• Wake on LAN / Magic Packet broadcast doesnt work through PPTP

    Hi, I have a network, where I want to use WOL from a remote PC. It works when I send a packet from inside the network (or on the server). If I connect via PPTP from a remote Windows XP PC, I can't wake up the PC on the LAN. I suspect the broadcast packet doesn't reach the LAN. The PPTP connection...

    Benbje0 pointsBadges:
  • Creating a domain and DNS question

    Hello, my company is on Netware 5.1 and we are planning to remove netware entirely and move to Microsoft Server 2003. We have two sites: One in LA and one in SLC. There is connectivity between the two and both are on separate subnets. Out goal is to put the company on a domain. Right now in SLC...

    Natethegreat0 pointsBadges:
  • DNS Server change effect on oracle connections

    Hello, There is going to be a change in DNS server at our site. Also, there is going to be migration from Static to DHCP IP, but it has been assured to us that IP address will not change. All our databases are accessed via DNS alias entries in TNSNAMES.ora. Will a change in DNS server affect the...

    Garimapawa5 pointsBadges:
  • Workgroup problems of server 2003

    I have a network of 10 computers: 9 Win XP & 1 server 2003 . I have enabled NAT on server 2003 for the purpose of sharing the Internet on all computers. The Internet is running well but all the computers can't access the server 2k3 machine from the workgroup and all the other computers are...

    Hakimi0 pointsBadges:
  • Monitor Internet bandwidth

    Good day, We are using Windows 2000 Small Business Server in our organization with Exchange, DNS and ISA server configured. 1. I want to monitor the internet usage by the users. 2. I want to take a report on monthly or daily basis how much MB/GB utilized by each user. Thanks for your reply in...

    GiriPrasad0 pointsBadges:
  • Different scopes in DHCP

    I have different scopes in DHCP. How can I split into to two ethernet cards?

    Tvs0 pointsBadges:
  • Drawback of DHCP

    What is the drawback of DHCP?

    Rajpandey130 pointsBadges:
  • Save log view in Event Viewer

    Howdy folks, If I create a new log view in event viewer and filter the results, is there any way to save this view? Every time I close event viewer I have to re-create it. Probably just MS by design.... Is there any way to script it?

    TheVyrys0 pointsBadges:
  • Windows 2012 DHCP issue

    I had migrated from Windows 2008 server to Windows 2012 server recently. Windows 2008 server was the DHCP server and I transferred the same to new 2012 server. But 2012 server was not leasing the IP's. I then noticed the events like 1046 and 1056 in 2012 server and gave DNS credentials commands. I...

    kunelluvai5 pointsBadges:
  • LAN connectivity problem with Compaq notebook

    I have a Compaq EVO n1020v notebook. This works fine in our office LAN and sometimes it does not at all. Office LAN is a workgroup with ICS enabled in win 2K server. If I check the IP of the notebook it shows the IP of the LAN but never connects to the internet, can't access LAN...

    BinooDas123410 pointsBadges:
  • Drive letter issue in 2003 terminal server application

    I have a situation where I have a terminal server with a C and D drive with all user related stuff on D & all system related & boot is C. I need to install a new application which requires each user to map drive letter C to a network folder on another server. Apparently, there's no way...

    Netguru0 pointsBadges:
  • Event View Error Message

    Hi, I just started learning about Exchange Server 2003, and I have no idea what those error (warning) messages are. Most of these messages are the messages I receive everyday. Please look at it and give me some solution. Verify that the Microsoft Exchange MTA service has started. Consecutive...

    AnswerAll0 pointsBadges:
  • VLAN basics step by step

    Currently have a Windows 2003 environment using DHCP with Cisco switches in a single subnet with no VLANs. I want to take the Layer 3 switch and Layer 2 switches and configure it all with 4 VLANs. (Servers, users, printers, guests). My users will need to access the servers (file, e-mail, etc..) so...

    kevins742035 pointsBadges:
  • What is the command in CentOS 5.0 to configure DNS?

    Hi, I want to configure DNS and DHCP in Centos 5.0. Could anyone let me know how to configure it through command line?

    SaadKhan15 pointsBadges:
  • Multiple DHCP Scopes for multiple VLANS

    I am using Windows Server 2003 as a DHCP server. I would like to have centralized DHCP management using the one server to give out addresses to each of the 3 VLANS. We are also using Cisco switches and I planned on using the dchp-helper to allow the DHCP packets to be forwareded to the server. I...

    Skepticals0 pointsBadges:
  • Chaning subnet scope in DHCP for wireless connections

    Hi, How can I make that users on the wireless network gets a different subnet scope 10.0.3.x/24 while people who have wired connections gets 10.0.1.x/24 addresses currently all clients and routers are on the same switch and has same gateway and all of them in the same subnet scope 10.0.1.1-255/24

    mariusbui915 pointsBadges:
  • How to run a Wi-Fi router without NAT and DHCP

    I need a Wi-Fi router that acts more like a hub. I have a network setup with DHCP server, gateway, etc. I also have a typical Wi-Fi router. The problem is the Wi-Fi router does NAT. It has its own DHCP server and on my network every Wi-Fi connected device has the IP of the Wi-fi router. Is there a...

    bing135120 pointsBadges:
  • DHCP Address Conflict Issue

    Dear Sir, I am Zahid Bhatti from an IT department, I have 2 DSL modem 1st is connected in wired network switch through my computer(Server)enable simple network card sharing,so they can use internet and printer devices over the network every thing was working fine,after I decided to connect a...

    792pakistan5 pointsBadges:
  • Networking

    Can I start up an internet cafe but try to ignore a router but instead use a modem and a switch. and if it can be possible, what can I use as my DHCP server

    ronville20 pointsBadges:
  • Windows Server 2003 forced to DHCP

    Does anyone know a way to force a workstation to use a specific DHCP server ? We have a windows server 2003 has DHCP active as well as our phone system. The problem is there are workstations getting there ip info from the phone system and not the server.

    ITKE352,580 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following