• AIX Error: B6267342, E86653C3

    Good day, May I know if anyone here knows how to solve our problem in one of our p servers? Here's what we've got in our errpt: B6267342 0725095414 P H hdisk36 DISK OPERATION ERROR E86653C3 0725095314 P H LVDD I/O ERROR DETECTED BY LVM B6267342 0725095314 P H hdisk36 DISK OPERATION ERROR B6267342...

    excellentrandy1,265 pointsBadges:
  • ActiveSync for Resource Mailbox

    Why can't I disable ActiveSync on resource mailboxes in Exchange 2010? I have tried through EMC and by running the PS command. Get the same error that this cannot be done on a resource type mailbox. Is there a workaround?

    Teri45 pointsBadges:
  • Avamar vs. TSM – an Avamar scale to a large enterprise datacenter environment?

    We're a large TSM shop. But we also have a large distributed environment where we've recently implemented EMC's Avamar backup solution.  We're now being asked to look at the TCO of replacing TSM with Avamar in our datacenter environment.  We're only looking at our VMware and NAS areas right...

    Phrikas10 pointsBadges:
  • Hyper V 2012 and EMC VNX Thin provisioning

    We have an issue with our EMC VNX attached Hyper V 2012 LUNs that are thin provisoned (thru the VNX). This provisioning works fine until you have to expand a LUN or migrate it. Then the LUN size baloons to the real (non-thin) size. Has anyone else seen this problem? Is there a solution? This is...

    turmanator5 pointsBadges:
  • What does EMC recommend as best RAID group for RAID 6, (8+2)?

    What do EMC recommend as best practices for number of disks in a raid group for RAID 6, (8+2) with SATA drives with A CX3 Clariion array?

    VIP095 pointsBadges:
  • Cannot get into EMC or ECS 2010

    I installed Exchange 2010 and that seemed to go with out a hitch now I cannot get into the EMC or the shell to setup the server. I want to uninstall the server and reinstall but I cannot because it is a bridgehead to an older Exchange 2003 environment. Without the EMC or ECS working, how can you...

    Dayj11745 pointsBadges:
  • Tracking DMX storage allocation

    How are you tracking your storage allocations from your DMX to your servers? We began with the Excel-based design workbook that EMC delivers at the end of the installation engagement & that works up to a point. I've written code that loads the info into SQL & does some reporting on it, but...

    SANManJax300 pointsBadges:
  • Is anyone using EMC’s Invista storage virtualization appliance?

    I've heard rumors that Invista is no longer being updated, but I was wondering if anyone's actually using it? Have any insight as to its pros/cons or alternatives if it's being phased out? Any info would be greatly appreciated!

    NewnanIT1,110 pointsBadges:
  • 4 TB storage suggestions required

    Hi, I am looking for the best product suggestions in EMC, NetApp and Hitachi for a basic entry level storage systems with 4 TB capacity. Kindly suggest the best and cost effective product for the requirement.

    Vjmatrixx10 pointsBadges:
  • EMC VNX interview question

    Hi all, I have to go for an EMC VNX interview after few days. Can somebody please let me know the question & answers.. use to ask in interview? Actually this is my first interview in EMC VNX. Thanks in advance.

    EMCVNX35 pointsBadges:
  • Powercheck removed a path from POWERMT display command

    After running POWERMT check command, it only displays one path. How can I fix the issue?

    09999999995 pointsBadges:
  • Random Storage Question

    Question 01 - like netapp operating system is DATAONTAP and it's file system is WAFL what about EMC products? and what about oracle ZFS uses which file system Question 02 - What are command set for fiber channel and fibber channel over Ethernet ? Question 03 - if someone talks about lost frame in a...

    storageareanetwork10120 pointsBadges:
  • How to remove a LUNs from ESX in one cluster where the same lun is attached with other cluster too.

    How to remove a LUNs from ESXi 4.1 in one cluster where the same lun is attached with other cluster too? When I removed the datastore from one cluster it give me the option to delete only and when I go ahead it get delete from all other cluters too.Please help to removal of LUNs and I need to...

    APAL5 pointsBadges:
  • Backup from EMC VNX and Restore on NetApp

    Hi I have a question. Can we backup data on tapes from EMC VNX and restore it on FAS series netapp filers? Thanks Tarun

    Yet5 pointsBadges:
  • storage

    Hi , I am mahesh.j a fresher , i would like build my carrier on storage .where i am familer to storage hardware now i would like expertise on it.My question is that how to be expertise on it, so i would request u all help me on it by ur guidlines. what are platform of operating system,application...

    Sjmahesh0 pointsBadges:
  • EMC PowerPath issue

    I have an an issue where PowerPath only displays one path even though 2 exhist. The san is showing both connections. Any suggestions

    ITKE352,565 pointsBadges:
  • Mix luns from 300 and 146gb drives when provisioning storage capacity

    We need to add capacity to our EMC DMX4 which currently has 146 and 300gb 15k drives.  The 146gb drives may be difficult to get so my questions is given todays technology with drive IOPS, should it be a concern if I need to expand the amount of disk to an existing host that currently has 146gb...

    Ldavis1005 pointsBadges:
  • EMC Certifications/Tracks

    Hi,  My job offered me training to transition into their storage group (EMC). I was looking at EMC certifications and wasn't sure which track/training to choose. I was hoping someone familair with the different tracks and the IT market could offer their expertise as to which track(s) were the best...

    Rileymartin5 pointsBadges:
  • Alternative to EMC VisualSRM?

    Could you kindly advise a competitive product against EMC VisualSRM Suite. I need to source for an alternative solution.

    JenH0 pointsBadges:
  • Symmetrix – choosing permanent or dynamic spare

    I have a permanent spare and dynamic spares are available in the symmetrix array when a disk is going to fail the data available in the failed disk will be copied to permanent or dynamic spare? How the disk choose whether the data has to be copied to permanent or dynamic spare?

    Bobbyzsss20 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following