LAN

Combining Networks with Same IP Scheme, VLAN,

Hi, We are combining an couple offices next week & i need some advice. The networks already have VLANs set up. we have a Cisco 3550 Layer 3 switch set up to route traffic. The servers are on this site also. The network IP's are 10.1.1.x, 10.1.4.x & 10.1.5.x. Servers reside on all of those networks....

LAN acces restriction for laptops on Windows Server 2003 domain

Is there any way on a Windows Server 2003 domain to prevent unknown laptops from accessing the local LAN without needing to use third party hardware and software? Software/Hardware used: LAN, Windows Server 2003

Windows XP Peer to Peer networked printer troubleshooting

The HP 1505n network printer was installed as a Network printer was successfully completed. Run a test print but did not print. The document failed to print. I have a Windows Peer to Peer network linking 6 computers. The printer is installed on one local PC with the USB cable share the resources...

How to configure wan/ lan in router 3700 series

How can i configure WAN and LAN in IP addresses with Ip Addrese of provider is IP: 114.198.149.34                SM: 255.255..255.252                GW: 114.198.149.33                DNS1: 114.18.148.3                DNS2: 202.127.128.2 And...

LAN encryption products

I have a bank that wants to encrypt their LAN traffic. Before we find out which network apps/dbs/components they want to encrypt, I would like the names of several network encryption products to look at.

Bridge mode vs NAT or router mode

Could any one simply explain the differences between NAT mode Vs brdige mode? And can I configure the same IP range for WAN and LAN interface for a router whih con ein brdige mode? Is brdigne mode really requires IPs?   Thanks,   Software/Hardware used: router NAT brdige

Strange IP address on my network

Strange IP address on my network My LAN has been very slow of recent. And I found out that if I ping a system on network it drops packets intermittently. But instead of it showing request timed out, it is showing "Reply from 192.168.1.1: Destination Host Unreachable. Whereas this ip doesn't have...

sql .net 2005 deployment

I am trying to connect my desktop application to sql server on a lan  but the clients are being recognised as guest how do i enable ny appplication to run on the lan. I am using windows authentication.   Software/Hardware used: vb.net, sql server 2005,P4 compters

Microsoft deployment toolkit

I have MDT server on my network and i have more than one VLANs.But i have failed to boot from the MDT server when am on the LAN on which the server was not configured.Can anyone help me tell me how i can cross MDT to all VLANs on the network? Software/Hardware used: microsoft deployment toolkit...

LAN Administrators and my IP address

If my computer selects its IP automatically, will the LAN administrator know what my IP is? P.S. I'm in China....

Remote control a computer over internet behind Cisco & Broadband router

My wan/lan scenario is graphically presented in this snap (http://www.picscrazy.com/view/dxxu )  So far using static IP I’m able to telnet (over internet) my cisco 2611 router which is behind NAT supported broadband router but what should I do to connect remotely using Realvnc or similar tool...

Exchange 2007 certificates and Outlook web access

When i set up Exchange 2007 Enterprise edition i also deployed an edge server. i opened for web access so that users could log on to webmail. They all received that self signed certificate error  so i purchased a certificate through Thawte. This was "locked" to the name "webmail.domain.com". The...

SBS 2003 replacing port hub issue

I recently replaced an 8 port hub with a 24 port hub on my sbs 2003 network. This connected fine to the server LAN but with no connectivity to the internet - all other workstations showed "Limited or no connectivity" - any ideas what I am doing wrong? Software/Hardware used: SBS 2003, LAN

A LAN shared printer issue

I have facing a problem on my lan networking that is  when i connected a shared printer a message is apprear''The network path was not found." but when i restart my computer it connect that computer. and the other system r connected that computer. the same thing is happning when i connect with a...

Connection fine on internet, but slow (even timesout) on LAN

I have PC1 directly connected to net and running few servers including web (apache). there are other 2 PC connected to this PC1 thgought switch. Problem is that when i try to open my webpage from any PC on LAN, webpage times out, also cannot connect to any games server. If it connects then after...

pc shuts down on LAN, works fine without LAN

If i use the pc without lan, it works fine no problem at all. But the moment i connect the pc on LAN, it shuts down. Using cross cable i can connect it to another desktop. But not possible to connect to LAN using straight cable. Tried changing port and cable but no use OS - win xp ...

client/server architecture

Does a network type (LAN or WAN) impose limitation on technical development of a Client/Server architecture?

How can I find all the mac address on a LAN?

What is the best way to find the mac address of all the computers on a LAN? And if possible can I have the code in vb.net?

System i Console Solution for 8203-E4A (LAN or Operations Console)

We are in the process of replacing our development system with a new 8203-E4A and I have no experience with any console other than a Twinax console. I read in the 520/550 Builder red book that there are several options that can be used. I don't see a need to use a HMC since we will not have a...

Internet connection disconnects

My Internet connection disconnects. I checked my LAN settings in Network Settings , it shows status "Connected". But if i try connecting any website it shows The page cannot be displayed....... To attempt fixing network connectivity problems, click Tools, and then click "Diagnose Connection...