• “Display information about previous logons during user logon” Policy locks me out of Domain Controller

    I just enabled a policy (domain wide) on my Windows 2008 server (sole domain controller) to "Display information about previous logons during user logon" Since doing so, I was unable to log back in to my server! I received this message:“Security policies on this computer are set to display...

    Denwood390 pointsBadges:
  • network problem

    i have 60 systems in lan with domain controller of w2003 along with netgear router with defaulty gateway 192.168.1.1 all are pinging with default gateway but some systems are not able to connect default gateway and to some specific ip ip 192.168.1.10 but these systems are working with domain...

    Bluesoft265 pointsBadges:
  • controller E1 status mode to :reset

      Hello guys, we have at our company a controller E1 with problems in one of the cards port, when we do show ip int brief, one of the subinterface status mode display "reset" and protocol "down", i tried to research on the internet but i can not find the answer for the issue...and guys i can not...

    Zakk40 pointsBadges:
  • Windows server 2003 domain controller installation

    I,d like to install window server 2003 enterper on a system it,s configration - processor core tm 2dual 2.80Ghz, Ram 1GB, HDD 160 gb my question is how many user logno this configration(domain)  

    Bbb845 pointsBadges:
  • Windows Server 2003 R2 SP2 Domain Controller Group Policy registry change

    Windows 2003 Server R2 SP2 Domain Controller is used to deploy software installation package to WinXP clients in TEST AD group. Software distribution loads perfectly but a necessary registry change does not take. Used Reg2ADM.exe to produce 2 registry keys from an existing XP client. No errors show...

    ITKE334,795 pointsBadges:
  • Windows Server 2008 Domain controller adprep error message

    I am running Windows Server 2008 Domain Controller. I am trying to run a “adprep /rodcprep” command, but get the following error message. “Adprep could not contact a replica for partition DC=DomainDnsZones"

    ITKE334,795 pointsBadges:
  • Force logon to domain controller windows server 2003

    Is it possible to force logon to the same domain controller each time?

    ITKE334,795 pointsBadges:
  • The error was: “DNS name does not exist.”(error code 0x0000232B RCODE_NAME_ERROR)

    Hi. I have domain controller domain controller bdomain.dm. IP address for this domain controller is 10.10.1.15. My computer IP is 10.10.1.192. I can join to bdomain.dm domain in my wokrplase. Our company have branch. In this branch IP address is 10.10.4.4. head officce and branchec conectted with...

    Eliyevelxan1,235 pointsBadges:
  • Windows Server 2003

    i have a sever 2 G.B ram ,prosser Intel Xeon 3.0Ghz, i want to configare a domain controllar with using sql application server on that server i want to configare it domain along with sql application server . IS this configaration enough for both server or i needed to  improve configration ....

    Bbb845 pointsBadges:
  • Windows Server 2008 with VMware Domain Controller migration

    I am currently upgrading our network with a windows server 2008 and VMware. I have 2 Domin Controllers. Server09 and Server11. Server09 is also the DHCP server. I want to move the Domain Control off Server11 and Server09 to the new Server 2008 My Question is if the new server 2008 is attached too...

    ITKE334,795 pointsBadges:
  • Server/Domain Controller MMC snap-ins

    I'm not an Admin by any means, but I tinker all the time and got tired of searching for the MMC snap-ins.  So I wrote my own program that consolidates about 90% of stuff Admins might use, however, I think my Server/Domain .msc files are out of date, started this program years ago. Might I impose...

    Herbie64325 pointsBadges:
  • Active Directory and VMWare

    I installed VMware on the server which is running AD (domain Controller), for some new applications eg.HRIS.But the clients who are using this client software are being affected.Everytime their accounts are locked out what could be the problem could it be the VMware affecting it.It started when i...

    Mubs110 pointsBadges:
  • new exchange server

    At the moment I have a DC with windows 2000 an exchange 2003 on it. I want to seperate exchange from the DC on an new server. What is the best way to do ?

    Tomtom315 pointsBadges:
  • Demote child domain Windows Server 2003

    I have a single Windows server 2003 SP2 AD forest with two DCs  Along with that, we have four remote sites.  Each of these remote sites has a local DC (W2K3 SP2) configure as a child domain.  One of the remote site  was shut down.  We are now asked to remove the child DC from Parent AD.  We...

    ITKE334,795 pointsBadges:
  • Subnets for Exchange 2010 and Domain Controllers

    Is there security advantage of having domain controllers on different subnet from member servers hosting Exchange 2010 (MBX, CAS, HUB)? Or due to number of required ports to be open the firewall essentially becomes a "swiss cheese".

    Thomas199125 pointsBadges:
  • If my main DC crashes how can I change my additional DC to the main DC?

    I have two domain controllers, a main domain controller and one additional domain controller with Active Directory running on Windows 2000. My question is if my main DC crashes how can I change the additional DC to the main DC? And do I have to change the Server name?

    WindowsServerATE335 pointsBadges:
  • Domain Controller in Windows Server 2003

    Hi, Pls I have a challenge with my Domain Controller. Recently, the DC just lock-out users' accounts ndiscriminately (i mean a user log-on today and wake up tommorrow and the account is locked out). I have to unlock users' account almost everyday. Pls what is responsible for this and what can I do?...

    Abibam0110 pointsBadges:
  • Adding Windows Server 2008 to Windows Server 2003 Domain

    Is it possible to add Windows sevrer 2008 as a member server to a windows server 2003 domain with windows server 2003 DC

    ITKE334,795 pointsBadges:
  • doesn’t work block policy inheritance on OU domain controller

    hi all I applied some policy under administrative tamplates on domain level , however applied same policies to OU domain controller , even checked block policy inheritance any suggestion                                                       ...

    MCSE69615 pointsBadges:
  • Adding a Second Domain Controller

    Is there a best set of steps to add a second Win 2003 domain controller to my network?  Our current DC is a virtual Win 2003 Std server on a Win 2003 host.  I know that studying the Microsoft documentation is good, but I wondered if there is a quick step guide or something to shorten the learning...

    Daveparv5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following