• cannot ping from router-2

    hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1700 series router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the client end i...

    Xevier0 pointsBadges:
  • Windows Media Player on XP Pro SP1 & SP2

    I have a batch of pc's that receive the following error when launching Windows Media Player: This application has failed to start because PTNET32.dll was not found. Re-installing the application may fix this problem. I have tried removing and adding through the add/remove windows components utility...

    StarTek0 pointsBadges:
  • problem with exchange sync and pocket pc 2003

    i have a HP iPAQ hx4700 with Pocket PC 2003 on it that connect to the internet through my phone cellolar (with bluethooth connection), i want to sync all my contact and my calender on my ipaq to my exchange small buisness server 2003 through the internet,my server connect to the internet and are...

    Drorbenyosef5 pointsBadges:
  • Installing PTFs questions and concerns.

    I am now responsible for installing PTFs on the as400. I will be performing my first install on June 25th. I have some questions if someone doesn't mind helping? 1. Documentation says to check the CD to make sure that it works. I put the CD in my CD drive at my local PC and browsed through the...

    Bkr0963c0 pointsBadges:
  • File Permissions

    I tried to change the access permissions on a folder on the server to limit the munber of people able to access the spreadsheets in it. This for some reason changed the whole folder to read-only. I have tried to fix this but the read-only box is always checked in the folder properties. However, i...

    Mcandrcp0 pointsBadges:
  • Wireless LAN roaming

    I need to set up a wireless LAN (ADSL router with 3-4 access points). The client wants to be able to move between the access points without being cut off from the internet. Which products will do the job? Any special design considereations?

    Benbje0 pointsBadges:
  • ZOS support of CICS 4.1 and IMS 6

    I know IBM does not support CICS 4.1 and IMS6. But is anyone running them on a Z890 under ZOS 1.4? Or there are know problems and should not be attempted?

    Rodolfo0 pointsBadges:
  • p-com APG radio

    Has anyone ever used a p-com AirPro Gold radio ? Can you please tell me what should be the LED status during normal operation? Also various other configuration parametres. thanks for help....

    Xevier0 pointsBadges:
  • Using NT Bootloader to Dual Boot XP for Ghost Recovery of System

    I've been asked how to do this privately via ITKnowledge Exchange. I thought I'd submit my response(s) for anyones comment/ideas. ColinNZ

    ColinNZ0 pointsBadges:
  • pinging from a router

    hi all, can you tell me what is the difference between pinging from a router and from a terminal.i have a cisco router.when i ping a remote router from my router it doesnot but when i ping the same remote router with the terminal attached to my router it pings.also sometimes when i ping from router...

    Redrose0 pointsBadges:
  • NDS to AD migration

    I have three servers that I am wanting to migrate off of NDS to AD. What is the best tool I can use for migrating the NDS file system and rights over to AD. I am doing this project around July 05. Ant suggestions or tips?

    WPG10930 pointsBadges:
  • Recommendation of Win2k srvr HDD perf monitoring

    Can anyone recommend what Performance Log Counters they would configure their Win2k server to monitor its disk, RAID controller, and other hardware / software settings that supports a server?s data storage and transfer of data (e.g. SCSI card, Hard Drive, Paging, I/O, etc.)? I have to set up a hard...

    KeithD19670 pointsBadges:
  • ping from outside

    hi, could you please tell me which command in cisco routers prevent them from being ping from outside networks. and also how can i prevent terminals inside a network to ping outside ips(group policies etc??). thanks

    Redrose0 pointsBadges:
  • Using Canon Multi-function printers

    We have Canon IR1610 and IR1620 printers which we are attempting to set up as IP printers. The problem we have appears to be that the standard HP setup that we use is not recognised by these printers when the data stream arrives. Is there a MFRTYPMDL that I can use to get around this or is there...

    Graeme0 pointsBadges:
  • AS400 model 170 connection with 9910 UPS CPM cable

    I have to connect AS400 model 170 with 9910 UPS. Anybody knows which plug of CPM cable connects to AS400 side, grey or black one. Thank you.

    Ddomic0 pointsBadges:
  • Symantec Ghost automated backup/cloning

    Hi there I'm trying to get my parents a nice backup system. By using ghost I wanna see if it can be possible for them to use like a desktop icon to click once (or as few clicks as possible) and their system to be backed up to another drive. I want to use Ghost 2004 or 2005. They don't know much...

    WikusIT0 pointsBadges:
  • Print Screen problem using Client Access v5.7

    Does anyone know how I can fix this problem: when I print screen using Client Access v5.7 to a network printer, a blank page prints.

    Bdeprima0 pointsBadges:
  • Internet Explorer with 2 NICs

    on a server 2000 machine with 2 NICs, is there a way to point internet explorer at a particular NIC?

    Zzegri0 pointsBadges:
  • Folders on AS/400

    Whenever I try to access folders on the AS/400 using the WRKFLR command I get an MCH3601 error message. I need to be able to access the data in the folders to process the data in a PC application.

    Muddigger5 pointsBadges:
  • My New Telephone Project

    Hello Dear Friends, I am student of computer science here in pakistan. I am starting a project related to computer interfacing. i want to control home appliances through telephone, but i cann't decide where to start. can any friend like you help me in this regard?. I shall be thankful to all.

    Yourfahim0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following