• SBS 2003 replacing port hub issue

    I recently replaced an 8 port hub with a 24 port hub on my sbs 2003 network. This connected fine to the server LAN but with no connectivity to the internet - all other workstations showed "Limited or no connectivity" - any ideas what I am doing wrong?

    ITKE351,965 pointsBadges:
  • A LAN shared printer issue

    I have facing a problem on my lan networking that is  when i connected a shared printer a message is apprear''The network path was not found." but when i restart my computer it connect that computer. and the other system r connected that computer. the same thing is happning when i connect with a...

    Aaina20045 pointsBadges:
  • pc shuts down on LAN, works fine without LAN

    If i use the pc without lan, it works fine no problem at all. But the moment i connect the pc on LAN, it shuts down. Using cross cable i can connect it to another desktop. But not possible to connect to LAN using straight cable. Tried changing port and cable but no use OS - win xp

    Don201010 pointsBadges:
  • Connection fine on internet, but slow (even timesout) on LAN

    I have PC1 directly connected to net and running few servers including web (apache). there are other 2 PC connected to this PC1 thgought switch. Problem is that when i try to open my webpage from any PC on LAN, webpage times out, also cannot connect to any games server. If it connects then after...

    Djbacon15 pointsBadges:
  • how i can message a user in lan through command prompt in windows Xp SP2 Os with out any third party software

    how i can message a user in lan through command prompt in windows Xp SP2 Os with out any third party software. Specially through dos commands

    ar348315 pointsBadges:
  • How do I use my 2 CISCO ASA 5520 with my CISCO 2800 Router over my LAN

    I'm working to get my CISCO ASA 5520 to connect to my CISCO 2800 Series Router and then to 8 CISCO 871 Routers for my DATA CENTER setup. Can I achieved this and how would you do same?

    Soldierlorry15 pointsBadges:
  • Internet connection sharing

    Hello friends, i am a new member of this site. i am using internet through LAN sharing (Windows XP). i have some project on GPRS Based. when i dial GPRS connection from my PC. it is disconnecting from INTERNET. its seems windows is taking the dial up connection as a default, coz it is on local...

    Manish20095 pointsBadges:
  • implementacion Lan con switch cisco 2950, capa 2

    ¿¿Que se necesita para hacer una lan con el switch cisco 2950 capa 2???

    Ald2030 pointsBadges:
  • lan drivers where I get RTL8029as ethernet pci drivers for windows2000.

    where I get RTL8029as ethernet pci drivers for windows2000.

    Bajith5 pointsBadges:
  • Network Connection Gone Windows Server 2003

    i used trogan remover scan and registry easy scan on my primary domain controller when i was restart my sever. my local area connection icon are missing and services are stopped like network connection,netlogon,dhcp,tcp/ip and other.how i correct this problem sorry i forget to add that when i try...

    Ajeet20 pointsBadges:
  • Domain creation

    we have a private LAN where all computers are on a work group,but now i want to make a domain in my LAN and also want to connect the computers to it,so what can i do to accomplish this please give me the steps breifly?

    IT Executive5 pointsBadges:
  • Envelope printer & document printer

    On a small LAN, I want to set a default envelope printer and a different default doc printer. Can this be done.

    Rwillet5 pointsBadges:
  • Limiting the upload

    I want to limit the upload or download from LAN to internet for specific IPs. please some one give me a method to do that, either limiting the size or the BandWidth.

    Qma15jo55 pointsBadges:
  • Networking

    What are the implementation of changing from LAN wired to LAN wireless in on office

    0 pointsBadges:
  • NAS gateways and antivirus support

    Would you request antivirus support on the Gateway or would you put an Antivirus Gateway between the NAS head and the LAN side?

    SearchStorageATE215 pointsBadges:
  • Bandwith for lan segment into wan serials

    I have two cisco 2800 routers, and need to assign diferent bandwith to diferent lans, that send data into these two equipments, what is the best form to config this?

    Gdavila5 pointsBadges:
  • Running sound over the LAN via Terminal Services

    in running terminal servers, has anyone run sound and or video via terminal services and how did it work out?

    Buddyfarr6,850 pointsBadges:
  • site-to-site problems.

    I've recently had a need to connect 2 networks, but both networks have the exact same IP scheme. We need one computer one on one side to connect to the server at the remote site, but that server has the same IP as the data base server from the computer's side. How will I be able to connect a...

    Madpawn220 pointsBadges:
  • connecting 2 networks

    I'm looking to connect 2 networks that have the same IP's and subnet (192.168.0.XXX/24). I'm not looking to completely merge these 2, but I'm looking to setup a VPN for about 2-3 computers to run on SITE A's network and have access to SITE B's Server. SITE A IP scheme is 192.168.0.XXX/24 and SITE...

    Madpawn220 pointsBadges:
  • Internal LAN domain on Speedtouch 716

    Hi Does anyone know how to alter the internal .lan suffix on my speedtouch router? Not only the device itself is reachable with speedtouch.lan but also all DHCP devices receive a .lan suffix. I want to set up an internal domain name. Any help much appreciated!

    Thevoyager4310 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following