Configuring a Foundry Switch

Louann — Thu, 21 Aug 2008 23:10:38 +0000

I am not a Network Specialist, but I do know a small amount about configuring a CISCO switch. However, I have been asked to configure a Foundry Switch. I am having problems with a few commands and maybe someone out there can help me out. Here is what I’m getting when I try and configure this Foundry Switch.

version 12.0
no service pad [equivalent cmd not found]
service timestamps debug uptime [equivalent cmd not found]
service timestamps log uptime [equivalent cmd not found]
ip subnet-zero [equivalent cmd not found]
interface VLAN1
ip address 10.10.1.80 255.255.255.0
no ip directed-broadcast [no cmd available here]
no ip route-cache [no cmd available here]
config# vlan 1
config-vlan-1#ip-subnet 10.10.1.80 255.255.255.0
error: invalid subnet mask 255.255.255.0
line con 0 [equivalent cmd not found]
exec-timeout 0 0
password
login
transport input none
stopbits 1
line vty 0 4 [equivalent cmd not found]
password
login
line vty 5 15 [equivalent cmd not found]
password
login

Can someone point me in the right direction?

IT Answers » Foundry Switches

Configuring a Foundry Switch