• Routing Between Subnets and between networks

    1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected....

    Chinmoymohanty0 pointsBadges:
  • Router behind a router

    I am trying to put a Linksys WRT54G at the end of a Cat5e segment to create an extended star, off of a Netgear WGR614. I have set the 614 to have the address 192.168.1.254 with the DSL as the default gateway. I have tried to create a static route, on both the Linksys and the Netgear, and tried to...

    Nu2dgame0 pointsBadges:
  • Networking prep

    Hiya guys, I have an interview next week, and in the pre screening phone interview a few questions came up about the port numbers used in networking and what they were used for, oh yeah, and the 7 layers of the OSI module. I Know a little bit of thew OSI, but is there any online papers etc, that...

    Carl0s810 pointsBadges:
  • Accessing Mail Server

    I have remote users who are not allowed on the domain... At times they need to work in the main office and log in via wireless directly to the Wirelss ADSL modem/router.. putting them in a different ip range to the domain. Internet access works well with this arrangement but they are unable to get...

    Arron250 pointsBadges:
  • Networking DHCP growth

    Okay, probably a simple question for a lot, but my experience has been more along the lines of many offices, with a typical setup of a border router (cisco, firewall (watchguard, new cisco ASA's, Windows 2003 server DC, exchange server, etc....) I have been doing this a while now and have been...

    Kevins740 pointsBadges:
  • losing network connection

    hi, i'm relatively new to this job and so far am self taught. running a school network that i took over from the previous tech. the problem i'm experiencing is one suite keeps losing the connection. there are five pcs in the room and the switch 10/100 ethernet says not recieving signal. if i...

    Jezwall0 pointsBadges:
  • odd NIC problem

    Howdy all... I have a win2k3 member server with 2 onboard Intel PRO lan connections. One is 100mb the other 1000mb. On the 100mb connection, I can set either a DHCP or Static TCP address and it works fine. On the 1000mb connection, it works fine on DHCP, but absolutely refuses to connect with a...

    TheVyrys0 pointsBadges:
  • Application connectivity, client to server

    Application: Companion EMR. I have a Toshiba Tablet that was working fine. Now it will not allow the client application to access the server portion. The server is on another network, in the 192.168.0.x, this laptop will not access the server unless it is in the same network, when in .2 or .4...

    Gforsythe75 pointsBadges:
  • Cisco Load sharing with port forwarding different ISP’s

    I have a 1811 series router now its set with dual internet connections two different ISP's I have 2 default routes basically It should load balance between two now my concern is I need a port forwarding as we use privite space addressing. I am including current config addresses have been changed to...

    Dimchik0 pointsBadges:
  • Network cabling- new rack

    I never had the opertunity to completly rewire and set up a Rack with patch panels and new gig switches. I know the basics, and have maitained equipment already setup. My question is when cables are run and brought to the patch panels, do I wire everything into the panels and then from the patch...

    Coyoteken0 pointsBadges:
  • Static IP on LAN

    Hi All, I have 2 machine running on 2003 and 1 on XP, All 3 machine connect to a router via switches which also also has ability to generate DNS. One of the 2K3 machine is main domain controller server. All is fine, but problem occurs when I assign a static IP to an another 2K3 machine for remote...

    Inamhaque15 pointsBadges:
  • VPN problem

    Hello!I can connect directly from my cable modem to my laptop, browse the internet fine, then connect to my vpn and within 13 seconds it freezes everything. It still says I am connected to the vpn and internet however I cannot browse the internet at all. I then disconnect the vpn and immediately I...

    FrazzledK0 pointsBadges:
  • Server Room setup

    I have 152 computers in a 4 story building, how many servers would i need.

    Egrah990 pointsBadges:
  • Windows DHCP problem.

    I think I may be mssing something simple, but here is my setup and problem. I have a Windows 2003 server w/active directory, DNS, and DHCP configured. The server is connected into a cheap D-Link switch. I have one Windows XP workstation also plugged into the switch. My goal is to have the server...

    Skepticals0 pointsBadges:
  • SECURE FTP SITE ON Windows 2003

    We have a Windows 2003 IIS server setup behind our firewarll which is a PIX firewall. What is the best method to establish a secure FTP site on this IIS server? I have reviewed this topic on the internet and actually talked with somebody from IPSWITCH and the best method available is to purchase a...

    Mconfer0 pointsBadges:
  • Sony VAIO laptop will not recognize CDMA 3G in PCM/CIA slot

    I have a PCG-V505BL sony laptop, I had a wreless CDMA card in it at one time, I have a new verizon card and it will not recognize it I have removed the software and drivers for the devices and reinstalled and still nothing. I tried a SPRINT card same thing, the cards are good, I inserted a WiFi...

    Jwells19640 pointsBadges:
  • 802.11 vs 802.16

    I have a small co. with a point to point wireless grid. I handle off site monitoring of gas nad oil flow. I have been overlaping my grid with new locations, and more to come. So I have been looking into new wireless Sys. I have made the choice to use All-In-One?360 Multi-Band/Multi-Mode Antenna...

    Cablegeeks0 pointsBadges:
  • Wireless Connection to Internet

    Hi all, My client has a Dell laptop with inbuilt Intel wireless NIC and onboard Ethernet NIC successfully connecting to a Minitar wireless hub/access point. The AP is connected to an Alcatel Speedtouch Home ADSL modem. When connected via Ethernet he can access both local devices and browse the...

    Backbyrner0 pointsBadges:
  • Multiple inputs for a web server’s router/switch

    Apologies if this is a simple question. I haven't had much prior experience with networking hardware, hence the researching. Say hypothetically we had a glorified desktop that was going to be a web server with around 100 users, each with their own webspace. We would want to be able to cope with a...

    Frangipani0 pointsBadges:
  • cisco 2811 with 2 fast ethernet ports and 4 vlans

    I need urgent help on this. I have a brand new cisco 2811 with 2 FE ports. The port f0/0 is connected to the internet and the f0/1 will be connected to the switch which has 4 vlans configured on it. I have no idea how to go about doing this. Can someone please help me with the configuration on the...

    Sarfarazkz0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following