• Cisco Router 2800 series step by step configuration using DSL

    Can you please provide me step by step configuration how to connect/use DSL connection for Cisco Router 2800 series. I want to use DSL as backup in case T1 is down.

    Erwin5 pointsBadges:
  • Pretty strange problem in my network

    Hi Everyone, I have a client who has 10 computers . He also have 10 ADSL connections for internet connectivity (all from single ISP). We want to setup the environment in the following way: we have 2 D-Link simple switches with 24 ports. What we wanted to do is to connect all ADSL modems to one...

    Aligator0075 pointsBadges:
  • Engineering a Backup Solution?

    *** Fairly long *** I work for a hosting company and we set tunnels up for our clients. The client connects to us, and we host AD and Exchange for them, among other things. I have one client that has about 5 locations. Four of the locations are on a metro ethernet connection to their corporate...

    John.blakley5 pointsBadges:
  • DSL service to 2811 router

    Can a DSL service provide voice to Cisco 7961 phones through a 2811 router?

    DGJ5 pointsBadges:
  • AT&T DSL statistics

    What test results are considered excellent good or poor on a 9000 feet all copper average gauge 24?

    JJ257510 pointsBadges:
  • MPLS VS. DSL VPN

    Hi Everyone ,I wonder if i decide to implement MPLS (Layer2 or Layer3) to my WAN network. How do i know that I get a real MPLS in provider cloud not a DSL VPN instead ?

    Mheezaa5 pointsBadges:
  • How to configure two Cisco 2600 routers

    Hi, we have two Cisco 2600 routers, one deployed in our main office and the other in our remote site. We also have two DSL connections. We have our Exchange server in main office. Q1. How to configure the two router to use the 2 DSL connections that we have? Q2. How to route our exchange server to...

    Killerj5 pointsBadges:
  • does not detect local IP address.

    I have Asus A55A Series laptop. It has core i3, 4 GB ram, windows 7 64 bit. I have DSL connection. Every driver of every device is properly installed. when I connect LAN cable or connect laptop via WiFi. It detects the network and connects after WiFi password but It does not detect the default...

    Xaphar220 pointsBadges:
  • problem with sharing internet in wireless network using dsl-2640u

    Hi I have D-Link dsl-2640u modem.i've connected it to my pc with cable and i can access internet but i can't access internet in wireless network.i've tried to connet with a notebook wireless I don't know what to do! help me please.

    Rapfreak5 pointsBadges:
  • Windows XP slow in DSL environment

    ie slow in DSL environment

    valmsmith870 pointsBadges:
  • For VPN’s, which is better…Cable or DSL?

    I telework for my company and I use a VPN to connect to the company's server. I also use an Avaya Softphone to speak with consumers. While I am speaking with the consumers, I am using a Siebel program to input and research data. My connections drops a lot and my Siebel sessions freeze a lot as...

    Vrthomas10 pointsBadges:
  • VPN Routing

    If you have 2 vpn routers with 3 connections each (fibre, t1, dsl) and define a vpn connection between them using the fibre connection will any of the vpn packets be transmitted over the t1 or dsl lines? Doesn't make any sense that they would but have network engineer insisting that would be the...

    Jimkski5 pointsBadges:
  • Can 2 dsl units be connected through separate switches and 2 NIC’s work?

    I have a Dell 3G processor and 512k mem, using windows 2003 server and two NIC's one 24ch sw for all clients, one dsl for internet connection. Question: can 2 dsl units be connected thru seperate switches and 2 NIC's work?

    Nc951235 pointsBadges:
  • How to Reconfigure LAN After Move from DSL to T1

    Our 2003 installed network uses DSL since 2003. We have several IP in use for different servers running in our network since 2003. Now this ISP upgrades us to T1. A new T1 modem is installed, with a new set of IP, Subnet, Gateway, DNS 1 & 2 data for T1. We are told that we have to reconfigure...

    Beston225 pointsBadges:
  • Peer to peer network configuration, DSL Modem/Bridge/2 WAP’s

    Need help with a peer to peer network for a non-profit that has an Actiontec M1000 connected to their DSL line.  Usage is light, no more than 4 or 5 concurrent users. The building is long (>100 ft) and I need to have a WAP utilizing the wired ports on the east end with a WAP only at the...

    Stevesinboise5 pointsBadges:
  • handling time for telecommunications voice services and dsl

    What is the acceptable handling time for telecommunications voice services and dsl?

    Bernadine10 pointsBadges:
  • 2 dhcp server 1 dsl router

    Hello, how can I setup 2 dhcp server with switch each and 1 dsl router and both can get internet connections

    Rukiee5 pointsBadges:
  • multiple lans, subnets, dsl connections on the same cables

    well this is my first post and its a doosie. At lewast for me. Looking for an all wise network guru!! =] we had an existing network consisting of 10pc's, a win2k server and a dsl connection. all was fine... dsl router:192.168.0.1 server: 192.168.0.10, 192.168.0.50 easy as pie... now we are partners...

    Jabooma15 pointsBadges:
  • Fixed Wireless Broadband vs DSL?

    We are looking at internet services in my area and the only two we can get are Fixed Wireless Broadband and DSL. I am wondering how Fixed Wireless broadband compares to dsl and cable. Pros and Cons

    Scurio5 pointsBadges:
  • Connect branch office with main office via E1

    i have E1 with procurve HP router 7102 dl in the main office. and i ahave DSL with VPN router at the branch office. i need to configure the main office router to accept the connection fro the branch office

    Samio9115 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following