• VPN on Netscreen SSG 550M

    Can someone provide assistance for setting up VPN connections (site to site and Remote access) on a Netscreen SSG 550? I've read all the docs, forumes etc, but not evenusing the Juniper VPN client will get me connected successfully. Thanks!

    JAR5 pointsBadges:
  • Do you use SonicWALL?

    How many of you use SonicWALL in your environment? What do you like about it? What do you think is missing?

    JennyMack4,280 pointsBadges:
  • cannot connect to PIX Firewall via ISA Proxy server using ASDM Launcher

    Need asistance with ISA rules to allow ASDM Launcher (from authorized workstations) to connect to the PIX Appliance for management purposes. I can connect directly to the PIX device via traditional "telnet" (using PuTTY)functionality but can't seem to figure out why ISA is not allowing the ASDM...

    RonP25 pointsBadges:
  • Protecting our internal network

    Hi Network engineers/ managers, I've been faced with a challenge on how to protect our internal network from threats outside with minimal cost, or none at all (at least for the software when using open source) Can anyone advise me what to use? Ive searched about, CISCO ASA, ISA 2003, SNORT,...

    JuneC155 pointsBadges:
  • Dos attack

    I have been receiving security alert messages from our firewall nearly everyday. e.g TCP Packet - Source:144.120.8.89,39341 Destination:192.168.1.1,25 - [DOS] TCP Packet - Source:210.7.0.36,3473 Destination:210.7.12.23,135 - [DOS] Thu, 2006-10-19 16:30:03 - UDP Packet -...

    92220990 pointsBadges:
  • Oracle remote login results in IPNAT.SYS error

    Attempts at remote login to Oracle database throws an IPNAT.SYS error. Is this a firewall issue with Windows Server 2003? Or is this Oracle configuration problem? What is the best secure way to handle an IPNAT.SYS error? Thank you. Moderator Note: This is a submitted question.

    BrentSheets6,925 pointsBadges:
  • Firewall report on individual users

    MY question is I am using Terminal Server to which 100 users are connected with particular IP address.Further the Terminal server is connected to firewall.Now the firewall gives reporting of websites that have been opened and amount of data downloaded.now i want the reporting should of individual...

    Omver5 pointsBadges:
  • Packet Filtering information required

    Hi, One of our PC which is running on REDHat is sending SMTP packets to the firewall. Though the firewall drops the packet, it logs the same. We wanted to know : 1. IF we have to run a packet capture tool, where do we run ? - on the firewall or the PC ? 2. We ran network monitoring tool, but did...

    Jagdish60 pointsBadges:
  • Spam firewall recommendations

    Looking for a spam firewall. We previously used SonicWall but looking at other options. Can anyone recommend alternatives. looking for something hardware based for around 200 employees but scalable. looking to spend under $4k

    JimmyIT1,725 pointsBadges:
  • How to configure Cisco PIX 525 to record SSH logon connections?

    Configuration PIX 525 ------------ Syslog Server Pix 525 running - 7.0 Pix logging trap has been set to informational Syslog Server - Aix 5.3 ssh logon is not being recorded in syslog All other activities are being logged in syslog

    Trinibree10 pointsBadges:
  • Pairing ISA server 06 as firewall and Cisco router 1841 with VLANs

    Hello IT managers, I'm faced with a challenging network set-up considering ISA 06 server, CISCO 1841 router, and Catalyst 3550 switch as key role players in the network. Anyone who could help me wth a valid and working configuration or advice. The scenario is: the ISA 06 will be facing the cloud...

    JuneC155 pointsBadges:
  • Sonicwall vs watchguard

    I saw one other question like this that was posted back in 2006 so I'm going to ask for more current thoughts. We are at the point where it will cost less to get a new UTM firewall with years subscription than it would to renew the non-UTM license on our sidewinder g2. I was wondering what peoples...

    Mtupker5 pointsBadges:
  • Linux Firewall settings

    HOW CAN I GIVE ACCESS TO A CLIENT (HAVING IP ADDRESS 192.168.12.62) TO A SERVER (IP:192.168.2.0) THROUGH LINUX FIREWALL PC (IP:192.168.110.219)? THE LINUX PC IS CONNECTED TO LAN HAVING IP:192.168.110.1-250. PLEASE NOTE THAT THE CLIENT (IP:192.168.12.62) IS IN ANOTHER LAN.

    ABDAREVA115 pointsBadges:
  • Wan design for 6 sites

    In this project i need to design a network for (SMG) that needs to set up 6 clinics on one WAN, allowing them to share same server for email, talk directly with doctors at other locations, on central network to access client information, they have a data exchange of 1.5MB/second at any given time,...

    Sofy5015 pointsBadges:
  • How come my outgoing is blocked. I have a WatchGuard.

    I have all outgoing allowed and still cannot ping outgoing ip address. the log states outgoing blocked. Am i missing something?

    JENWIT2NS5 pointsBadges:
  • How to add another Internet connection to a firewall

    I have a WatchGuard Firewall X15 and use connectivity for our offices. We have taken two 512 kbps Internet connections, because of a price issue from our ISP. We are only using one now. I would like to add another connection to my firewall. But this connection I want use for only HTTP traffic. Why?...

    NetworkingATE1,545 pointsBadges:
  • Disadvantages of installing ISA 2004 on DC

    hi all what is the disadvantege installing ISA2004 on DC ? and we have a router d-link for small office , we are thinking to install isa2004 , I know that isa must have 2 NIC 1 external 1 internal , the problem I thinkin that currently the public ip address is on the router , what ip address i have...

    MCSE69615 pointsBadges:
  • connecting to VPN using MS VPN Client

    Ok..i have a 1841 router with 12.4(19) and we use MS VPN client to connect to one of our clients. If i use from home, it works fine and a couple other sites it works fine, but at the office behind our 1841 router it doesn't. Talked to the clients firewall service providers and they said it uses GRE...

    Jasonmichel5 pointsBadges:
  • Windows Firewall client password

    Using windows vista.i have microsoft firewall client install for proxy server.I have forgotten the password to proxy.how can i recover it?

    Vije15 pointsBadges:
  • Routing VLANs to public IPs from Intranet through Fortigate firewall

    We have three virtual local area networks (VLANs) as follows: 1 data, 2 voice and 3 wireless. We have 6506e at the core, and interVLAN routing is working fine. The problem is implementing FortiGate firewall in transparent mode and terminating the ISP on the router with Ethernet output. I am not...

    NetworkingATE1,545 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following