• How to setup wireless Internet access on 2 desktop PCs

    I have 2 desktop pc's in my home and I'm not sure what I need to get internet connection on both without running cables accross the floor. I have DSL through my phone company and I think I need 2 wireless cards and a router but I don't know what kind or if that's even correct.

    Rochellebarth15 pointsBadges:
  • Tracking Laptop Users

    Does anyone have a recommendation for a good software program to track internet content for lap top users when not connected to the network? Specifically, what software does the best tracking when the users connects back to the network.

    Gamrey5 pointsBadges:
  • High speed network connections between buildings that are 500-700 metres apart

    what is the best suitable network that supports high-speed connections between buildings that are 500-700 metres apart

    Salma1235 pointsBadges:
  • Customize Epson 9 pin with TRANSFORM(*NO)

    Greetings, is it possible to customize a Epson 9 pin connected to a PC with iSeries Access V5R4 with the TRANSFORM(*NO.)? I'm trying using a customization object (WSCST) and haven't had any positive results.

    AS400 - Ask the Expert485 pointsBadges:
  • #com v’s Cisco

    Hi, I am in the process of scaling up a Datacenter to handle what over the next 3 to 5 years is expected to be a doubling of the current workload. I am pushing my current stackable switches to the limit at peak times and the performance impact is very visible even to end users. I am managing a...

    Bouncybrit10 pointsBadges:
  • Efficiency differences between circuit switching and virtual switching

    Which is more efficient: circuit switching or virtual circuit switching and why?

    NetworkingATE1,545 pointsBadges:
  • Recommendation for handling wall phone plates in UTP cable installations

    In order to prevent a potential ground loop effect on F/UTP cable installations I usually avoid letting the metal shell of a shielded connector touch a metallic plate. What does Siemens AG recommend for wall phone plate installations when deploying an F/UTP cabled installation?

    NetworkingATE1,545 pointsBadges:
  • Laptop cannot detect home WLAN server

    I have two T42 laptops which connect to a Siemens Gigaset Wlan server. One has been used by my son at boarding school and the settings have probably been changed. It now does not see the home Wlan server any more, even so it still sees weaker servers in surrounding houses. The second T42 sees and...

    Wlannovice15 pointsBadges:
  • Will vender’s hardware revenues shrink as a result of virtualization?

    Since virtualization allows one server to replace several non-virtual servers one would think this would be bad for HP,Dell, IBM and other server vendors. Yet it doesn't seemed to have caused the stock of these vendors to go down. Is this because the new virtual servers will cost more and have a...

    Jim4522820 pointsBadges:
  • What will make an analog signal?

    Does the communication between two network interface cards (NICs) of a computer connected by a Cat 5 cable in a digital signal form or an analog signal?

    NetworkingATE1,545 pointsBadges:
  • Replacing motherboard

    hello i did something wrong in my bios an fried my chip ,however luckily i have an exact spare motherboard if i just throw it in will it all be ok or will i lose windows an data etc .thanx for any help reub ps i wont flash bios again

    Reubdogg5 pointsBadges:
  • Will adding eATA interfere with my current RAID setup?

    I just go a new eATA 1.5 TB harddrive what i like to ad to my setup as data back up drive on board i have 4 eATA conections 2 are used for raid 0 this is the setup CybertronPC X-Cruiser SLI AMD Gaming PC – AMD Athlon 64 X2 5000+ 2.6GHz, 4GB DDR2-667, 2x250GB SATA II (RAID 0), DL DVD±RW, 2x...

    Webpanther5465 pointsBadges:
  • Part of program on external monitor

    How can I display my main program on the laptop monitor and results (for the public)on a external monitor in visual basic 2008?

    Sportsbuilder5 pointsBadges:
  • SDHC speed class confusion

    SDHC cards have 3 speed classifications; classes 2, 4 and 6 which correspond to write speeds of 2 4 and 6 Mb/sec. Why then are some SDHC cards rated as class 4 (or even 2) with write speeds greater than 6 Mb/sec. For example, Sandisc has class 4 cards with 15 Mb/sec rates called class 4 cards.

    Clballard5 pointsBadges:
  • 8GB DIMMS for AMD Shanghai?

    Any idead when 8GB DIMMS will be available for Shanghai processors?

    Gunslinger65 pointsBadges:
  • Setting up a wireless configuration

    I want to set up a wireless connection between 2 computer and want to know if I need a router if both computers are set up for wireless connections? If I do do I need to connect to the internet with the router? If so, can I do this using my cell phone as a modem? And lastly what is an access point?

    StephHouse5 pointsBadges:
  • SD to SDHC card reader

    Just purchased and Acer Aspire One Netbook. Love it. It sports 2 card readers, both SD card (up to 4gb)capable. I understand that the newest SD card readers are capable with a firmware upgrade handling the SDHC format. Windows tells me I have a "JMCR SD/MMC SCSI Disk Device". Can anyone help?...

    Pstrulm5 pointsBadges:
  • PCMCIA UNKNOWN_MANUFACTURER

    I have a SanDisk CompactFlash card that has been working in all of my laptops except for the newest one I just got. When I put the card in the new laptop it recognizes that a card has been inserted because the new hardware install dialog pops up but it can't find any drivers for it. When I go into...

    RoadDust390 pointsBadges:
  • Monitor does not display, power light keeps blinking

    When i start my computer, the CPU starts and with its LEDS on. the keyboard also have the LEDs blink once. but the moniter does not start up, the display light just keeps blinking. i dont get any display on the screen

    Mib19815 pointsBadges:
  • Issue related to shared resources

    I have one issue - In my office there are three scanners are working each scanner scanned couple of documents throughout a day. Scanned files are stored in a shared folder. I need to calculate how many scanned files each machine produced. Is there any counter software which gives me a net count of...

    Samatra10 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following