• g.729 3rd party VOIP on Cisco routers QoS – am I doing it right?

    Hi, I am unsure about which configs are sufficient for implementing QoS on 2 2600 series routers over a 2MB serial link. On one side is the IP pbx and there are up to 6 IP phones plugged into a switch on the other side. We are using a non-cisco VoIP product using g.729. From what I can see all I...

    Robbieg0 pointsBadges:
  • flags in ipv4 header

    the 3 flag bits in ipv4 header are. 1 - whether this fragmented part is last or not. 2 - to fragment a message or not. 3 - reserved. so if my message length is 500bytes and maximum segment size is only 200bytes and i want to send this messase but MIDDLE BIT VALUE IS 1.(that is do not fragment the...

    Jaanjaan0 pointsBadges:
  • rply soon-2

    plz tell me what is default gateway????

    Jaanjaan0 pointsBadges:
  • NAT on a Cisco 3524XL layer 2 switch

    Is it possible to use NAT on a Cisco 3524 switch? If so is it possible to see a sample template? Thanks Steve

    Devnul0 pointsBadges:
  • Routing Between Subnets and between networks

    1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected....

    Chinmoymohanty0 pointsBadges:
  • odd NIC problem

    Howdy all... I have a win2k3 member server with 2 onboard Intel PRO lan connections. One is 100mb the other 1000mb. On the 100mb connection, I can set either a DHCP or Static TCP address and it works fine. On the 1000mb connection, it works fine on DHCP, but absolutely refuses to connect with a...

    TheVyrys0 pointsBadges:
  • cisco 2811 with 2 fast ethernet ports and 4 vlans

    I need urgent help on this. I have a brand new cisco 2811 with 2 FE ports. The port f0/0 is connected to the internet and the f0/1 will be connected to the switch which has 4 vlans configured on it. I have no idea how to go about doing this. Can someone please help me with the configuration on the...

    Sarfarazkz0 pointsBadges:
  • Network Resource Allocation cum Planning cum Technical Problem

    This is the real commercial problem face by my company. Well, the reason I ask this problem is I salute and respect all of you as I believe all of you are as good as network solution company out there, or even better!! Lets me rephrase the entire problem again. Company expand so fast that the IT...

    Hunkgym5 pointsBadges:
  • bgp inbound filter

    Does anyone have any experience configuring BGP filters? If so, here is my dilemma: One of our core routers is hooked up to ISP A via BGPv4 and is recieving the full routing table of which is in excess of 100,000 networks. I would like to have it recieve routes only from ISP A's AS, and NOT every...

    Ligmania0 pointsBadges:
  • Running out of IP addresses

    We've been using 192.120.197.x with a subnet mask of 255.255.255.0 for our network for years. Due to adding more and more systems, we're quickly running out of available addresses. What is the easiest way to get more address? Can we simply change the subnet to 255.255.0.0 on all our devices?...

    DKoch675 pointsBadges:
  • Loadsharing between two ISPs

    dear sir, I am looking for a load sharing solution between 2 leased lines for 2 different ISPs the diagram goes lke this: LAN-->Cisco Pix-->Router-->2 leased lines. can load-sharing be done at the router without extra configuration at the providers side? can CEF (cisco express forwarding)...

    SkullyMJ0 pointsBadges:
  • Remote Syslog with MySQL and PHP

    Dear All, i want to set up a Remote Syslog with MySQL and PHP on system with whitebox linux,can some tell me a step by step on how to install and configure this,also the requirement needed to complete the task Regards Edwin

    Eduado0 pointsBadges:
  • Optimizing printing and imaging environment

    how can i Optimize printing and imaging environment

    Eduado0 pointsBadges:
  • Re: Windows Time server

    Hi All, Let me give an overview of our forest: We are on a Windows 2000 mixed mode forest. We have 2 Dc's in my parent domain and a standalone ntp server not on our domain but within our network segment which goes out to get time from Microsoft time server. On PDC emulator we set this sntp server...

    Shabuitty0 pointsBadges:
  • Setting Up VLAN across WAN link for Testing

    I am trying to setup a Vlan via a WAN Link. Local End has already 4 VLANs. Remote End doesn't. Remote end needs to access VLAN id 4 via the WAN link. Local Gateway router = Cisco 3660 Remote Gateway Router = Cisco 3660 Local Switch = Cisco 3750 Remote Switch = Cisco 2924 What is the config that...

    Aparian0 pointsBadges:
  • Transferring a Domain

    Hi All, I have a server running on WindowsNT 4.0, we are upgrading to server 2003 on new machine and removing the old machine entirely from network, Could any body tell is there any way of transferring the exisiting users and policies/ entire domain setting to new machine as it is, and not making...

    Inamhaque15 pointsBadges:
  • Upgrade step from win nt and win 2000 to win 2003

    I have windowsNT and window 2000 servers with active directory which i want to upgrade to windows 2003,all servers meet requirement for new vesion.Now can same help me on how to upgrade?what steps should i take

    Eduado0 pointsBadges:
  • RIP Timers

    Dear all, I am confused on RIP timers. Especially, Hold-Down timer. Can someone de-brief me with an example sceanrio that how each timer in RIP behaves and the co-relate with each other?

    SADnBLUE0 pointsBadges:
  • Restricted Groups

    Hi Guys I have a query regarding the usage of restricted group in a domain enviroment. Could some pls explain the steps required to add Domain Administrator Account to the Local Administrators Groups of a node. I know this can be done but m not sure bout the steps. Please HELP!!!! Thanks Guys Asta...

    MithunMCSE0 pointsBadges:
  • Synchronization of application servers

    hi all my company has about 30 application servers,so when i want to install something i have to do it on 30 servers which is very time consuming.due to this I Need a way to update all application servers using a single installation routine. can someone help please

    Eduado0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following