1
  • Command router EIGRP

    In the command router eigrp 100, what does the value 100 represent?

    michaelsilue5 pointsBadges:
  • Reasons for using RIP instead of OSPF,EIGRP

    Now a days also why we are using RIP instead of OSPF,EIGRP.Any one knows means please tell me.

    yans112112290 pointsBadges:
  • Propagating vlan’s over a eigrp?

    Hello, I have 2 switches - one in building X and the other in building Y. The buildings are connected via fiber and eigrp is the protocol that's setup between them. The buildings are p2p connections between 7200's. I need the Vlans to be propagated from switch "y" to switch "x" over the L3...

    Dialerstring5 pointsBadges:
  • Cisco 3750 – EIGRP not on common subnet problen

    I'm getting lots of messages on a router IGRP-IPv4:(50)(Default-IP-Routing-Table:50): Neighbor 10.13.1.251 not on common subnet for Vlan11 i tried to ping but 10.13.1.251 doesnt respond show ip route shows 10.13.1.251 is directly connected on Vlan1. This must be off one of the trunk ports but how...

    Jlymn40 pointsBadges:
  • regarding Network

    How can i do practise of all levels if network practicals like ospf, eigrp and bgp, isis, hsrp etc.   I neeed link where i can i get best webside so i cam guide my self.

    Virendra45635 pointsBadges:
  • hub and spoke using EIGRP

    I cant ping from one spoke to another, split-horizon has been disabled, any suggestions???

    Rayb5315 pointsBadges:
  • When do I use RIP, EIGRP, IGRP AND OSPF?

    When do I use RIP, EIGRP, IGRP AND OSPF?

    NetworkingATE1,545 pointsBadges:
  • Tricky EIGRP routing quesiton

    Hello Sudhanshu, I have a bit of a tricky question that I've been wondering about. I'm going to be setting up over a dozen new ASA5510s in front of preexisting 2821 routers. I currently have EIGRP running in GRE tunnels between the sites. I have heard that the ASAs do not support GRE tunnels...yet...

    Richardvoyageur40 pointsBadges:
  • Connecting 2, 3 or 4 sites over MPLS

    Hi. I have some routing experience but I don't have much experience routing over a service providers MPLS network and had some questions.. Say I had 3 sites in different cities. I want to be able to route my data traffice to each site. I would like to use a MPLS provider. Does the provider hand-off...

    ChicagoTechie5 pointsBadges:
  • Router configuration – Invalid input message configuring EIGRP

    I enter the following command to configure eigrp using a wildcard mask, and I get the output "invalid input detected at" under the first character of the wildcard mask. This same command works on all other routers in the network. The command seems correct? Why this router? R2(config)#router eigrp...

    Ytechie5 pointsBadges:
  • About routing protocol

    Hi Engineers my name is vinod, i would like to no routing protocols ,like how rip,igrp,eigrp,ospf and bgp works and what is advantage and disadvantage of this protocols, specifically what is route poisening. i will appreciate for any kind of answer and any attachment or links will also help me....

    Hacky5 pointsBadges:
  • Configuring Multiple Internet Access Points

    We currently have a hub and spoke topology where all nine remote sites come back to HQ for Internet and server access. We have one site that uses about 60% of out Internet bandwidth, so we decided to drop a dedicated T1 Internet line at this site for this site's use only - all other sites will...

    Pooled0 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following