how toconfigure ipadress through run
plz tell me how to configure ipadress through cmd prompt or through run??????

Answer Question   |  May 17, 2007  7:37 AM
Availability, Bandwidth, Business/IT alignment, Cabling, Hardware, Hubs, Networking, Ping, Project management, Routers, Switches

how to transmit the data from a server to an outdoor led display through bluetooth technology
how to transmit the data from a server to an outdoor led display through bluetooth technology? what procedure should be followed?

Answer Question   |  May 15, 2007  3:09 PM
Hardware, Routers, Wireless

SUBNETTING
Hi What is the broadcast address for the IP subnet 192.168.100.32 given a subnet mask of 255.255.255.224. I want to know step by step procedure on how to get the right ans. Brgds Mark

Answer Question   |  April 13, 2011  4:20 AM
Cabling, Cisco, Hardware, Hubs, Networking, Routers, Switches

Laptop Won’t Read SD Card
HI, I have a Compaq Presario X6000 and I’m attempting to download pictures from my PNY Technologies 2.0 GB SD Card, but my laptop won’t recognize it. Any ideas on getting it to work properly? Thanks, Juan

Answer Question   |  May 3, 2007  10:38 PM
Hardware

DNS Packet Drops
The server running on windows 2003 (not primry domain) is used as DHCP server to issue client IP. I configured a 2wire router on this. but the conectivity to server keeps droping now and then. Could anyone here please let me know the possible cause? Best regards,

Answer Question   |  May 4, 2007  12:31 PM
Availability, Bandwidth, Cabling, DHCP, DNS, Hardware, Hubs, Microsoft Windows, NetBIOS, Network monitoring, Networking, Networking services, Performance management, Ping, Routers, Switches, TCP

Remote Printing Problem
We have 2 HP Laserjet 2430TN printers configured as ‘Remote Printers’ on the AS/400. The 1st one was configured early in 2006 and is working perfect. The 2nd one was recently deployed. In our best efforts the 2nd printer was supposed to memic the 1st printer (except for the name & ip address). Now, here’s [...]

Answer Question   |  April 26, 2007  4:38 PM
AS/400, DataCenter, Hardware, Interoperability, Networking, Printers, Printing, Software, Tech support

server temporary freezing
I have Dell poweredge 700 with Dell CERC SATA 1.5/6ch Raid controller card in RAID 5 I have about 20-30 stations connected to it at any moment. The disk queue is small below 1 from time to time people will experience desconnection problems such as i will try to access file and server will stop [...]

Answer Question   |  August 27, 2010  4:08 PM
DataCenter, Desktops, Hardware, Management, Microsoft Windows, Networking, OS, Security, Servers, Software, SQL Server, Storage, Tech support

career change: programming to networking
I’m looking to move from programming to network administration and eventually security. I need advice. I have an AA degree. I did tech support and programming part-time in college. Since then, I’ve spent 2.5 years as a programmer (with some IDS responsibilities), 1.5 years doing QA on niche-market network appliances and am currently an IT [...]

Answer Question   |  July 27, 2011  1:31 PM
Cabling, CCNA, Hardware, Hubs, Networking, Networking certifications, Routers, Switches

Using a switch to connect three computers to my 3Mbps Cable Internet access Modem
I have two kids that fight constantly over the internet. Please help me stop it. I would like to get three computers to connect to the internet with my switch(5port DYNEX 10/100 Fast Ethernet). I don`t care if it slows down. I used to be on 56k. Win XP PRO and NICS(all the same), 2 [...]

Answer Question   |  March 26, 2007  10:21 PM
Cabling, Hardware, Hubs, Routers, Switches

Laptops Lose Login Credentials.
Hi All In our company we have about 150 off site users with Dell D600 and D610 laptops all running XP Pro, they all have roaming profiles on them. What it is, now and again certain users, will phone and say they cannot logon with their login credentials, loggin on with the local administrator account [...]

Answer Question   |  March 3, 2007  8:14 AM
Hardware, Networking, Security, Tech support

Cache Battery Replacement
We have a 9406 Model 170 that has a failing cache batter pack. We no longer carry maintenance on this particular machine so I?m going to have to replace the part myself. Can anyone guide me to information on how to perform this procedure? I?m not even sure where the cache battery is located or [...]

Answer Question   |  January 1, 2010  3:30 PM
AS/400, Hardware

Strange error message from Cisco 2980 router
Hi, I’m getting an error message from my Cisco 2980 switch when I type “write mem”. The error message is “This command is available only in text configuration mode.” I have another identical switch but I don’t get an error message when issuing the same command. The CATOS is 8.4(11)GLX. The diffective switch was recovered [...]

Answer Question   |  November 28, 2007  2:05 PM
Cisco, Hardware, Networking, Routers, Tech support

Hard Drive Erase & Clone
Is anyone familiar with the following software: 1) FarStone DriveClone 2 2) Paragon Disk Wiper 7.0 Personal Researching cloning cloning applications. Any suggestions. Thanks Len

Answer Question   |  August 2, 2009  2:08 PM
Development, Hardware

What is NAT port forwarding?
Describe in brief how you would set up port forwarding on a NAT router to allow a PC on the LAN to publish its web to the internet.

Answer Question   |  February 22, 2008  6:23 PM
Access, Availability, Cabling, DataCenter, Desktops, DHCP, DNS, Exchange, Hardware, Hubs, Instant Messaging, Lotus Domino, Management, Microsoft Office, Microsoft Windows, Network applications management, Network management software, Network protocols, Networking, Networking services, OS, Ping, Protocol analysis, Remote management, Routers, Security, Servers, SQL Server, Switches, TCP

IDE devices
How many IDE devices could the standard motherboard handle?

Answer Question   |  February 5, 2007  5:39 PM
Cabling, Handheld, Hardware

Dynamic updates to a DNS Server
What Windows Operating Systems support dynamic updates to a DNS Server? Which service needs to be running on the clients?

Answer Question   |  February 22, 2008  4:38 PM
Access, Availability, Bind, Cabling, DataCenter, Desktops, DHCP, DNS, Hardware, Hubs, Management, Microsoft Windows, Network management software, Network monitoring, Network protocols, Networking, Networking services, Novell NDS, OS, Ping, Remote management, Routers, Security, Servers, SQL Server, Switches

Ethernet cabling
What is the wiring colour-sequence for Ethernet cabling?

Answer Question   |  January 31, 2007  4:22 PM
Cabling, Hardware, Routers

Routing Between Subnets and between networks
1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected. What should i configure and where to configure [...]

Answer Question   |  January 10, 2007  4:12 AM
3Com, Active Directory, Availability, Bandwidth, Benchmarking, Bind, Cabling, Cisco, DHCP, DNS, Ethernet, Fault isolation, FDDI, Frame Relay, General Directories, H.323, Hardware, Hewlett-Packard, Hubs, IPv4, IPv6, LDAP, Lotus Domino, Lucent, Microsoft Windows, MPLS, NetBIOS, Network applications management, Network management software, Network monitoring, Network protocols, Network testing, Networking, Networking services, NFS, Nortel, Performance management, Ping, Protocol analysis, Remote management, Routers, SIP, Switches, TCP, WINS

Remote Access Networking
I am not too good with networking, and I have a question. I need to be able to access two seperate computers at a remote location. There is DSL internet. Right now I just have one connected to the internet, and have everything forwarded to that specific IP address. The Remote Access program I use, [...]

Answer Question   |  January 21, 2011  1:47 PM
Cabling, DHCP, DNS, Hardware, Hubs, Networking, Networking services, Routers, Switches

Wake-On-LAN / Cisco Mac address-tables
Recently I scheduled my computers to power on using Wake-On-LAN. There seems to be an issue with some of the computers not turning on. All the computers have identical hardware and have the same BIOS settings. I did some investigation and I noticed that the computers that were not turning on did not have their [...]

Answer Question   |  January 17, 2007  12:16 PM
Cabling, Cisco, Desktops, Hardware, Hubs, Management, Microsoft Windows, Networking, OS, Routers, Security, Servers, SQL Server, Switches