• How can I execute a batch job on a network server from an AS/400 FTP session

    How can I execute a batch job on a network server from an AS/400 FTP session?

    Roncadet25 pointsBadges:
  • Determine TCP port used by a connection.

    We have an application that has our iSeries (AS/400) connect to a remote IP address and port. If we have to end the application and restart it (IPL, error, end/start subsystem) the iSeries keeps the connection open. After the application is restarted, the TCP connections show two connections to the...

    LHrabar95 pointsBadges:
  • Dumb Terminal on iOS V6R1

    Hi, Is it true that dumb terminal connection on V6R1 iOS removed? We planning to upgrade to V6R1 and we have existing Dumb terminals connected on our current machine OS V5R3. What should we consider before and during the upgrade? Thank you.

    iNewbie215 pointsBadges:
  • FTP to Get File from UNIX to AS/400

    I should retrieve a file from UNIX to AS/400 (V5R3) to a data base file using FTP. But the File name on UNIX is RCVWFB01(SNDCHS01)20120203_092924.cnt. Now If I try to use GET command on AS/400, as GET RCVWFB01(SNDCHS01)20120203_092924.cnt LIBRARY/FILE.MEMBER, It throws me an error saying Invalid...

    sim400305 pointsBadges:
  • iSeries credit card approval interface

    We currently send/receive credit approvals via an ICF file and SDLC line sent through a router. We must change this and our merchant services provider gave us software that runs on a PC and will monitor a port for data from the iSeries. How do I send the data to the port? Can I still use the ICF...

    mguehl15 pointsBadges:
  • How secure is the Electronic Service Agent

    Since data is confidential on every iSeries, how would we know if the data sent to IBM is only about error and performance logs and no data is being sent to IBM servers? What profile is used to send this logs and does it have authority over data/user libraries? Thank you

    Jedlasquite360 pointsBadges:
  • What is QRWTSRVR and QCNDDMF

    What is QRWTSRVR and QCNDDMF for? Is there a default value? Where and how can I change and view this? Thank you

    Jedlasquite360 pointsBadges:
  • SCP From iSeries to iSeries

    Hello All, Can someone help me on following Secure File Transfer issue: I want to Copy document existing in IFS from One iSeries to another iSeries server using SCP, both the servers are in the same network. I have SSHD running on host. I have followed following steps to transfer file, (I have used...

    sim400305 pointsBadges:
  • Sending iSeries spool files to a network printer

    I have a problem whereby my network printer is printing multiple copies of a spool file I have sent to it - it just keeps churning them out. The printer in question is an OCE' re-branded multi-function printer. I believe it's a VL2822C VarioPrint machine. Has anyone used these to print from an...

    Bristoldoug45 pointsBadges:
  • Avision AV2800 Scanner

    I am almost at the point of purchasing a new Avision AV2800 Network Scanner for our Company. Problem I have is whether it will enable us to save our scanned files directly on to an iSeries5 IBM Server. I have heard other companies with a "Windows" file server do not have any problems with this, but...

    Crescents5 pointsBadges:
  • iSeries Wireless Network

    We have an iseries 8203-E4A in our main office in NJ along with a SonicWall network device, we are thinking about going wireless in our office in California.   Any thoughts on speed and security?  

    Karens6180 pointsBadges:
  • Port 443 is ‘filtered’ to internet clients. How can I make it ‘open’?

    The problem is that HTTPS 443 port isn't accessible from interned, but it is open in local network. Our iSeries is connected to inet via L2TP withot IPSec. If no packet filters are active, nmap shows that ports 25, 80, 110 and even 10322 (WAS admin console) have state 'open' on internet ip address....

    MICHAELRUS5 pointsBadges:
  • Windows services connecting to iSeries

    Hi, We have an application which has an Authentication service running on a windows server and this service is connecting to the iSeries. In an unlikely event of iSeries not being available (eg if the backups are running longer than expected), the service tries to connect to iSeries and fails. This...

    Rockleadme385 pointsBadges:
  • QNTC Question

    Hello. I need Some Help with QNTC. When I try to do: wrklnk '/qntc/*' It takes about 6 to 7 hours to build the whole list of servers & PCs. It takes approximately 10 minutes to list 1 Server/PC. Also I get the following Msg: “Session initialization error with Network Server ABC1.” Message ID ....

    Garysegal5 pointsBadges:
  • Enabling Proxy ARP on a Virtual TCP/IP address

    How can I enable Proxy ARP to a virtual ip address on an iSeries WITHOUT using Ops Navigator? I'm writing a CLP to create ip addresses on the fly for role swaps

    Badkarma40 pointsBadges:
  • Options for Connecting 2 AS/400

    We currently have two iSeries connected via TCP in our network. One of the iSeries belongs to a division we no longer own and we are investigating removing them from our network. They will continue to perform services for us and are located close by. We currently have a number of DDM files setup...

    CFrey5 pointsBadges:
  • AS/400 and defualt routes

    I have a AS/400 that has a defualt route in it. I've added another NIC card to it and the only way that I can get traffic to go out the new NIC card is to set up static routes on the 400 to go out that new NIC card. If I take out the static all traffic goes out the normal default. Question is is...

    Gurowar40 pointsBadges:
  • Access iSeries ove VPN Tunnel

    I created a vpn tunnel connecting 2 of my offices together using a Linksys RV016 at the main office and a Linksys WRV54G at a branch office. The main office is using 192.168.0.x and the branch using 192.168.2.x. I am able to ping all of the pc's at the branch from the main office and I can also...

    Johnd2330 pointsBadges:
  • Transferring data from 1 iSeries to another

    We have 2 iSeries Servers, 1 for Production, 1 for Development. I have been asked to refresh our production data libraries on our Development System on a regular basis. My thought is to create a Save File of the data libraries on our Production System then FTP the Save File to our Development...

    wpoulin2,480 pointsBadges:
  • Use Data files on another iseries

    I have a application in which I run from one iseries and need to over ride the data files to a different iseries database server. How do I reference and over ride the data base files to the remote server?

    LCB5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following