Ethernet

Routing Between Subnets and between networks

1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected....

wireless vlan

hi all, is it possible to have one link from a switch to an access point and split the network into two networks a wireless network from the AP and a wired port for a user connected thru RJ45 and still keep it secured.

odd NIC problem

Howdy all... I have a win2k3 member server with 2 onboard Intel PRO lan connections. One is 100mb the other 1000mb. On the 100mb connection, I can set either a DHCP or Static TCP address and it works fine. On the 1000mb connection, it works fine on DHCP, but absolutely refuses to connect with a...

2 NIC's

SMS 2003 with 2 NIC's What would be the best way to configure and connect them using static IP? Can they be on different VLAN's? And what about Bridging them? Thanks

Two NIC's

SMS 2003 with 2 NIC's what would be the best way to connect and configure each NIC? Should or can they be on different VLAN's and what about bridging them? Thanks

802.11 vs 802.16

I have a small co. with a point to point wireless grid. I handle off site monitoring of gas nad oil flow. I have been overlaping my grid with new locations, and more to come. So I have been looking into new wireless Sys. I have made the choice to use All-In-One?360 Multi-Band/Multi-Mode Antenna...

Installation and updates

Howdy folks, Tryin to keep things going around here....need some advice. I have Win2003 servers and Active Directory.....single domain....approx. 100 client computers.....one location. Am upgrading all computers from Office XP to Office 2003. My project: Install Office 2003 and all updates...

Network Connection Freezes

For some reason, at random, among 20 PCs on my network, in the morning or during the day, the network connection stops responding for both intranet and internet communications. The only solution thus far is to remove the NIC from the Device Manager, reboot the PC, and let Windows XP Pro find the...

Routing to VLAN

I have setup a VLAN on a CISCO 3750 to our remote site and can communicate with PCs on both sides great. The problem arises when I want to route the remote site into our network to have access to servers and internet. I built a router to "route" the VLAN into our network but I have trouble...

Network Resource Allocation cum Planning cum Technical Problem

This is the real commercial problem face by my company. Well, the reason I ask this problem is I salute and respect all of you as I believe all of you are as good as network solution company out there, or even better!! Lets me rephrase the entire problem again. Company expand so fast that the...

route mail with fax service in sbs 2003

i have a sbs 2003 on my network and i configure him to get all the fax of my company, the only problem is that when i configure him to route all the incoming fax to some mail it does not seem to work, i check the event log and i get error 32083 and with this massage: Unable to route fax...

static ip is in the spam list

HELLO ALL, My static ip is in the spam list. What should I do? Thanks a lot

Networking

I have a question regarding domain identification of a computer. How does the domain determine the operating system of a computer on its network. Does it use the Registry or some other method?

g.729 3rd party VOIP on Cisco routers QoS - am I doing it right?

Hi, I am unsure about which configs are sufficient for implementing QoS on 2 2600 series routers over a 2MB serial link. On one side is the IP pbx and there are up to 6 IP phones plugged into a switch on the other side. We are using a non-cisco VoIP product using g.729. From what I can see all I...

Access point/router

I would really like to know the detailed difference between a router and an access point. Do I need access points if i am going to set up a network and have two routers already? How can i use a router as an access point if that's possible? Please explain. Thanks

wireless internet

I have a router connect to the internet and a directional outdoor antenna of range up to 8km. I have another router in another building about 200m away from the first. I actually want the set up and effective wireless network with the second router in that building. Can i connect the two routers...

Mac address to IP address resolution

How can we resolve IP address from Mac address and can we do this from Cisco switch 3750.? We are able to track port no and associated Mac address from Cisco switch by using the command <switch>#sh mac-address-table dyanamic>,but we also want to track the associated IP address with port...

Accesing Network resources on a WLAN

I created a small office network between five computers (a WLAN actually), four of which I installed from scratch. The fifth, which I didn't install the OS (Windows XP) myself, can be seen in the workgroup under Microsoft Windows Networks form other computer, but an attempt to access it fails, with...

Loadsharing between two ISPs

dear sir, I am looking for a load sharing solution between 2 leased lines for 2 different ISPs the diagram goes lke this: LAN-->Cisco Pix-->Router-->2 leased lines. can load-sharing be done at the router without extra configuration at the providers side? can CEF (cisco express forwarding)...

Remote Syslog with MySQL and PHP

Dear All, i want to set up a Remote Syslog with MySQL and PHP on system with whitebox linux,can some tell me a step by step on how to install and configure this,also the requirement needed to complete the task Regards Edwin