• Sony VAIO laptop will not recognize CDMA 3G in PCM/CIA slot

    I have a PCG-V505BL sony laptop, I had a wreless CDMA card in it at one time, I have a new verizon card and it will not recognize it I have removed the software and drivers for the devices and reinstalled and still nothing. I tried a SPRINT card same thing, the cards are good, I inserted a WiFi...

    Jwells19640 pointsBadges:
  • 802.11 vs 802.16

    I have a small co. with a point to point wireless grid. I handle off site monitoring of gas nad oil flow. I have been overlaping my grid with new locations, and more to come. So I have been looking into new wireless Sys. I have made the choice to use All-In-One?360 Multi-Band/Multi-Mode Antenna...

    Cablegeeks0 pointsBadges:
  • Wireless Connection to Internet

    Hi all, My client has a Dell laptop with inbuilt Intel wireless NIC and onboard Ethernet NIC successfully connecting to a Minitar wireless hub/access point. The AP is connected to an Alcatel Speedtouch Home ADSL modem. When connected via Ethernet he can access both local devices and browse the...

    Backbyrner0 pointsBadges:
  • Multiple inputs for a web server’s router/switch

    Apologies if this is a simple question. I haven't had much prior experience with networking hardware, hence the researching. Say hypothetically we had a glorified desktop that was going to be a web server with around 100 users, each with their own webspace. We would want to be able to cope with a...

    Frangipani0 pointsBadges:
  • cisco 2811 with 2 fast ethernet ports and 4 vlans

    I need urgent help on this. I have a brand new cisco 2811 with 2 FE ports. The port f0/0 is connected to the internet and the f0/1 will be connected to the switch which has 4 vlans configured on it. I have no idea how to go about doing this. Can someone please help me with the configuration on the...

    Sarfarazkz0 pointsBadges:
  • Network routing

    Hi! Our company have two locations. Each location have two routers. Let say, Location1 have network 192.168.1.0 with routers 192.168.1.9 and 192.168.1.10. Location2 have network 192.168.2.0 with routers 192.168.2.9 and 192.168.2.10. All routers are connected to internet. Router 192.168.1.9 and...

    Soft4you0 pointsBadges:
  • router for home network with cable connection

    I apologize in advance for asking such a beginner's question, but I am planning to get cable high speed internet and want to get a router before I do (to save money). I have an old desktop, running win98se, and a newish laptop, winxp with wireless capacity. Also an old mac which I'm not planning to...

    Elnodel0 pointsBadges:
  • Group Policy-Internet Access

    I use the old trick of bogus settings for the proxy server in Group Policy. I have as an example: OU1-Internet Access OU2-No Access When I move anyone from the OU2 to OU1 to allow them access, the proxy address still remains in the settings. I can manually change it back, but cannot get it to do so...

    TheVyrys0 pointsBadges:
  • Can’t login as Administrator

    Hello Everybody, I can't login to adminstrator profile in my standalone win 2000 adv server. I use this system for my study purposes. What happened actually is when I was shuting my system, it got powered off because of some UPS problem and the next time when I logged in using Administrator, it...

    BinooDas123410 pointsBadges:
  • Opinions about firewalls and VPN

    I currently have watchguard firewalls and IPSec tunnels between them and the other watchguard firewalls. We also have remote users VPN into the firewall for access to our network. Our firewalls are fine but we haven't been that happy with the support over the last 5 or so years. We are joining...

    Kevins740 pointsBadges:
  • T1 cabling

    What would be the best physical layout to split a T1 connect? I want to implement to two routers in a active/standby role on one side of T1, in case one router dies i want the standby to come and use the T1. I've tried to implement this in a lab to no success with a T1 cable in each router going...

    Ligmania0 pointsBadges:
  • Conference rooms in Exchange & Outlook

    I am looking for the best way to handle conference rooms within Exchange and Outlook to make them easy to schedule, update, and access. I have Exchange 2003 on a Windows 2003 Server and I have 9 conference/meeting rooms. Right now I have a calendar setup for each one and the person has to go in and...

    Kevins740 pointsBadges:
  • Network Manager

    I am a recent hire Network Manager for a technology charter middle and high school. I am to develop and maintain a WAN connecting both sites. My job functions are as follows: 1. Administer LAN for middle and High School. 2. Develop and maintain WAN connecting all sites. 3. Purchase, install, and...

    Jevone0 pointsBadges:
  • 10Gbps backbone

    hi i need some help completing a uni assignment. i have a 10Gb SMF cable backbone and i need to connect to a router that supports this. it also need to interface with the rest of the LAN, cat5e cable. i cant seem to find anything viable. any suggestions??

    Mattjgregory0 pointsBadges:
  • VLANs

    In my network we configured 5 VLANs( STATIC VLANs) and placed each switch in each floor. I want to allow my manager to access all VLANs from any where he connects the network. how do i configure this setup? Thanks & Regards, Rajesh.M

    Mraj270 pointsBadges:
  • URGENT PROBLEM – ENABLING INTERNET ACESS THRU VARIOUS SUBNETS IN A WAN CONFIGURATION

    Hello All, I have a problem currently with my current WAN setup accessing the internet.Pls help! Configuration: 4 locations connected via ADSL Leased Circuits in a WAN Setup Internet Access via cable modem connected to Netgear wireless router in 10.10.10.0 subnet NO DHCP Server running in WAN HQ...

    YNWAJLEE0 pointsBadges:
  • LAN vulnerability behind a Router – with firewall – connected to the Ineternet (Through an Open Port!)

    Hi, I would just like some reassurance: I have a Router on my LAN that connects all host PCs to each other and the internet. Qu: How exposed is my LAN behaind the Router that has a port open for internet access (and in future anther for remote desktop terminal connection) would a port scanner see...

    ToneEzeeJ0 pointsBadges:
  • Network Resource Allocation cum Planning cum Technical Problem

    This is the real commercial problem face by my company. Well, the reason I ask this problem is I salute and respect all of you as I believe all of you are as good as network solution company out there, or even better!! Lets me rephrase the entire problem again. Company expand so fast that the IT...

    Hunkgym5 pointsBadges:
  • Design NEW network cum NEW IT infrastructure-2

    Company expand so fast that the IT infrastructure is not fast enough to cater high volume of traffic; the initial design is not scalable. The number of new branch offices setup caused the company pay a high price in the leased line communication. Salesman and management staffs dial into company...

    Hunkgym5 pointsBadges:
  • LAN vulnerability behind a Router – with firewall – connected to the Internet (Through an Open Port!)

    Hi, I would just like some reassurance: I have a Router on my LAN that connects all host PCs to each other and the Internet. Question: a) How exposed is my LAN behind the Router that has a port open for Internet access (and in future anther for remote desktop terminal connection) would a port...

    ToneEzeeJ0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following