• WIRELESS BRIDGES

    Dear Sir's, I have two wireless bridges. Master and Slave which are 800 ft apart and two high gain antennas are attached to these units. I am finding a disconnection problem with these bridges. It works for a while but gets disconnected and after doing powercycle on the slave end the bridge starts...

    Breathe0 pointsBadges:
  • Windows Server 2003 Terminal services

    I am configuring a server to be used as a file server for a small office. The server will be housed off-site and will need to be accessed remotely by 3 users. Is terminal services the best remote access solution in this case? If so can the server also handle licensing or is that necessary? I am new...

    Stuntz0 pointsBadges:
  • Remote Syslog with MySQL and PHP

    Dear All, i want to set up a Remote Syslog with MySQL and PHP on system with whitebox linux,can some tell me a step by step on how to install and configure this,also the requirement needed to complete the task Regards Edwin

    Eduado0 pointsBadges:
  • How To Make A LAN In My House HELP!!!

    currently i have 2 computers and i am using ADSL can anyone teach me hw to make a LAN in my house pls tell me fully THANKS THANKS THANKS

    ITNoob0 pointsBadges:
  • Remore RS232 Control

    Good Day All I wondered if anyone knows how to remotely access and control RS23 devices. I will give you my example. I have a PC which is attached to 2 RS232 devices. I would like to have some form of control of the devices attached to the PC from a remote location, like a PC in another room or...

    Jondean0 pointsBadges:
  • Transferring a Domain

    Hi All, I have a server running on WindowsNT 4.0, we are upgrading to server 2003 on new machine and removing the old machine entirely from network, Could any body tell is there any way of transferring the exisiting users and policies/ entire domain setting to new machine as it is, and not making...

    Inamhaque15 pointsBadges:
  • dns problems

    I have a DC with Exchange 2003 on Server 2003. I am having some DNS problems which I belive is causing Outlook to Exchange connectivity issues. I understand that there should be a DNS entry _ldap._tcp.dc._mcdcs in the DNS. I did not have this and I tried to manually add it. I have it in the forward...

    Amcdowell0 pointsBadges:
  • bootp and virtual hostnames

    I'm receiving a bootp request from a client machine on my bootp server. My server is not responding, and I think the problem is the that request is being sent to the hostname of the virtual IP (hostname_vip found in /etc/hostname.ce1:1 file). I see the name for the destination in the request...

    Gabercrombie0 pointsBadges:
  • Stop bit problem: USB to Serial Converter attached to motion controller, unable to set for 7-E-2

    I have three different USB to Serial converters, one of them an isolated converter from B&B. One brand of motion controller I work on uses EVEN parity / 7 data bits / 2 stop bits as its default. I find that none of my converters will work on the controller in this configuration. If I borrow a PC...

    Kfink040 pointsBadges:
  • AOL Spammer IP Identification

    Concerning the ever increasing amount of received spam, to battle this I have a program with which I can extract the IP address from the sender for reporting purposes, however, I have been receiving an increasing amount from AOL proxy server for which I cannot aquire the senders IP address. Is...

    Eyecatcher550 pointsBadges:
  • Upgrade step from win nt and win 2000 to win 2003

    I have windowsNT and window 2000 servers with active directory which i want to upgrade to windows 2003,all servers meet requirement for new vesion.Now can same help me on how to upgrade?what steps should i take

    Eduado0 pointsBadges:
  • ADI DNS

    Does anyone know how to get ADI DNS to show the partitions ForestDNSZones and DomainDNSZones? If i look with ADSIedit they are listed but they do not appear in dns MANAGER and I can can not set zone transfers to any dns server. DNS otherwise appears to be working fine on the three DNS ADI Domain...

    Brutusbrighteyes0 pointsBadges:
  • Implementing an Exchange server in VB6.

    I am done with emplementing a LAN exchange server in VB6, now i would like to consider making it work world wide.. Can anyone please advise with the defrences between a LAN and a server that work World wide in a programmers point of view, and how can i implement that using VB 6? many thanks for...

    Sswar1110 pointsBadges:
  • Router

    Hi all, I have two networks: Net1: 192.9.200.x net2: 10.10.10.x I medical images being processed in the 192 network but now we want to start sending those images over to the 10 network. I need a recommendation on a solution to route images between these 2 networks. I have seen where people are...

    YardDon0 pointsBadges:
  • “Controled” proxy

    Hi, I need to control my user's access to different sites. for example user1 should be able to access www.yahoo.com on providing username/password, where user2 should be denied (or get password from Admin... :-) ), in otherwords the software can keep the profiles of different user to access my...

    Manije0 pointsBadges:
  • Blocking File Transfers from MSN Messenger

    hi is there a way to block file transfers from MSN Messenger? or is there a software without the capability to transfer files but which can enable MSN messaging. thnx

    Aftabn0 pointsBadges:
  • RDP connection is not the correct computer

    Thanks in advance for any help! Im in a mixed 20002003 domain. When I RDP by name into several machines (all XP machines) in my building it is not the PC that I think it is. I check the actual PC name and its not the one I used to RDP into it, therefore not the machine I wantthink im looking at. Im...

    Kellarm0 pointsBadges:
  • DNS Old NT network

    I have an old NT network with a DNS server on a W2Kserver. The DNS server was never installed correctly and I do not know that much about it. Also, it is in very bad shape and I am afraid to do too much to it. I have two locations connect over Frame relay. One location has the NT domain controllers...

    Jtennyson0 pointsBadges:
  • PDC

    Hi, My event viewer keeps throwing me the event id 16650 source SAM. I have read up on the net about the possibilities of the error but am but am confused. I have two servers which i will call server01 n server02. server01 is suppose to be the domain controller(though it seems as though its...

    PRINCESS85 pointsBadges:
  • Restricted Groups

    Hi Guys I have a query regarding the usage of restricted group in a domain enviroment. Could some pls explain the steps required to add Domain Administrator Account to the Local Administrators Groups of a node. I know this can be done but m not sure bout the steps. Please HELP!!!! Thanks Guys Asta...

    MithunMCSE0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following