• VPN behind PIX firewall

    Hi, I have a PIX firewall and I am trying to make a vpn connection from client machine behind the firewall to a server in another site, with a public IP. I am getting error 800. need help please

    Sabusada5 pointsBadges:
  • Outlook web access needs to be accesible via the internet with Exchange 2007 and Outlook 2007

    Exchange 2007 running all roles on a single server and client running Outlook 2007. OWA is working fine on the LAN. I need to make OWA available from the Internet. We don't run ISA Server but do have a fully configurable firewall between the LAN and Internet. Any advice on how to set this up?

    ITKE350,405 pointsBadges:
  • Windows Server 2008 3rd party firewall

    I am looking to install a 3rd party firewall on my Windows Server 2008. Does anyone have suggestions? Thanks

    JimmyIT1,725 pointsBadges:
  • Configuring Netgear WGT624 Router with Acer Aspire Netbook

    Does anyone know how I could go about configuring my Netgear WGT624 router to work with my new Acer Aspire netbook? I currently have a laptop operating on my Netgear router, but yesterday, when I tried to log on to the internet with my Acer Aspire netbook, nothing? my router is secured. The funny...

    NYC5 pointsBadges:
  • Is there a way to disable Windows firewall without deactivating McAfee firewall?

    I’m currently running Windows XP Home Edition SP1. I’ve been using McAfee Internet Security Suite 6.0 for the past three years with SP1 and would like to switch to SP2. Will the two firewalls conflict? Is there a way to disable the Windows firewall without deactivating the McAfee firewall? Any...

    WindowsServerATE335 pointsBadges:
  • Switching ISPs and need help reconfiguring VPN and Firewall settings

    When switching from DSL to Cable Internet... when you have a router w/VPN & Firewall and a static IP - how do you switch the service? Obviously just plugging the new service provider in won't work. I know you need the log in and password to the router but after that?

    NetworkingATE1,545 pointsBadges:
  • How to disable the firewall through Group Policy

    How to disable the firewall in the domain machines through group policy console

    Vinsha25 pointsBadges:
  • Related to Firewall

    I have a firewall (watchGuard 55e Edge Box). I have config but user require the site is open that time is note open and intenet is going very slow. I have make the HTTP proxy all contents are allow. What the problem behind this. PLz. Give the solution. Thanks Reg... Raju Sharma...

    RajuITsolution5 pointsBadges:
  • career in security

    i am b.tech graduate 2008 passed out & am CCNA certified and i want to do another certification which is most useful in career PIX or FIREWALL or RHCE AM STILL SEARCHING FOR JOB please answer which is better career choice

    Vamsib410 pointsBadges:
  • What type of hardware needs for setup firewall

    can you give me the list of hardware needs to set up the firewall?

    Honesty5 pointsBadges:
  • Using switch or router ACL to block streaming traffic

    I would like to block streaming media requests using either the LAN switch or the site edge router. The site is on a private network and does not have a local firewall at the edge. Has anyone used Cisco ACL's for this purpose and if so, how did you do it? Or, would I be better implementing a...

    Labnuke9932,960 pointsBadges:
  • How to work two Linux gateway firewalls in a same network?

    How to work two linux gateway firewall in a same network? Would u tell me please.

    Kuchtohai5 pointsBadges:
  • Can I use only in side LAN card of proxy server if I am using a firewall for NAT

    Can I use only in side LAN card of proxy server if I am using a firewall for NAT

    Intrnetworking30 pointsBadges:
  • How do I set up the Cisco ASA 5505?

    I have a static ip address for the Modem and I believe that I set up the outside Vlan2 correctly with another ip address that i have for the ASA. The ip address that I have setup is 192.168.10.1/0 for the pc, and i have set this up as static also. So my question is what is the default gateway for...

    Levelheaded53685 pointsBadges:
  • hocan we install and configure pix 515E between proxy and modem

    I have to install and configure a pix 515E firewall between the internet and LAN. Our client have 2 Mbps internet connectivity and they have a public IP also. The modem is connected to switch. That switch is connected to the device called CYBERROAM, this device is using as a proxy server. The...

    Intrnetworking30 pointsBadges:
  • Exchange 2007 and ISA 2006 Firewall working with blackberry

    Is there any way to forward exchange 2007 email to a blackberry using Blackberry Internet Service through an Isa 2006 firewall

    Sstans10 pointsBadges:
  • Cisco PIX firewall 6 error messages

    I am using PIX version 6.0 and get the following error messages %PIX-1-103001: (Primary) No response from other firewall and %PIX-1-104002: (Primary) Switching to STNDBY

    JimmyIT1,725 pointsBadges:
  • WinXP Pro PC cannot ping Win2003 DC after Windows Firewall configuration.

    I have been fighting with this issue for 2 days and I am going crazy. We have 2 domain controllers, 1 on-site and 1 off-site as a backup. Last week I configured a windows firewall group policy object to open: file and printer sharing, remote access, disable remote desktop, open ICMP for the subnet,...

    erin0201215 pointsBadges:
  • Check Point Firewall-1 ica Service Detection

    This vulnerability showed up on our network during PCI scanning. This function is necessary for our VPN connectivity. How do we configure this issue to adhere to PCI compliance?

    Buffalowings5 pointsBadges:
  • Vista & AS/400 conflict

    I am having problems trying to access the internet on a PC running vista that is also used s an AS/400 terminal. Supposedly the IT guy at work says it can't be done and we will have to wipe vista off and install XP instead. the AS/400 is tied in to the LAN port and I am trying to access internet...

    Rktech5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following