Wireless Router, Access Point and Switch
Hello All, I am having a problem setting up an Access Point. Here is my configuration. I have a Comcast Cable Modem that plugs in to a 24 port Netgear Switch. From the switch it plugs into the Linksys N wireless router with an IP of 10.1.10.76. I don’t know the linksys model. But it [...]

Answer Question   |  September 11, 2012  1:51 AM
Linksys Routers, Netgear switches

Netgear FSM726
Can FSM726 be used in none managed mode and used as a basic switch.

Answer Question   |  March 31, 2012  8:26 AM
Netgear, Netgear switches, Router and switch management

VLAN DHCP problem between Router and Switch
I have a Cisco SA520 Router connected to a Netgear FS726TP Switch. Router has 3 Vlans.  Management VLAN 1 /29  Hosts VLan 5 /27  VoIP Vlan 10 /27  Router Ports 1 and 2 are setup up identically, in Trunk Mode each port and all VLAN’s should be accessible through it.  Port 3 Vlan 5  Port [...]

Answer Question   |  March 31, 2012  7:16 PM
Cisco Catalyst 520, DHCP, Netgear switches, VLAN, VLAN configuration

switch to swtich connectivity
i have Netgear FSM726 and Netgear GS724TS fixed in different locations and connected with Fiber link port, the issue is both the switches are not communicating, i cant connect systems on both other side. can anybdy help

Answer Question   |  March 31, 2012  6:27 AM
Netgear switches, Network connectivity, Switch configuration

Web Hosting strategy – NAT’ing and ARR
I’m looking to develop a new strategy for our web hosting farm. Currently I’ve got  set of standalone IIS 6 web servers and sql 2005 database servers sitting in a network behind a kerio winroute proxy (which handles our nat’ing and intrusion prevention and VPN to our office location) which in turn sit behind a [...]

Answer Question   |  October 18, 2010  10:35 AM
IIS, IIS Server, Netgear switches, Network Address Translation, SQL 2005 Database, SQL Server 2005

telnet feature in Netgear Smart Switches
I have a handful of netgear FS726TP and FS728TP switches deployed in this organization. The FS728′s have a MAC address and IP table feature, but I cannot find the same functionality in the FS726s. I want to telnet into the device from CMD, but I am receiving the normal error: “Could not open connection to [...]

Answer Question   |  April 20, 2009  1:11 PM
MAC Address Table, Netgear FS726TP, Netgear Smart Switches, Netgear switches, Switches, Telnet

Dcpromo in Windows Server 2003
Hi, im currently setting up a Windows Server 2003 server, I only have problem with dcpromo. Basically after I set the IP address to be static and make the default gateway same as the server, and use DCPROMO, in the end the dns address isn’t the IP address of the computer, instead it’s Localhost, IP:127.0.0.1 [...]

Answer Question   |  April 18, 2011  11:35 PM
DCPROMO, DNS, IP addressing, Netgear switches, Windows Server 2003

How can i configure a port for multiple vlan at Netgear FS728TS (like “trunk port” at cisco switch)
i have an Netgear FS728TS switch and i have to use 2 vlan with an cisco switch. (i have no problem about cisco switch configuration) vlan name=Default vlan ID=1 vlan name=AP vlan ID=307 there is F/O cable connection between two switches. 1/g1 port using for this F/O connection at Netgear switch. in my configuration ; [...]

Answer Question   |  May 8, 2009  12:28 PM
Cisco switches, Netgear FS728TS, Netgear switches, Switches, VLAN configuration, VLAN hardware, VLAN Setup

Netgeat Vlan help
Hi, I have got a Dell L3 Switch (PC6224) 1x FSM750S 48port Managed switch 1x FS726T 26port smart switch 1x GS724TS 24port smart switch My aim is to create a number of Vlans, but I am not entirely sure if this will work with the hardware I have got. If anyone could tell me how [...]

Answer Question   |  December 1, 2010  1:22 PM
Cisco, Dell, Dell L3 switches, Dell PowerConnect 6224, FS726T 26port smart switch, FSM750S 48port Managed switch, GS724TS 24port smart switch, Netgear switches, Network Configuration, Networking, VLAN, VLAN hardware