ISeries Printing Questions and Answers

Recent IT Questions

1 - 20 of 31
<<PREVIOUS 1|2 NEXT>>

USB printing and the iSeries

We have some remote wrkstns using client access for the emulation and printing. The printer is attached as a USB printer. When client sends spooled files to this printer, it puts the splf on hold, once released it does print. If this same spooled file is sent to a printer on the LAN, the spooled...

View Answer   |  Oct 6 2009  7:50 PM GMT
iSeries printing, USB ports
asked by Jackees

  5 pts.

AS400 HP printer set up

How do you specify what tray the AS400 should pull from?

View Answer   |  Oct 5 2009  6:17 PM GMT
AS/400 printing, iSeries printing
asked by Kroland

  5 pts.

The way to print spool with bar code in iSeries to normal Laser Printer

How to print bar code from iSeries spool (printer file with BARCODE and parameters specified) into normal Laser printer?

asked by CLCL

  25 pts.

Has anyone connected HP Laserjet 2035n to iSeries via TCP/IP?

Dozens of HP Laserjet printer are attached to our iSeries via TCP/IP. A few days ago we attached a new HP Laserjet 2035n using the same technique we've used many times in the past. It is giving us fits. After printine the first print job it hangs up for approximately five minutes, then prints some...

View Answer   |  Sep 4 2009  4:29 PM GMT
Printing, iSeries printing, TCP/IP
asked by WoodEngineer

  2190 pts.

AS400 Compaitible HP printers

We are looking at purchasing a HP Office pro 8500. HP says it is compatible with our Iseries (525) and yet it is not listed on IBM's list of printers(??) Is anyone using this printer with the Iseries? Software/Hardware used: Iseries 525

View Answer   |  Aug 25 2009  3:01 PM GMT
AS/400, iSeries printing, AS/400 printing
asked by Rmason

  335 pts.

iSeries Printer session issue on Vista

On my new Vista workstation, I have a configured an I series(V5R3) printer session for my HP CP1200 series printer. I can send spool files to the printer, but it comes out with small fonts. I have tried changing fonts but it always prints in the same fonts. I had this problem on XP, but i was able...

View Answer   |  Aug 18 2009  7:04 PM GMT
Vista, AS/400 printing, AS/400 printers
asked by Svocal

  65 pts.

ISeries Report printing to network printer - font too small

We have an AS400 print file which is defined with: 10 CPI, 6 Lines per Inch, Width of 132, Length 66, Font Idetifier is *CPI. We were using an AS400 print emulation session to print the report but want to get rid of this and use a device/outq on the as400. The report prints to a networked HP4050...

View Answer   |  Jun 29 2009  2:31 PM GMT
AS/400 printing, Remote OUTQ, iSeries printing
asked by Lehanb

  20 pts.

How to create iSeries printer file width greater than 378 limit?

Is it possible to create an iSeries spooled printer file with a width greater than the 378 character limit on the CRTPRTF command? Possibly using an AFP function? The spooled file is intended to be imported into the COMPLEO utility for conversion to EXCEL. There is no need to print the spooled...

View Answer   |  Jun 26 2009  8:47 PM GMT
iSeries, CRTPRTF, Symtrax Compleo
asked by Shuete

  25 pts.

How to remove printed spooled file from output que list

We had several files that printed remain in either 'PND', 'WTR', or 'PRT' status. I ended the writer and was able to delete the ones in PND and WTR status. The file with PRT status remains. It does not affect printing other files. Tried vary off/on, stop/start writer, cleared printer buffer,...

View Answer   |  Jun 23 2009  9:21 PM GMT
AS/400, AS/400 printing, iSeries
asked by Kamari

  25 pts.

iSeries and PDF

Hi Guys, I know there has been some discussion going on with PDF printing. We use CreatePrint for our printing solution off the iseries. But would like to investigate if its possible to merge spool file (invoice) with a PDF form (if there is such a thing) and print, possibily via IFS. Basically...

View Answer   |  Jun 18 2009  10:23 PM GMT
iSeries printing, iSeries PDF, Spool files
asked by Tjgm88

  440 pts.

CRTDEVPRT - problem creating print device on iSeries

I have created print device on my iSeries (CRTDEVPRT). Have successfully done this on many occasions on the same box and as recently as 6/9/09. When I using the same parameters using 10.7.xxx.xx IP address the report goes to PND status and does not print. Any other IP address and the...

View Answer   |  Jun 15 2009  6:09 PM GMT
CRTDEVPRT, iSeries printing, iSeries
asked by BrentSheets

  6535 pts.

Control of Spool Files Actions

Is it possible to change the options available on the CHGSPLFA command. I would like to have more restrictions on what a user can do with a spooled file after printing it. Currently they can SAVE the file after printing and this includes invoice files, dispatch notes etc. which could possibly be...

View Answer   |  May 27 2009  9:19 AM GMT
Spool files, CHGSPLFA, Change Spooled File Attributes
asked by Tomotsk

  45 pts.

Attaching HP Officejet Pro K5400 to iSeries

Has anyone attached an HP Officejet Pro K5400 to the i Series using Ethernet? If so, what model number is in your configuration on the i Series. Our printer will print about five pages from the i Series then refuses to print again until the power is cycled.

View Answer   |  May 26 2009  10:08 PM GMT
iSeries printing, HP Officejet Pro K5400
asked by WoodEngineer

  2190 pts.

Printer Output via iSeries Navigator

how can I know who use printer output via iSeries Nvigator. or can I play with wrkreginf.

asked by Maltaf

  45 pts.

iSeries Access printing with Lexmark 2381 printer

Hi We have a client using IBM Power 6 Server with Os/400 V5R4 using Iseries Acces version 6 to control a Lexmark 2381 printer contected to a P.C. The problem we are having is we are trying to print an 8 1/2 " form (51 lines) and the first form prints fine (Continuese forms) but at the end of the...

View Answer   |  Mar 4 2009  6:23 AM GMT
iSeries Access, Lexmark drivers, IBM POWER6 server
asked by Semd0419

  45 pts.

Imagistics 3512 DEVD iSeries Printer problem CPF3397

Hi I'm having trouble with a few Imagistics 3512 printers connected to a I series via IP The printers are in the US and the I series is in the UK They print correctly but are plagued with the printer ending abormaly. These then have to be restarted over and over again!! Does any body have a...

View Answer   |  Feb 19 2009  11:12 AM GMT
iSeries printing, Imagistics IM 3512, Pitney Bowes
asked by Mell0rman

  255 pts.

iSeries print usage

All of our network printing goes to a Novell print server, and we use a piece of Novell software called iPrint to track that usage. We need to track the iSeries printing that is done on network printers in the same way. We're not even sure that it's possible, but we're not ready to take no for...

View Answer   |  Jan 22 2009  3:45 PM GMT
AS/400 printing, iSeries printing, Network printing
asked by Bruce Regis

  20 pts.

Using Access Codes with iSeries

We are using Access Codes to keep track of our color printing, but when we have that feature activated we cannot print from the AS400. Has anyone been able to print to AS400 and keep the Access Code feature activated?

Answer Question   |  Oct 29 2008  10:22 PM GMT
iSeries, Printing, iSeries printing
asked by Rhurley46

  5 pts.

iSeries AFPDS printing to an IP printer is not supporting images to IP printer.

I am attempting to eliminate several pre-printed forms by using AFPDS, however I am running into a problem printing images. I first encountered the problem in trying to shade boxes. After research revealed that box shading is actually an image, I tried adding our company logo, confirming that I am...

View Answer   |  Oct 9 2008  5:41 PM GMT
iSeries, RPGLE, TCP/IP
asked by Len

  5 pts.

OUTQ name from IP address

HI, Can anybody let me know if there is a way to find out the outq(printer) name from the ip address? i have a lot of printers attacthed to my as400 and i would like to know the name of the one for which i have the ip addrress without looking at each one. thanks

View Answer   |  Oct 2 2008  4:01 AM GMT
AS/400, iSeries, iSeries printing
asked by Rockleadme

  385 pts.

1 - 20 of 31
<<PREVIOUS 1|2 NEXT>>