1
  • Need to detect Ethernet connections in C# using .Net 2

    I am developing software in C# using .NET 2 that needs to detect whether there is an Ethernet connection on a Windows machine, as the program will behave differently if accessed by Ethernet instead of WiFi.  The only thing I can think of doing is to use...

    ITKE350,790 pointsBadges:
  • Ethernet

    Why is there a propagation delay for maximum-extent Ethernet network is 28.8 μs

    ps25 pointsBadges:
  • Server disconnection on one but not the other

    I have two computers.  Both use the same ISP, the same modem/router. One can connect to a server (laptop) the other cannot (desktop).  Running ping and tracert queries on the desktop reveals that there is a serious lag on a hop.  When the tracert query is run on both computers simultaneously the...

    SMessiah5 pointsBadges:
  • Suggestions of training materials for CISCO 3560

    I am looking for training material that will help me in configuring a CISCO 3560 switch to be used for machine controllers. What I have is multiple PLC's on ethernet-IP. I need to be able to connect to each one and they are on different subnets. Any suggestions will be greatly appreciated.

    Tadams5 pointsBadges:
  • Running gigabit over cat5e?

    What happens if we run gigabit over cat5e? Will we get a connection? Is it reliable? What would be my max possible speed?

    NewnanIT1,110 pointsBadges:
  • HMC 7310 C05 has one physical ethernet port

    Hello There. I'm trying to connect to the outside world but my eth port is connected to my power 7 box. Is there a way to 'share or split' this port ? Either thru some kind of swithch or software that somehow would create a lan console ? I'm trying to make what I have work withoout spending extra...

    BBIIlizard20 pointsBadges:
  • Ethernet Cable Run Max Length

    What is the maximum cable length we can run from the switch to the desktop? What about from the patch panel to the switch to the desktop? Using cat 6? Is it different with cat 5 or 5e?

    Karl Gechlik9,860 pointsBadges:
  • What cable needs to be run for Ethernet?

    We want to run gigabit Ethernet. Should we use cat5e or cat6? What is the difference between the two? Should we pick one over the other?

    Karl Gechlik9,860 pointsBadges:
  • Figure out length of ethernet runs after the fact

    How can I asses how long my Ethernet runs are to the jacks at a users desk? Is there a software or hardware tool we can use to figure this out?

    Karl Gechlik9,860 pointsBadges:
  • Bridging or bonding ethernet & firewalls from separate carriers

    We have two 10 MBit internet connections. They are both Ethernet handoffs and enter two different sonicwall firewalls. Is there a way to bridge or bond these two separate lines? They are from two separate carriers and have separate IP ranges.

    Troubleshooter24755 pointsBadges:
  • Bonding and networking

    I am not a network guy and would like to know how can I setup the below two configurations and its pros and cons. networking component :- WAN: cisco 2970 * 1 Load balancer: F5 switch 1600 * 2 Private subnet: Cisco 2950 * 2 My situation is like that, my F5 switch 1600 will connect to Cisco 2970...

    Frankcheong10 pointsBadges:
  • how to use two gateway in single port

    [strong]I have a network with two routers with different IP addresses. One of the routers is for Internet access and the other makes a VPN connection to another location. [/strong] What should I do in order to allow a PC with Windows 2000/XP to access both locations (Internet and VPN) at the same...

    Manigandan5 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following