• Has anyone connected HP Laserjet 2035n to iSeries via TCP/IP?

    Dozens of HP Laserjet printer are attached to our iSeries via TCP/IP. A few days ago we attached a new HP Laserjet 2035n using the same technique we've used many times in the past. It is giving us fits. After printine the first print job it hangs up for approximately five minutes, then prints some...

    WoodEngineer6,055 pointsBadges:
  • AS400 Compaitible HP printers

    We are looking at purchasing a HP Office pro 8500. HP says it is compatible with our Iseries (525) and yet it is not listed on IBM's list of printers(??) Is anyone using this printer with the Iseries?

    Rmason335 pointsBadges:
  • iSeries Printer session issue on Vista

    On my new Vista workstation, I have a configured an I series(V5R3) printer session for my HP CP1200 series printer. I can send spool files to the printer, but it comes out with small fonts. I have tried changing fonts but it always prints in the same fonts. I had this problem on XP, but i was able...

    Svocal120 pointsBadges:
  • Attaching HP Officejet Pro K5400 to iSeries

    Has anyone attached an HP Officejet Pro K5400 to the i Series using Ethernet? If so, what model number is in your configuration on the i Series. Our printer will print about five pages from the i Series then refuses to print again until the power is cycled.

    WoodEngineer6,055 pointsBadges:
  • iSeries and PDF

    Hi Guys, I know there has been some discussion going on with PDF printing. We use CreatePrint for our printing solution off the iseries. But would like to investigate if its possible to merge spool file (invoice) with a PDF form (if there is such a thing) and print, possibily via IFS. Basically...

    tjgm88980 pointsBadges:
  • How to remove printed spooled file from output que list

    We had several files that printed remain in either 'PND', 'WTR', or 'PRT' status. I ended the writer and was able to delete the ones in PND and WTR status. The file with PRT status remains. It does not affect printing other files. Tried vary off/on, stop/start writer, cleared printer buffer, turned...

    Kamari25 pointsBadges:
  • CRTDEVPRT – problem creating print device on iSeries

    I have created print device on my iSeries (CRTDEVPRT). Have successfully done this on many occasions on the same box and as recently as 6/9/09. When I using the same parameters using 10.7.xxx.xx IP address the report goes to PND status and does not print. Any other IP address and the configuration...

    BrentSheets6,875 pointsBadges:
  • Control of Spool Files Actions

    Is it possible to change the options available on the CHGSPLFA command. I would like to have more restrictions on what a user can do with a spooled file after printing it. Currently they can SAVE the file after printing and this includes invoice files, dispatch notes etc. which could possibly be...

    Tomotsk75 pointsBadges:
  • iSeries print usage

    All of our network printing goes to a Novell print server, and we use a piece of Novell software called iPrint to track that usage. We need to track the iSeries printing that is done on network printers in the same way. We're not even sure that it's possible, but we're not ready to take no for an...

    Bruce Regis20 pointsBadges:
  • Printer Output via iSeries Navigator

    how can I know who use printer output via iSeries Nvigator. or can I play with wrkreginf.

    Maltaf65 pointsBadges:
  • iSeries Access printing with Lexmark 2381 printer

    Hi We have a client using IBM Power 6 Server with Os/400 V5R4 using Iseries Acces version 6 to control a Lexmark 2381 printer contected to a P.C. The problem we are having is we are trying to print an 8 1/2 " form (51 lines) and the first form prints fine (Continuese forms) but at the end of the...

    Semd041970 pointsBadges:
  • Imagistics 3512 DEVD iSeries Printer problem CPF3397

    Hi I'm having trouble with a few Imagistics 3512 printers connected to a I series via IP The printers are in the US and the I series is in the UK They print correctly but are plagued with the printer ending abormaly. These then have to be restarted over and over again!! Does any body have a working...

    Mell0rman270 pointsBadges:
  • Print Server & iSeries

    Currently our printers are identified by IP Address over our network. There is discussion about using a Print Server for our Windows Clients. Will this have an effect on how I configure printers within the iSeries environment. Thanks, Bill

    wpoulin2,480 pointsBadges:
  • Using Access Codes with iSeries

    We are using Access Codes to keep track of our color printing, but when we have that feature activated we cannot print from the AS400. Has anyone been able to print to AS400 and keep the Access Code feature activated?

    Rhurley465 pointsBadges:
  • Print Server & iSeries

    Is anyone out there using a Print Server to handle their network printers and has this changed how you configure your networked printers on the iSeries ? Thanks, Bill

    wpoulin2,480 pointsBadges:
  • print pdf on i5

    hi @all, i create a pdf with php(fpdf-class) on my i5. The pdf-file is stored in the ifs. the file includes pics and it is nice formated. Now i want to print the pdf-file on my i5. How can i do that ? bye jo

    Jogisarge30 pointsBadges:
  • Print a Barcode on a Microline 421 Printer (a dot matrix)

    I have a client that uses 10 Mircroline 421 printers (a dot matrix) for purchase order, invoice, pick ticket, etc. They would like to print a barcode on them. The printer does have the capability to print barcodes. The printer is set to IBM emulation. I would like to use the barcode keyword in DDS...

    maggiebr30 pointsBadges:
  • Character set and code page values for printing from iSeries

    I want to print my PRTF (*AFPDS) in Times New Roman font (size 10 or 12). I think I can do this by giving FNTCHRSET values while compiling my PRTF. I'm not able to find what values can be given for character set and code page for Times New Roman. Please suggest.

    AS400 - Ask the Expert485 pointsBadges:
  • Reverse type printing from iSeries

    I am trying to print some reverse image (white text on black background) lines from an iSeries on a document. I am using FNTCHRSET(QFNTCPL/CODOGR10 QFNTCPL/T1V10037) at field level in the DDS. I am using DEVTYPE(*AFPDS) for the print file - the printers (IBM InfoPrint32 and HP1100) are configured...

    AS400 - Ask the Expert485 pointsBadges:
  • Printing a report at 12 CPI using font 85

    We have a report that should be printing at 12 CPI with a font of 85. The printer is a IBM 1552 laser infoprint printer. It looks to be ignoring the 12 CPI but if I change it to 15 CPI it does recognize that and prints accordingly. Does anyone know what we are possibly doing wrong. The CPI and Font...

    AS400PCFileTransfer16115 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following