1
  • How do you display user profile authority and object access

    Hi all, I would like to know if there is a command to check the private authority of a user profile over all objects inside the iSeries. Thank you

    iNewbie215 pointsBadges:
  • Strengthen QSECURITY level 30

    Hi, Any tips and tricks on how could i strengthen QSECURITY 30 to patch the loophole in this level (without going to QSECURITY 40)? Thank you

    iNewbie215 pointsBadges:
  • Logical File

    Hi, I have written two online programs.  The first one uses PRDATA-FILE.  The second one uses a logical file based on PRDATA-FILE.  When the screen of the first online program is displayed, the screen of the second online program does not display records.  Is this because PRDATA-FILE is locked...

    Elliet15 pointsBadges:
  • AS/400 performance tool

    Sir :  Our 3rd party vendor is requesting the ff : [em]      Please provide at least one month information about performance data in the AS400. You may request IBM to setup and activate the Performance Tool for AS/400. Data collection need to be in the interval of 5 minutes.[/em]      ...

    danmd5systemad370 pointsBadges:
  • Stand alone system being recovered to an LPAR

    When we do a D/R recovery from our stand alone 820 to a an LPAR on 870 we get an error that the OS keys is invalid. Have been told that when we load the LPA there is a step that will eliminate this issues. Does any know hat it is?

    Jimgruell5 pointsBadges:
  • Complete installation of Function Availability in iSeries Navigator

    Sir :        How do i complete the installation of additional FUNCTION AVAILABILITY under MANAGEMENT CENTRAL in iSeries Navigator since the function i need like MONITORS (i need this for the statistics) is labeled as NOT INSTALLED. This is also noticeable in My Connections where under a...

    danmd5systemad370 pointsBadges:
  • How to come up with storage statistics on iSeries 820

    Sir: As per requirement again from our 3rd party vendor in assessing our prod iseries 820 for system performance fine-tuning:      "System storage information – Size and percentage allotted to SIBS and other system, usage, backup in the prod server."       The main concern of the 3rd...

    danmd5systemad370 pointsBadges:
  • i-Series Tape Backup vs. SAVF backup

    My immediate supperior instructed me to compare which is faster, tape backup or Disk-to-Disk backup(SAVF) so i tested this just recently and as per outcome of my test, the tape backup was faster compared to the SAVF backup. Previously, i have the impression that the disk-to-disk backup suppose to...

    danmd5systemad370 pointsBadges:
  • How do I create iSeries group profile?

    i have a dilemma, im using iseries model 820 w/ OS V5R3 and i am tasked to create a group profile for 6 users and then enroll this newly created group profile to objects where this 6 users have *allobj access. Our security administrator will remove the *ALLOBJ in the userprofile of this 6 users....

    danmd5systemad370 pointsBadges:
  • No Logging

    We lost a power supply causing our 820 to crash during dayend processing. The jobd forces logging but we did got only a 1 page joblog when the system came back up with the date/time after the system IPL. Why did I not get a full joblog? It would have allowed us to figure out where processing...

    RCOMSTOCK25 pointsBadges:
  • AS/400 model 820 has a msg

    okon the panel while the machine isoff 10111520 fn 97P4024 and there is an yello error on the panel after i IPL'd the log showed CPP0109 Detect ac lost andthere is a clicking sound from the back the machine is working but complaining on power supply hasanyone replaced power supply ? whats is the...

    Dmonselise150 pointsBadges:
  • Iseries fails to boot

    I have a v5r4 820 model that failed. Error code in display is 284C3203 which pointed to I/O problem for either system board or Disk controller. I replace both and the only way I can get past this error is by using the new disk card with the new RAID memory. The old RAID memory card seems to have...

    Spadasoe5,130 pointsBadges:
  • SRC10111520 Power Supply Problem

    Hello, Recently we have a SRC10111520 displayed in operator panel and also in SAL log. This src is repeated evry ipl. Our server is Series 820 with the following config: 5157 Feature Power Supply 1 7127 DASD Expansion Unit 1 9002 Dual Line Cord Enabler 1 5157 feature means that a second power...

    Infoko65 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following