• Will adding eATA interfere with my current RAID setup?

    I just go a new eATA 1.5 TB harddrive what i like to ad to my setup as data back up drive on board i have 4 eATA conections 2 are used for raid 0 this is the setup CybertronPC X-Cruiser SLI AMD Gaming PC – AMD Athlon 64 X2 5000+ 2.6GHz, 4GB DDR2-667, 2x250GB SATA II (RAID 0), DL DVD±RW, 2x...

    Webpanther5465 pointsBadges:
  • Part of program on external monitor

    How can I display my main program on the laptop monitor and results (for the public)on a external monitor in visual basic 2008?

    Sportsbuilder5 pointsBadges:
  • SDHC speed class confusion

    SDHC cards have 3 speed classifications; classes 2, 4 and 6 which correspond to write speeds of 2 4 and 6 Mb/sec. Why then are some SDHC cards rated as class 4 (or even 2) with write speeds greater than 6 Mb/sec. For example, Sandisc has class 4 cards with 15 Mb/sec rates called class 4 cards.

    Clballard5 pointsBadges:
  • 8GB DIMMS for AMD Shanghai?

    Any idead when 8GB DIMMS will be available for Shanghai processors?

    Gunslinger65 pointsBadges:
  • Setting up a wireless configuration

    I want to set up a wireless connection between 2 computer and want to know if I need a router if both computers are set up for wireless connections? If I do do I need to connect to the internet with the router? If so, can I do this using my cell phone as a modem? And lastly what is an access point?

    StephHouse5 pointsBadges:
  • SD to SDHC card reader

    Just purchased and Acer Aspire One Netbook. Love it. It sports 2 card readers, both SD card (up to 4gb)capable. I understand that the newest SD card readers are capable with a firmware upgrade handling the SDHC format. Windows tells me I have a "JMCR SD/MMC SCSI Disk Device". Can anyone help?...

    Pstrulm5 pointsBadges:
  • PCMCIA UNKNOWN_MANUFACTURER

    I have a SanDisk CompactFlash card that has been working in all of my laptops except for the newest one I just got. When I put the card in the new laptop it recognizes that a card has been inserted because the new hardware install dialog pops up but it can't find any drivers for it. When I go into...

    RoadDust390 pointsBadges:
  • Monitor does not display, power light keeps blinking

    When i start my computer, the CPU starts and with its LEDS on. the keyboard also have the LEDs blink once. but the moniter does not start up, the display light just keeps blinking. i dont get any display on the screen

    Mib19815 pointsBadges:
  • Issue related to shared resources

    I have one issue - In my office there are three scanners are working each scanner scanned couple of documents throughout a day. Scanned files are stored in a shared folder. I need to calculate how many scanned files each machine produced. Is there any counter software which gives me a net count of...

    Samatra10 pointsBadges:
  • Symbols on Zebra 170Xill

    Can the zebra print medical device label symbol for manufacturer?

    Jpatak10 pointsBadges:
  • What type of hardware needs for setup firewall

    can you give me the list of hardware needs to set up the firewall?

    Honesty5 pointsBadges:
  • how to enable paper tear in win xp

    i have a epson fx 80 printer driver installed. i have enabled paper tear option in the printer menu (the menu which comes when from the printer operation pannel). but paper tear is not functioning as it should, is there any software option in win xp to enable paper tear

    Rajaji197890 pointsBadges:
  • implication of upgrade in Hard drives to 72gb from 36gb on windows NT using RAID 5

    implication of upgrade in Hard drives to 72gb from 36gb on windows NT using RAID 5

    Stiv20 pointsBadges:
  • how to define custom page length in windows xp on a epson fx-80 printer

    i can define custom page length when i use a epson fx-80 printer driver on win98, but not on windows xp. how can i do it on win xp. my page length must be 3.50*1.50 inches with epson fx-80 printer installed in winxp

    Rajaji197890 pointsBadges:
  • Getting it all to work together – Network design

    l am setting up a very basic network but still need to be reassured, my network consists of all the following which should all be used 6 computers 24 port switch 24 port pathcpanel router modem one storage rack the only pice that has put me off is the patch panel as l honestly and embarrasingly...

    clivaldo10 pointsBadges:
  • Electronic Invoicing help

    input on best scanner/OCR to use for scanning invoices to FI in SAP

    Sheilah5 pointsBadges:
  • Programming Software for Mazak NTX-48 Champ

    I have a Mazak NTX-48 "Champ" laser cutter. We are currently using AutoCad 2004 and using "Auto Code" software to Generate Programs for the Mazak. We are planning on upgrading to AutoCAD 2009, but the company that created and supports Auto Code is no longer in existence. Does anyone any advice on...

    Flame14,925 pointsBadges:
  • AS/400 Relocation

    What steps should be taken for a smooth relocation of 9408-M25 i5/OS.

    Saba1235 pointsBadges:
  • Advice on buying new PC

    I have a Pentium 4 & need to upgrade. I teach Microsoft, use graphics in my manuals, & use CorelDraw a lot. I also design huge Excel spreadsheets with lots of formulas and design databases in Access - what would be a good PC processor, ram, etc? I have been quoted on a system with a Quadcor...

    Shazzie70 pointsBadges:
  • Server set up

    I am starting a company sending mp3 files to subscribers that have a Premier technologies Net 7000 continuous mp3 player. I wish this to be completely hands free to the subscriber and wish to update daily the mp3 content. My question is: Can I do this with a server of my own and if so, do you know...

    Nineteen585 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following