• AS400 Printing Trouble

    Hello. My company upgraded our AS400 from v5r4m0 to v6r1m0 about a year ago. Ever since we've had issues with printers going into *END status randomly. The printers are two IBM InfoPrint 6400's. We never had this issue on our old AS400. During the day when we see it happen we just WRKWTR and use...

    Lemonjello100 pointsBadges:
  • iSeries/pc printer trouble

    Hi all, I recently replaced pc printers with some HP Officejet Pro 8500A. The printers are connected to the pc's via the USB cable.   The pc's are running Windows XP. When we do a local print screen in iSeries Access For Windows (v5.9), it can take up to 5 minutes for the printout to complete....

    Geojf385 pointsBadges:
  • AS400 HP printer set up

    How do you specify what tray the AS400 should pull from?

    Kroland5 pointsBadges:
  • PM400 screen to print

    PM400 option Print performance report displays the screen (below) to allow the user to drill down.  This screen is a summary with interval of 15 minutes for a 24 hour period.  I would like to copy the data lines (all entries for 24 hour period) data down to an Excel file (or .csv).  ...

    infiniumpro325 pointsBadges:
  • iSeries Print Spool File 3 Up

    We were printing 3x8 notices (continuous forms) on IBM 6262 printer. After upgrading to laser HP printers, the 3x8 notices print one to a page. The software vendor has offered no help citing that a program change was not warranted. How can I make these print 3 UP. I have tried changing the spool...

    435015 pointsBadges:
  • Configuration of HP P4515tn on Iseries 525

    How do I set up a HP P4515tn on Iseries 525 as a network printer allowing AFP fonts and MICR lines to print correctly from Payroll check application?

    SFairchild15 pointsBadges:
  • System i printing on Nashuatec MP/C5000 with equitrac

    Does anyone have any experience of this?  Specifically passing the System i owner of the spool file to equitrac software for secure printing?

    Jetty110 pointsBadges:
  • Character or line length when printing AS/400 spool file

    I wish to create a spool file on and AS400 Iseries and send that file to a pdf printer without it compressing the print to force the original 132 character line to fit on an 80 column paper. The report has overprinting and is only 80 characters per line.

    Littlebrother5 pointsBadges:
  • Sending iSeries spool files to a network printer

    I have a problem whereby my network printer is printing multiple copies of a spool file I have sent to it - it just keeps churning them out. The printer in question is an OCE' re-branded multi-function printer. I believe it's a VL2822C VarioPrint machine. Has anyone used these to print from an...

    Bristoldoug45 pointsBadges:
  • Bold printing with an HP P1006

    I have an HP P1006 that will not print bold when emulating from BosaNova. All of the other HP printers here emulate an HP LJ 4 and print perfect. If I attempt to emulate this printer as an HP LJ 4 nothing prints at all. I get the same results when trying HP III, or HP II. In summary. I either get a...

    DLM2007280 pointsBadges:
  • Problem with iSeries printer output

    Hi All, We have installed Iseries Access for Windows V6R1M0. But when we go to printer Output, it's very slow when we click any file, very slow, it's seem suspend. Please tell me how to slove that.

    QMP5 pointsBadges:
  • OUTQ name from IP address

    HI, Can anybody let me know if there is a way to find out the outq(printer) name from the ip address? i have a lot of printers attacthed to my as400 and i would like to know the name of the one for which i have the ip addrress without looking at each one. thanks

    Rockleadme385 pointsBadges:
  • CPA405E – on a Sharp photocopier

    I have a colour photocopier configured on my iseries as a writer (LAN SNMP HPCOLORLJ). The users have a error on the machine, which they can by-pass on windows, but the iseries just allows C or R as possible answers Message ID . . . . . . :   CPA405E       Severity . . . . . . . :  ...

    KasMcc230 pointsBadges:
  • HP5si printer error — cycling from PND to RDY

    My setup of an HP5si printer continues to fail - actually goes to a PND status, then the writer ends and the file staus changes to RDY. The device description is below. I have tried many setting changes but to no avail. The printer works great from Windows and I can ping it and it 'looks' like it...

    AS400 - Ask the Expert485 pointsBadges:
  • ISeries Report printing to network printer – font too small

    We have an AS400 print file which is defined with: 10 CPI, 6 Lines per Inch, Width of 132, Length 66, Font Idetifier is *CPI. We were using an AS400 print emulation session to print the report but want to get rid of this and use a device/outq on the as400. The report prints to a networked HP4050...

    Lehanb30 pointsBadges:
  • Iseries 5.4 HP Printing.

    We have been replacing our HP printers throughout the organization. I have updated the new IP address within the wrkdevd and updated the driber info. Now when the user prints from the AS/400 it will print portrait instead of landscaped....where should I be looking....this is driving me nuts! THanks

    Rmason335 pointsBadges:
  • Iseries print position problem

    I am having difficulty positioning output in the same position on a page across different printers using line/column positioning in DDS. If I use the position keyword in the same document across these printers then the output is positioned on the page in exactly the same spot each time. I want to...

    Jannene5 pointsBadges:
  • How to create iSeries printer file width greater than 378 limit?

    Is it possible to create an iSeries spooled printer file with a width greater than the 378 character limit on the CRTPRTF command? Possibly using an AFP function? The spooled file is intended to be imported into the COMPLEO utility for conversion to EXCEL. There is no need to print the spooled...

    Shuete25 pointsBadges:
  • USB printing and the iSeries

    We have some remote wrkstns using client access for the emulation and printing. The printer is attached as a USB printer. When client sends spooled files to this printer, it puts the splf on hold, once released it does print. If this same spooled file is sent to a printer on the LAN, the spooled...

    Jackees5 pointsBadges:
  • The way to print spool with bar code in iSeries to normal Laser Printer

    How to print bar code from iSeries spool (printer file with BARCODE and parameters specified) into normal Laser printer?

    CLCL25 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following