• Printer IP static issue

    Hi, For example I have device like a printer I set IP address to static at 192.168.1.100 Users printer driver configure wrongly at 192.168.1.50 when they send print jobs printer able to print. Why is that since I already set the printer IP to 192.168.1.100? At the back end, there's no port...

    ITISPOWER5 pointsBadges:
  • Creating an IP adressing scheme

    Hi I am a system administrator and we are expected to make remote branch, all it matters is on my best solution I provide, else its gonna be in pipe, the question is to create IP addressing schemes for the Site B and Site A (main).All departments need to be in separate subnets.The external IP...

    DigitalDrop40 pointsBadges:
  • Switch IP

    How can I check my IP address for switch?

    khurramalikhanasad10 pointsBadges:
  • Hide remote IP

    I run a web server on my PC but I want to hide my remote PC of my PC by my user. How can I do it? Here is one what I have done http://gameworld.no-ip.net/ Its no-ip nameserver of my ip.. Please help me for IP masking. Thanks.

    rohit73735 pointsBadges:
  • AirPlay

    I have a tplink also router. Wirelessly I connect my samsung smart tv , appletv , iPad and laptop working fine. But when I try to pair my iPad with appletv through AirPlay most of the time it doesn't see it at all. I don't know when it does actually. Same with remote app of the Samsung smart tv....

    Trehan10 pointsBadges:
  • How to identify a rogue IP in the network

    Hi guys, I have detected an unknown IP within the range of 10.119.8.8 which is an un-used segment in our network structure. The host is not ping-able anymore and traceroute has no reply after a few hops. What are the ways of me identifying the location of this IP?.. and how come a device can be...

    jamrock10 pointsBadges:
  • IP default 0.0.0.0

    Teen messed with system config while downloading ( I don't know). I did unsuccessful system restore from external drive. Config & drivers not right. Now all IP's are set by default to 0.0.0.0. Can somebody please suggest where to start fixing this?

    Student4tech5 pointsBadges:
  • Protocol ARP //#

    Does anyone know what this is, and what programming language ? Protocol ARP = ARPDescriptionTable(OpCode, ARPSrcHardAddress, ARPSrcAddress, ARPDstHardAddress, ARPDestAddress,SourceIPv4Alias,DestinationIPv4Alias) { UINT16 HardwareType = HardwareTypeTable(this); UINT16 ProtocolType =...

    8ae8f9e0a8fa0fa50 pointsBadges:
  • How to find the IP address of the system from which user had logged in

    How to find the IP address of the system from which user had logged in to AS/400 server?

    Dinnu360 pointsBadges:
  • does not detect local IP address.

    I have Asus A55A Series laptop. It has core i3, 4 GB ram, windows 7 64 bit. I have DSL connection. Every driver of every device is properly installed. when I connect LAN cable or connect laptop via WiFi. It detects the network and connects after WiFi password but It does not detect the default...

    Xaphar220 pointsBadges:
  • Changing the remote queue IP address of the printer

    How to change remote queue IP address of the printer from an existing IP address?

    didinu760 pointsBadges:
  • SLARP

    In GNS, I manually assigned IP address to the serial links between two routers, and also made two more areas. All of them are running OSPF. When I restarted all the routers, I found out below that some interfaces it is shown as SLARP (using the command #show ip int brief). Does anyone know how this...

    Harrypotterr285 pointsBadges:
  • Configuring CISCO 1841

    Hi, I have Cisco Router 1841 set up with this connection: PC1 --> Router 1841 --> NTU --> ISDN Network --> NTU --> Router 1841 --> PC2. I already configured the IP address in the router and want to know how to configure ISDN protocol in the router in order to get full ISDN network...

    gangnam5 pointsBadges:
  • Internet Routing

    Does routing between two fixed IP address stays the same all the time or it changes from one session to another. i.e. one IP in Florida and another in Texas. When you trace-route between this two points do you get the same trace every time.

    aasalem70 pointsBadges:
  • Question on changing status of iSeries IP address

         How do you change the status of IP address in iSeries from ACTIVE to INACTIVE after performing IPL? I need to know the procedure on doing this because In our scheduled DRP testing activity, there's a part in that activity where i have to configure an existing Production IP address for...

    danmd5systemad370 pointsBadges:
  • Locking down network settings to local admins

    How can the network settings be locked down even to local administrators. We track users based on IP and we don't want to compromise our results or skew them with people monkeying around.

    TeachMeIT975 pointsBadges:
  • DNS Server IP Address

    Though DNS Server IP Address is configured, system says Invalid address- help

    LeoTex10 pointsBadges:
  • Connecting server to public IP address

    i cannot able to connect my server using public IP address?what will be the error?please help?

    Rajasekhar151,395 pointsBadges:
  • IP address for SMTP gateway

    How do I find out the smtp gateway IP address of the server for my outgoing email?

    Imstuck5 pointsBadges:
  • IP address for local server

    How do I find the IP address of a file server on my as400

    Lacag100 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following