• How can a factor 2 on a CALL be changed?

    I have the following code: C CALL 'UTWIPT' C PARM P0Part P1PART 20 C PARM P0Seq# P1SEQ# 3 0 C PARM P0Lot# P1LOT# 15 Before it excutes the value of P0SEQ# is 035... after the call I am getting different value... that is later causing a data dec error (such as hex F0F1). I didn't think a call could...

    JamesR90 pointsBadges:
  • Power Signaling

    I have a single rack with 2 i5's, each of which has dual power supplies. I also have 2 Powerware UPS's in this rack. Each UPS is on a dedicated circuit. The i5 power supplies are split between the UPS's. The issue is that there is only 1 signal cable per UPS, so if there is a power issue on only 1...

    wpoulin2,480 pointsBadges:
  • Where to store email addresses

    We are looking for a place/table to store email addresses, they need to be associated with i5 User Profiles. They are going to be used in a Java Application. The SMTP System Alias Table seems to be an appropriate place, but I have been unable to determine where this info is stored. Does anyone know...

    wpoulin2,480 pointsBadges:
  • import the data from iseries to excel sheet

    i read some instruction of Thierry Schmitz using timestamp. i am very much interested on this. please provide me any example of this. i am posting the process also. I prefer the following solution, working on request from the user : 1) the main excel sheet shows Timestamp of both Available DB from...

    Mup12345 pointsBadges:
  • secure ftp on Iseries/as400

    what is the difference in terms of command to use between using standard ftp and secure ftp on the iseries/as400 v5r3 ? pls send some sample code. thanks a lot in advance

    Chc22515 pointsBadges:
  • Over and under Hex display/edit

    Hi, I'm busy with a utility program on the i-Series (written in OPM RPG - which is still the standard where I am) and I need to be able to show some fields in hex mode for editing, like the DSPPFM command when you press F10 and F11. So I'm looking to display the hex values "over and under", with...

    Gilly40023,730 pointsBadges:
  • How can i see the source code for COMMAND created in iseries system.

    I want to know how i can see the source code for the command created in system

    Harish.kuolkhere190 pointsBadges:
  • Is it possible to print bar codes on an IBM4247 model V03 NOT using *ipds

    We can print bar codes OK when using *IPDS. The printer is also connected through a Lexmark box alhtough the printer also has a lan card built into it and this can be used if necessary. Many Thanks

    Joemcinerney15 pointsBadges:
  • Using APIs for editing MQ messages

    Hi, I'm trying to write an application to allow editing of MQ messages. I use the MQ APIs to read the messages from the MQ and I show these messages in a subfile using RPG. I want to be able to delete specific messages from the MQ - what's the best way of doing this? Can I use the API to just...

    Gilly40023,730 pointsBadges:
  • Spyview Queston

    Hi, We are considering moving from Gauss Spyview to IBM Content Mgr On Demand. One of the first things we would need to do is to figure out how to get our documents with the indexes out of Spyview. I guess on order to do this, we would need to know what DB files contain the indexes and how they are...

    Prairie Dog15 pointsBadges:
  • Using Adopt Authority on a menu system that transfers to another job

    I have a system with an old menu system that transfers the interactive job to another job. When you look at WRKACTJOB and see a + next to the interactive job, there are other jobs below this from the menu system. Does Adopt authority above the menu system follow down to the transferred jobs and if...

    Lovemyi2,310 pointsBadges:
  • Problem using Print Screen in Iseries Client Access 5.3

    User only gets blank pages when using print screen. She has chosen her printer and selected the correct pdt but nothing seems to help. Others can print screen to her printer with no problem. I have never had this happen in the 15 years I have used Client Access. Any idea what the problem may be?

    Ncp13465 pointsBadges:
  • Housekeeping Stream Files

    I am working on a utility program to housekeep stream files based upon how many days ago the file was created. I checked the DSPLNK command, but, this command does not provide the creation date. Does anyone haappen to know if there is such a command that would provide this information, and...

    Piano510 pointsBadges:
  • DLTEXPSPLF

    How do I create cmd DLTEXPSPLF with EXPDATE and DAYS parameters? Do I use it OUTQ level or print file level etc.?

    Willowd5 pointsBadges:
  • iSereis spool files with same names to IFS in PDF format

    I need to be able to know how to take serveral iSeries spool files and move them to IFS in a PDF format then have the files copied to CD. These are BRMS reports from different systems that are all sent to one particular system within a special outq so they all have same names. I can get one file of...

    Tpinky4,165 pointsBadges:
  • Is there a changed objects calculation on the AS400

    How do you get a total size of how many objects have been changed in a day?

    Bmorebad5 pointsBadges:
  • enable and Disable networkcard in as400

    Hi, my name is Gabreil and I want to know how can I disable and enable the networkcard from my as400 V5R3 because someday may light from the company go down but I have and UPS and my iseries as400 server still up, but the network card I hope that the netwokcard are autobloqued, because the IP are...

    Ggat25 pointsBadges:
  • Email for iSeries

    Hi, we send email from iSeries and it is working fine. We have two iSeries, one for development, one for production. But one Lotus notes server. When we send email from iSeries development, we do not want to sent email to real customer but we want to keep the ability to send email to our Lotus...

    Sonia15 pointsBadges:
  • Calling API

    Hi all, Does anyone knows how to call API program in interactive mode? How are the rules to call API? Let say I want to put CALL QEZSNDMG in WRKJOBSCDE, what do I have to put in the command, cause when I try CALL QEZSNDMG parm(''N' 'Y' ' ' 'Testing' 'User1'') its not working. It says that error...

    TG50 pointsBadges:
  • Trouble with pf transfer to excel

    I want to transfer an externally defined data file from the as400 directly into an excel file format, then send the file via email. I have email already set up. My problem is getting the file translated correctly for excel. I do not have client access. I have used cpytopcd for spool files, but...

    zbbwoc95 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following