• How do I adjust what IP address shows when an email is sent?

    I have a small network. We created a server on a local network. The server has a real IP {210.212.108.195} and rest of our clients have a local IP {192.168.1.25}. All of our clients are connected to the Web via a server. When a client sends an email, our real IP shows in the mail details...

    NetworkingATE1,545 pointsBadges:
  • Problem in IBM Server X3400 NIC

    Hi, Everybody i will configure ibm server x3400 there r 3 builtin NIC ports, but in the network connection properties there r only 1 NIC show, all drivers are successfully installed, no device driver problem, i am use NIC in LAN and ADSL Modem, how to configure two IP in there..... Please...........

    Shahzada20 pointsBadges:
  • How many Exchange servers should I use in my company?

    I'm attempting to set up an Exchange server for a company that currently receives email through POP mailboxes. Since the company has two websites, would you recommend two Exchange servers (one for each site)? Or would you suggest one Exchange server and simply have email passed over a LAN to a VPN?...

    Exchange Ask the Experts580 pointsBadges:
  • Combining Networks with Same IP Scheme, VLAN,

    Hi, We are combining an couple offices next week & i need some advice. The networks already have VLANs set up. we have a Cisco 3550 Layer 3 switch set up to route traffic. The servers are on this site also. The network IP's are 10.1.1.x, 10.1.4.x & 10.1.5.x. Servers reside on all of those networks....

    Ramii5 pointsBadges:
  • LAN acces restriction for laptops on Windows Server 2003 domain

    Is there any way on a Windows Server 2003 domain to prevent unknown laptops from accessing the local LAN without needing to use third party hardware and software?

    JimmyIT1,725 pointsBadges:
  • Windows XP Peer to Peer networked printer troubleshooting

    The HP 1505n network printer was installed as a Network printer was successfully completed. Run a test print but did not print. The document failed to print. I have a Windows Peer to Peer network linking 6 computers. The printer is installed on one local PC with the USB cable share the resources...

    Sdr5 pointsBadges:
  • How to configure wan/ lan in router 3700 series

    How can i configure WAN and LAN in IP addresses with Ip Addrese of provider is IP: 114.198.149.34                SM: 255.255..255.252                GW: 114.198.149.33                DNS1: 114.18.148.3                DNS2: 202.127.128.2 And...

    Tatol5 pointsBadges:
  • LAN encryption products

    I have a bank that wants to encrypt their LAN traffic. Before we find out which network apps/dbs/components they want to encrypt, I would like the names of several network encryption products to look at.

    LAPhil5 pointsBadges:
  • Strange IP address on my network

    Strange IP address on my network My LAN has been very slow of recent. And I found out that if I ping a system on network it drops packets intermittently. But instead of it showing request timed out, it is showing "Reply from 192.168.1.1: Destination Host Unreachable. Whereas this ip doesn't have...

    ITKE350,355 pointsBadges:
  • System i Console Solution for 8203-E4A (LAN or Operations Console)

    We are in the process of replacing our development system with a new 8203-E4A and I have no experience with any console other than a Twinax console. I read in the 520/550 Builder red book that there are several options that can be used. I don't see a need to use a HMC since we will not have a...

    hafwhit1,145 pointsBadges:
  • Network problems Cisco router config

    Hi experts, I want to connect with a web server in remote end using leased line connectivity through Cisco 2800 series router I have a flat network with 500 users in network. All PC’s default gateways are configured the IP of routers Ethernet. When I am ping the web server from LAN it is taking...

    Intrnetworking30 pointsBadges:
  • LAN Administrators and my IP address

    If my computer selects its IP automatically, will the LAN administrator know what my IP is? P.S. I'm in China....

    JBM200005 pointsBadges:
  • sql .net 2005 deployment

    I am trying to connect my desktop application to sql server on a lan  but the clients are being recognised as guest how do i enable ny appplication to run on the lan. I am using windows authentication.  

    Semauel8515 pointsBadges:
  • Microsoft deployment toolkit

    I have MDT server on my network and i have more than one VLANs.But i have failed to boot from the MDT server when am on the LAN on which the server was not configured.Can anyone help me tell me how i can cross MDT to all VLANs on the network?

    Mubs110 pointsBadges:
  • SBS 2003 replacing port hub issue

    I recently replaced an 8 port hub with a 24 port hub on my sbs 2003 network. This connected fine to the server LAN but with no connectivity to the internet - all other workstations showed "Limited or no connectivity" - any ideas what I am doing wrong?

    ITKE350,355 pointsBadges:
  • A LAN shared printer issue

    I have facing a problem on my lan networking that is  when i connected a shared printer a message is apprear''The network path was not found." but when i restart my computer it connect that computer. and the other system r connected that computer. the same thing is happning when i connect with a...

    Aaina20045 pointsBadges:
  • pc shuts down on LAN, works fine without LAN

    If i use the pc without lan, it works fine no problem at all. But the moment i connect the pc on LAN, it shuts down. Using cross cable i can connect it to another desktop. But not possible to connect to LAN using straight cable. Tried changing port and cable but no use OS - win xp

    Don201010 pointsBadges:
  • Connection fine on internet, but slow (even timesout) on LAN

    I have PC1 directly connected to net and running few servers including web (apache). there are other 2 PC connected to this PC1 thgought switch. Problem is that when i try to open my webpage from any PC on LAN, webpage times out, also cannot connect to any games server. If it connects then after...

    Djbacon15 pointsBadges:
  • how i can message a user in lan through command prompt in windows Xp SP2 Os with out any third party software

    how i can message a user in lan through command prompt in windows Xp SP2 Os with out any third party software. Specially through dos commands

    ar348315 pointsBadges:
  • How do I use my 2 CISCO ASA 5520 with my CISCO 2800 Router over my LAN

    I'm working to get my CISCO ASA 5520 to connect to my CISCO 2800 Series Router and then to 8 CISCO 871 Routers for my DATA CENTER setup. Can I achieved this and how would you do same?

    Soldierlorry15 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following