1
  • Cat 6 crossover only getting 100 Mbps?

    So I'm trying to make a 1000 Mbps connection between two machines with gigabit ethernet ports. Problem is, even with cat 6 cable, my transfer rate is peaking at 12.8 MB/s (should peak at 128, yes?). It says in the connection status on both ends that the speed is 100 Mbps. Is there something I need...

    Flibitijibibo15 pointsBadges:
  • connecting the 5th and 7th floosr of a building

    Hi, Everybody My network covers the 5 th floor of an office building, and now we expanding to the 7th floor (a half-dozen users. All the servers and telecom closet are on the 5th floor and I have to provide network services to the users on the 7th floor. I would like to have the opunion of this...

    Senomango0 pointsBadges:
  • Who uses Gigabit Ethernet for IP Phones, is this just IT herd mentality?

    Looking at general VoiP deployment and IP telephones, I see a wide reference to Gigabit ethernet almost as if it is the standard interface. It is being specified in tender responses as a must have. Reality seems to indicate that Gigabit to the desktop is not standard and rarely used in enterprises...

    Etljnoy15 pointsBadges:
  • Running gigabit over cat5e?

    What happens if we run gigabit over cat5e? Will we get a connection? Is it reliable? What would be my max possible speed?

    NewnanIT1,110 pointsBadges:
  • Should we run gigabit to the desktop?

    Should we run gigabit to the desktop for computers transferring files (sub 500 MB) and accessing the Internet and MS Office 2010. It is severely more expensive would we gain speed or would it not be noticeable?

    Karl Gechlik9,860 pointsBadges:
  • Help setting up one machine as a backup

    I need to setup one machine to backup all others on my network. It will be grabbing approx. 500 GB of data across 12 machines. What is the best way to set this up? I have a GB network and all the machines stay on at night. I need to be able to restore a machine from complete failure and to another...

    ITKE342,450 pointsBadges:
  • Gigabit Ethernet only connecting at 100mb

    Have a Gigabyte GAIp1000 pro board running latest Intel Pro 1000 driver. Added new nic neither will connect at 1000 ony 100 mb on seperate switch any ideas?

    TomKnox40 pointsBadges:
  • Uploads bringing network down

    We do web design so the volume of traffic going out to our live production servers is considerably high at times. So my question is, without upgrading our hardware (see below), is there any way to stop uploads from bringing the entire network to its knees? I've got a small LAN that has between 30...

    Kaiserbeto0 pointsBadges:
  • Memory Allocation

    Hi Guys, I?m in a sticky situation here. I have a 3640 which hangs for a couple of minutes every night when there?s a scheduled backup going on the LAN(For a couple of minutes all my WAN links start bouncing) . Basically the traffic goes from one Ethernet to the other. When i initiate the ?sh...

    Tintin7770 pointsBadges:
  • Bandwidth Limit on Cisco 3550 catalyst switch on gigabit interface or using Access list on the router with ip address

    Dear friend, I have a cisco 3350 catalyst switch, I want to limit bandith on that interface to 64kbps, I need help on this. I need to know another way of limiting the bandwith using access list on the ip address assigned to the host on that interface. send your reply to : akeemogun@yahoo.com

    Bidemi0 pointsBadges:
  • bandwidth distribution

    hi all, can u tell me how isps distribute bandwidth to the customers(both dial up and leased)how to check that proper distribution is taking place and everyone is getting the correct bandwidth.is there any software that could b used to keep an eye?what else can be done?how to control??? thanks...

    Redrose0 pointsBadges:
  • bandwidth distribution-2

    hi all, can u tell me how isps distribute bandwidth to the customers(both dial up and leased)how to check that proper distribution is taking place and everyone is getting the correct bandwidth.is there any software that could b used to keep an eye?what else can be done?how to control??? thanks...

    Redrose0 pointsBadges:
  • Moving DNS outside

    We are moving DNS services outside and I would like to learn more about how to set this up. We currently have AD Integrated DNS server, Primary DNS server, and Secondary DNS servers set up in our AD domain. We have 2 Domain Controllers, one on Windows 2003 w/Exchange 2003 w/GC, and one Windows 2000...

    Jerryn35 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following