1
  • How to confgure VLAN with DHCP?

    I need to configure VLAN for blade center. I need the VLAN to give IP to all the nodes on the blade center. What are the commands to configure the VLAN with DHCP for the blade?

    DHCPVLAN5 pointsBadges:
  • Blade servers for a small business?

    Anyone have any good advice or servers they have used in a small business environment. Looking at Dell, HP, Sun and maybe IBM. Not looking to break the bank. Any guidance is appreciated.

    ITKE347,565 pointsBadges:
  • PSOD with ESX 3.5

    Hello all, I have 2 ESX hosts running 3.5 from time to time, they are giving me a PSOD showing this error in the coredump: COS error : Lost Heartbeat (comm=swapper pid=0 t=29 t0=30 clt=1 I already opened a case with VMware support, but any ideas, what is this all about? or how can it be solved? in...

    Srv200315 pointsBadges:
  • Seeking answer for IBM Blade Center WorkShop 1

    Hello I am currently taking IBM Blade Center Certification with out attending any class. I have down loaded all teh red books related subject matter. I am still having problems answering some question. Test is XW0011R3.20 dose any one out there have any ideas how I am able to master this test....

    Noor435 pointsBadges:
  • Virtual machine per blade server

    Hi,. Quick question, how many VM servers can you run these days on a blade server (HP or IBM bladecenters), I guess thius depends on the CPU's and memory on the blade right? Assuming I had 8GB memory and 2 phyiscal CPU's. The blade server would be running virtual Citrix PS4  

    Interviewer10 pointsBadges:
  • DPM and IBM blade servers

    I dont know abcd also regarding blade servers. Could anyone explain me what is IBM blade serverand chassis. Difference between DPM2 and IBM blade servers Thanks in Advance

    Madipivindya10 pointsBadges:
  • How does network traffic travel between VM’s on different blades in the same BladeCenter?

    we have several ibm bladecenters H with a few hundred hosts across the blades. i know that on stand alone servers, VMs on the same vswitch don't have to send network traffic out to a physical switch to pass data back and forth, it goes through the vswitch to the other VM, but how does data move...

    jonevans5 pointsBadges:
  • ESX 3.5 Networking on IBM BladeCenter E

    I'm looking for suggestions on the best way to configure failover networking using 4 Cisco IGESM switches in the 4 bays. Currently, I have all 4 ports on each switch configured for GEC, but if a switch fails, there is no failover to one of the other switches. Switch1 is for Service Console, Switch2...

    EFStruttin5 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following