• Routing the firewall IP in to the public IP

    In our company, we are using an VPN to connect Lotus Notes and other specific aplication to some servers.For security issues, we are using an proxy, and our public IP is routed to their firewall IP, and I can`t acces with Remote Desktop the workstations from our company.Should I rebuild the VPN...

    Sorin5 pointsBadges:
  • what is outside_cryptomap_dyn_20

    what is outside_cryptomap_dyn_20

    Ajwal5 pointsBadges:
  • Installation and updates

    Howdy folks, Tryin to keep things going around here....need some advice. I have Win2003 servers and Active Directory.....single domain....approx. 100 client computers.....one location. Am upgrading all computers from Office XP to Office 2003. My project: Install Office 2003 and all updates remotely...

    TheVyrys0 pointsBadges:
  • Trying to configure Outlook Web Access on my Exchange 2003 Server which is behind a Cisco PIX firewall.

    I have a question. I am trying to configure OWA on my Exchange 2003 Server which is behind a PIX firewall. I am told the OWA should work by default after I have installed the Exchange server. Mine isn't working. I just don't know if its the firewall or not?

    ITKE352,395 pointsBadges:
  • How can I test this at each workstation to see if port 25 traffic is actually being blocked

    This question was submitted on SearchExchange.com I have created rules in my firewall to block outgoing port 25 traffic from any computer except the email server. How can I test this at each workstation to see if port 25 traffic is actually being blocked? The firewall logs will show me blocked...

    ITKE352,395 pointsBadges:
  • Cisco ASA DMZ configuration…

    I am in the process of setting up a DMZ in order to host a Web Server and an Exchange Server. I have been doing a great deal of research and have a few questions. This is my setup: Internet====>ASA====>Inside Network (Cisco Switches) I want to use an additional switch and attach it to the ASA...

    Skepticals0 pointsBadges:
  • How to connect to my servers from behind customer firewall?

    I need to do some product demos connecting to my server. However many times the client firewall rules prevent me from accessing my server. My application needs access to multiple ports (apache, tomcat,oracle,..). Is there some VPN software I can install to resolve my problem? I would appreciate...

    Chennapan30 pointsBadges:
  • PIX Connectivity question

    Hey guys maybe I'm not understanding something here just want to make sure I'm thinking right. ok I have a pix, a 2821 and a 3845. The pix is configured and already has an insdie/outside interface. What I'm doing is going to add another inside interface on the pix and connect the 2821 to it and...

    Gurowar40 pointsBadges:
  • cisco pix route traffic through 2 interfaces

    Hi, I have a Cisco Pix which currently has an internal, dmz and outside interface. My outside is my default route, however I have now got another connection to the internet that I would like to route some outside bound traffic through. I can set up a static route to do this however will need the...

    Mawk100015 pointsBadges:
  • Cisco pix501 VPN at home.

    A question submitted on SearchNetworking.com I just got IPSEC passthru working. IPSEC passthru is the most important feature because from home I have to VPN back to ASA at work. I would also like when I'm at work to VPN back to my home (VPN the other way that terminates on my pix 501) This should...

    ITKE352,395 pointsBadges:
  • How to NAT a VPN pool address

    I have a PIX 506e IOS 6.3(5) and I want to make a VPN pool address available to inbound traffic. The scenario is that I have a wireless device which is behind a firewall from my provider. I have a VPN set up to allow the device to connect and it is assigned an address from a VPN pool. I would like...

    TomWahl85 pointsBadges:
  • Cisco PIX VPN – Configure IP access restriction

    We have a PIX successfully running VPN (I just inherited this network so I am not sure what all is here yet) and we want to restrict which external IPs can access VPN. What is the best method to do this? See my config below (With obvious parts removed or Xd out) PIX Version 6.3(3) interface...

    Samirise0 pointsBadges:
  • security problem

    Hello, I have small workgroup having 10 computers in my office. I do some personal work in office like using yahoo messenger, checking personal e-mails and some online banking site. But how does one of my senior knows it? I do everything lonely and securely so that nobody in the office knows it....

    BinooDas123410 pointsBadges:
  • SNTP setup

    I have setup the SNTP as a client and it times out. The firewall allows all outbound. Is there something special i need to setup to make SNTP to work?

    GaryRez25 pointsBadges:
  • Traffic monitoring on SUSE 10.1/Nagios

    I would like to monitor the bandwidth usage per IP address going through my firewall. I'm running SUSE 10.1 with Nagios installed. Anyone have an idea of how someone would go about doing that?

    Mrbartelby5 pointsBadges:
  • Symantec Anti Virus Corporate 8.0 issue

    Starting one WinXPSP2 (fully patched) computer last night revealed that the SAV Corporate 8.0 was not functioning properly (yellow "!" over systray icon). Restart of the computer did not resolve the issue. I cannot update (Live Update is disabled); I cannot uninstall (process appears to start and...

    Poppaman20 pointsBadges:
  • Firewall Router

    I have a Linksys Firewall router (BEFSX41) ? Does anyone know if this supports NAT-T. I have two users who need VPN but can't. Anyone know the settings required on the router?

    Ron11535 pointsBadges:
  • Firewall Service keeps on stopping…!!!

    We are using Windows 2000 Server and ISA 2004 server standard edition..!! I found virus and used Nod32 to clear it out. But after that I found that Firewall service keeps on stopping every time. I am getting following errors::: The Firewall service stopped because an application filter module...

    Atulam0 pointsBadges:
  • Anyone know the port used for the PIX 515e for the client connection?

    Anyone know the port used for the PIX 515e for the client connection. Need to open my firewall for the client to get out

    123456300 pointsBadges:
  • Want to establish a site to site VPN Tunnel

    We have 5 different locations with Sonicwall firewalls as described under. 1. WS Corp TZ190W 2. MM Corp TZ170 3. MT Corp TZ170 4. MT Datacenter TZ170 5. IN Corp TZ170 We want to establish a site-to-site VPN tunnel, is switching to MPLS VPN a right move? If not then what should be do ?

    JimmyIT1,725 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following