• Why can’t I connect to the Internet through my new GBIC module?

    On the MDF Rack is a Linksys switch that has 24 ports with two mini gigabit interface converter (GBIC) modules: One GBIC module port states up to 12; the other port states up to 24. [o:p][/o:p] Also, there are two fiber patch panels with 12-pair wires connected to Ports 1-2 3-4 5-6 7-8 9-10 11-12...

    NetworkingATE1,545 pointsBadges:
  • Connect Linksys Router with Dell switch

    I am looking for a solution. I have a Linksys with ddwrt firmware. I also have a Dell powerconnect 3324 switch. I want to connect the CSU/DSU to the linksys so that I will have a firewall/dhcp/nat etc.. and then into the switch so that I can plug clients into it. Can anyone explain what I need? or...

    Joey30025 pointsBadges:
  • Linksys router issue

    We are a small organization using Linksys WRT54G wireless routers in a section of our offices. One router will not accept a change from WEP to WPA2. Attempts to update the firmware (in the hopes that this would resolve the issue) fail both from the external updater and from within the router...

    Pressler29042,190 pointsBadges:
  • Wireless Network With User Name And Password Login

    Hello I am looking to setup a wireless network. I want it to not have to use an authentication code but instead divert everyone who connects to it straight to a login page. I would setup a list of all user names and their passwords that I would want to be able to connect to the internet and accept...

    Greekgod18205 pointsBadges:
  • VPN over dynamic IP address

    I want to host my source code control environment (SVN) on a server at home, accessible through VPN. I have a dynamic IP address. Does anyone have suggestions for hardware (router/servers) and software. Looking to keep a low expense, but something that will get the job done well. I have a Linksys...

    ITKE352,580 pointsBadges:
  • Upgrade existing network for wired and wireless Internet access

    I have an existing network with 1 server and 10 workstation. the server IP address is 173.201.5.1 with subnetmask 255.255.0.0 and 10 workstation with the IP address ranging from 173.201.5.2 to 173.201.5.11 with subnet mask of 255.255.0.0 I want to upgrade my existing network with out changing its...

    Flade5 pointsBadges:
  • Connecting D-Link 1260 Print Server to Linksys wireless router

    I have a Linksys wireless router and it works fine - but I want to add my FP printer to my network. I bought a D-Link 1260 Print Server and connected the D-link 1260 Print Server to the printer USB port but I have very hard time connecting via Wi-Fi. Can anyone help me? I need to move the printer...

    NetworkingATE1,545 pointsBadges:
  • Home networking

    I have a home network which has 4 PCs and a couple of gaming platforms connected to it. I have a LinkSys 100 cable modem. I DID have two routers connected to it, one from the cable to the first router which fed directly to the main PC about 4 feet away. The other feed was to another router about 40...

    valmsmith870 pointsBadges:
  • Does the Cisco Linksys RVS4000 VPN support AES-256?

    Does the Cisco Linksys RVS4000 VPN support IPSEC with AES-256? I am trying to interconnect with a Checkpoint NGXR60.

    Copiousk15 pointsBadges:
  • My Linksys router has defaulted to unsecure

    My Linksys WRT45GS router has defaulted to unsecure and my wireless Network Name is gone. Does this just happen?

    CManintheD5 pointsBadges:
  • Can I use a Linksys print server as a bridge or access point?

    Can I use a Linksys print server as a bridge or access point?  I want to use it to connect a VoIP phone.

    4jbshere5 pointsBadges:
  • Connected with Limited Access

    My laptop sees and connects to the Linksys ea6500 router. During connecting, a message says access is limited and I can't open any webpage. Diagnostics say re-boot router. Did this 100 times and still doesn't work. Is this router or computer. How do I fix it?

    transistor10005 pointsBadges:
  • Linksys EA6500 help

    Hello, I have recently upgraded my old Linksys router, for a brand new Linksys EA6500 router. I have a fairly large home and many devices needing to be supported. I have the highest speed modem that my internet provider offers to be compatible with my new router. I would not consider myself to be...

    joebin5 pointsBadges:
  • Routing confusion

    I am confused about routing I know Cisco routers are capable of routing different NWs if it is WAN or LAN. Also there are lot of other routers available in the market such as d-link 525 .Netgear, Astaro, Pfsense,Linksys sub-routers. What is the difference between the routing mechanism they use?...

    sumeshbnr1,675 pointsBadges:
  • Network password

    I would like to know how to disable a network password that I have to type in every time. I'm the only one that uses this computer.

    tomyslady115 pointsBadges:
  • How do I reset the password on a Linksys E1000?

    Please help me reset my password.

    mcartlife10 pointsBadges:
  • Get password on linksys

    How to I get the password on Linksys now that I use an iPad 3?

    Computerisation5 pointsBadges:
  • Linksys WVC54GCA cannot connect up with 2Wire Router

    I was using my Linksys WVC54GCA wireless-G Internet Home Monitoring Camera, with my NetgearDG834PN ADSL Modem Wireless Router without any problem. When I upgrade my line to Singtel MIO Home, I was provided with a 2WIRE 2701HGV-E. Wireless connection for my PC/laptop have no problem. However, I am...

    Phlim35 pointsBadges:
  • DHCP vs PPPoE

    [!--StartFragment--] I recently replaced my 6-year-old D-Link wireless router with Linksys WRT54GL.  I am wirelessly connected with a Windows desktop, Apple laptop, and Brother laser printer.  While setting up the new Router I had difficulty in setting up as DHCP.  So I selected PPPoE and used...

    SbElectric2,540 pointsBadges:
  • Linksys Broadband firewall router

    How do I configure this router for a windows vista system?

    Amdrio345 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following