• How to confgure VLAN with DHCP?

    I need to configure VLAN for blade center. I need the VLAN to give IP to all the nodes on the blade center. What are the commands to configure the VLAN with DHCP for the blade?

    DHCPVLAN5 pointsBadges:
  • configure DHCP over VLAN’s windows server 2003

    My question is how to configure DHCP over VLAN's. At present in my company DHCP is running without any VLAN's setup but know as our network extend and also for the security reasons i want to implement VLAN's in the switch. Then what about my DHCP how it works, what is the configuration requirement...

    ITKE350,300 pointsBadges:
  • How does DHCP service start?

    I have Windows XP with SP3. When I check the service DHCP. It is automatic but stopped. When I start the service. It doesn't. It shows error. "Could not start the DHCP Client service on Local Computer. Error 1068: The Dependency service or group failed to start." Please help.

    Xaphar220 pointsBadges:
  • DHCP by Windows Server 2008 between VLANS

    Hi, I'd like to know how to configure DHCP info to be passed through multiple VLANS to issue addresses to respective clients in all subnets. Right now I am thinking I need to have all proper scopes defined on the dhcp and i would also put the server (which is the AD) in the management VLAN which...

    OrlandoD5 pointsBadges:
  • Technical College vs. University

    Hello all- Would it be more beneficial to attend a technical college or university? A certain technical college, ECPI (www.ecpi.edu) in VA, has sparked my interest because they advertise 'they meet with some industry experts to discuss tech trends and what education needs to be put out to keep up...

    NeoCentric0 pointsBadges:
  • Two domains, two dhcp servers (help with subnet)

    Hi all, I am having some trouble and I can't get forward... I have two different domains running, both are in the same network. (Scenario is that DC1 is the primary domain of an existing company and DC2 is a new domain for a new company) The DC1 of Domain1 has the ip 10.128.101.3 and the DC2 of...

    Encrypt115 pointsBadges:
  • DHCP Server provides Wrong Subnet

    Our company had a hub and spoke network for years, a single server room supporting 20 remote locations, most using the Citrix farm.  We grew and started a second server room.  At the second location we have a switch stack of 9 Cisco 3750 10/100 switchws setup with 5 VLANS.  previously IP...

    D50041115 pointsBadges:
  • Connecting my Wi-Fi with my PC

    I want to setup a Wi-Fi Network. And I want each PC to be connected to my Wi-Fi and they would be shown in my server DHCP. What I have with me: Lease line Main Router (wifi router TP link wr941nd) Switch (D-link DES-1024 4D) Small Business Server 2008 (Microsoft) Four Wi-Fi routers (tp link...

    lalitkumar198925 pointsBadges:
  • Rogue DHCP router is changing my network settings!

    Please a bit of help i have a Rogue router on the LAN that's effective stops my network, My network connection is a DHCP MAC address. I have determined that a router on the LAN is changing my LAN card settings. The network administrator in not able to find how it. From my gateway: 176.126.176.11...

    Nicolaus5 pointsBadges:
  • How to configure data VLANS through PMP450 radio

    Hello, we have bought a PMP450 radio to upgrade from 8meg of 4E1s to 100meg capacity. Its installed on a remote site through a CMM to a metro Ethernet switch then to the core network. How would I configure data VLANS through this radio to a customer for internet service and how would I manage it...

    samabo5 pointsBadges:
  • different ip on the same network

    I was working at a place, where phones where connected to the network jacks, and from phones network cable was gone to a computer.the phone always get IP address different in range/class than the computer. if i connected the computer directly to the network jack, still it get the same style of IP...

    Bukhari19865 pointsBadges:
  • Sonicwall Zones and DHCP

    I have a network with a Windows Server acting as my DHCP server. I have a Sonicwall TZ215 with 3 zones. The first two are for intranet and internet connectivity, and are password protected. Zone 3 is meant to be used as a wireless router for internet only for our guests.I have other 'local'...

    Pesach5 pointsBadges:
  • LocalNetwork DHCP

    Hello!i have a course work about Local Network!my question is if the DHCP server failed to give IPs to the computers!what the IPs will be given the computers in this situation and what called this operation?

    NiceHero50 pointsBadges:
  • Access internal web server with domain name

    I was wondering what is the best method for allowing internal computers to access our locally-hosted web server with www.somedomain.com? I believe the internal clients are unable to do so because of how firewalls/NAT works (?). Is there a way I can add an entry in my DNS server? I am using Windows...

    Skepticals0 pointsBadges:
  • DHCP client failed to access the Internet.

    I have setup a DHCP server in my company network. Once of my client PC has successful get the IP address. When i type ipconfig /all. This client PC have IP address, gateway. The problem is failed to access the website WHEN TYPNG the URL. At client PC, i can ping the ip address of the website but i...

    david2009575 pointsBadges:
  • Ghosting from a server

    I am as student working on my internship.  I have been assigned a task of installing a stand-alone network for a computer repair lab.  The nw should be able to shoot out ghosted hard drives and updates.  The problem is that there are not the same computers hooked up at the station.  I am going...

    martu32815 pointsBadges:
  • Adding remote branches to our network

    We use Active Directory, DHCP, network printers, software and file servers. We want to add two more branches to our network, so users get IP addresses by DHCP and assigned to AD server. How can we create them like remote branches without giving same subnet to remote users? We want VPN connection on...

    TeachMeIT975 pointsBadges:
  • DHCP not distributing gateway

    I can't print to a specific printer when DHCP is enabled. However, if I static IP, it will print.

    Midtear55 pointsBadges:
  • HP Procurve vs Cisco switches comparison

    can you please provide me a comparison between HP Procurve switches and Cisco Switches in these points : ports,VLANs,link aggregation ,spanning tree,PoE,VoIP,DHCP,routing using OSPF

    Abrcore5 pointsBadges:
  • Free IT Book: Two-for-one this week!

    We got into the holiday spirit for this week's free IT book giveaway. Answer one of the unanswered questions below and win two IT books from our coveted technology library. Another plus? You get to pick which two books you receive. So get to answering, because you have a week to throw your name...

    MelanieYarbrough6,345 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following