Disk Mangement in Window 2003 Server ?
Hello someone!!! I have an HP Proliant DL380 G6 Special Server, I configure Array A. and B. On Array A, I have RAID 1 Configure with 2 146 HDD and on Array B. configure raid 5 with 3 146 HDD SAS. RAID went well but RAID give me an Information and error code of 786 [...]

Answer Question   |  December 14, 2009  12:16 PM
Array, HP ProLiant DL380, RAID, RAID configuration, Windows Server 2003

HP DL380 G3
We are configuring DL380 G3′s and are wondering if you can configure 36GB 10K drives with 18GB 15K drives or 36GB 15K drives within the same server?

Answer Question   |  July 2, 2009  5:13 PM
HP DL380, HP DL380 G3, HP ProLiant DL380

iLO2 jumper settings on HP Proliant DL380
How to override switch for default ILO2 settings

Answer Question   |  June 9, 2009  2:10 AM
HP Integrated Lights-Out, HP ProLiant DL380, iLO 2 jumper settings, Integrated Lights-Out 2

Adding Clients to a Server 2003 Domain
I have been struggling with this issue for several weeks now. We have a school network that I am trying to support. I was not there when it was installed and there was no real documentation left behind. !) Comcast is out provider and we have an ethernet cable going from the cable modem to [...]

Answer Question   |  June 3, 2009  6:19 PM
Cisco Catalyst 1900, Domain Controller, HP ProLiant DL380, HP ProLiant DL380 G3, Network Topology, Network troubleshooting, Windows Server 2003

Warning Message in HP Insight Diagnostics
I am receiving a warning message in my HP array diagnostic utility. For all hard drives It is listing the following message. “WARNING: FAILED TO WRITE TO APPLICATION CLIENT LOG”. This is on an HP server running Windows Server 2003. ProLiant DL380 G4 Thanks

Answer Question   |  April 14, 2010  8:44 PM
HP Insight Diagnostics, HP ProLiant DL380, HP ProLiant servers, Windows Server 2003