 1x FS726T 26port smart switch 1x GS724TS 24port smart switch My aim is to create a number of Vlans, but I am not entirely sure if this will work with the hardware I have got. If anyone could tell me how to set trunk ports...

    Michi120 pointsBadges:
  • Do I need my small business server?

    I would like to eliminate my small business server as we are downsizing and only need to network 4 computers. Is it necessary to have the server? How would I join the four computers so that we are able to share a printer and documents?

    Sperry69215 pointsBadges:
  • Network Design – Share Internet In a Condo Building

    I am helping to setup a network in our condo building to share a new AT&T Fiber internet line. The condo building has 28 units, each with a single CAT5 to the building's communication closet. Objectives are to share the internet line but not allow the condos to see each other on the network....

    Patrija20 pointsBadges:
  • How to configure ISDN on Cisco Router 1700 Series through BSNL Line

    How to configure ISDN on Cisco Router 1700 Series through BSNL Line

    DSE5 pointsBadges:
  • Can I connect a Linksys Wireless-G USB Adapter and an HP Photosmart C6280 to my wireless network without plugging the printer into my router?

    Hi, I just bought a HP Photosmart C6280 and it has an Ethernet port. I also bought a Linksys Wireless-G USB Adapter. Is there a way I can connect the two to my wireless network without plugging the printer into my router? What I want is the printer in one room, the router in another, and my two...

    NetworkingATE1,545 pointsBadges:
  • WAN logical topology help

    what is the best logical topology for a WAN for a business with 4 branches (1 main and 3 remote sites). Each branches holds 70 computers. please help.

    Ifurnotheone15 pointsBadges:
  • Two routers and Two internet connections on one network

    Trying to setup a network, with my friends because we are going to be renting a house together, they will be sharing an internet connection, but I torrent alot so I figured I should pay or my own.  Wanted to maintain a lan b/c I made a system that allows them to add torrents they want me to...

    Anc3s25 pointsBadges:
  • Routing issue: I want to open SSH

    Hi, I would like to get help, I have 2 computers: computer A with 1 network card, IP 172.19.3.22 DG 172.19.3.254 computer B with 2 network cards, ETH0 IP 172.19.35.75 DG 172.19.35.254 ETH1 IP 10.0.0.2 DG 10.0.0.254 Between the computers I have cisco switch with 2 Vlans, Vlan 3 for computer A and...

    Tomoshik15 pointsBadges:
  • Advice on LAN and router network setup

    Hello, i am kind of a newbie concening network. I have a question maybe someone is willing to respond (sorry for my english) I have attached an image to illustrate the situation. This setup work but i'm not sure it is good: I have a modem in bridge mode and a wifi-router who handle the pppoe...

    Jeanbon5 pointsBadges:
  • cisco 878 and 3com how to get it working and getting access to IP camera via public IP

    I got Cisco 878 router with a 3com switch (unmanaged) the end devices Which are connected behind a 3com , are a network recorder and 3 IP camera's I see the arp and mac address, but I can't connect to them, or view the camera or able to access the recorder RTR-1# sh arp Protocol Address Age (min)...

    Pinkeltje19695 pointsBadges:
  • Cisco switches and Router for Small business

    Hi people. Im working on a network Project. Small business with less than 100 users. Anyone knows which Cisco products, with respect to cost, i can use for: 1 - access layer 2 - Distribution/ Core layer. on google or cisco.com i find either end-of-life or too expensive. Thnx for any help.

    Zaza25 pointsBadges:
  • how to use two gateway in single port

    [strong]I have a network with two routers with different IP addresses. One of the routers is for Internet access and the other makes a VPN connection to another location. [/strong] What should I do in order to allow a PC with Windows 2000/XP to access both locations (Internet and VPN) at the same...

    Manigandan5 pointsBadges:
  • connecting D-link wireless router with cisco 2500 router and 1900 switches network

    Hi, I want to connect a wireless network through D-link wireless router, currently using 1900 cisco switches and 2500 series router. Is this possible, plz advise. Thx!

    Jovipk10 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following