• IP Conflict

    Hello all; I am having a problem with a small network that I need help with, this has happened a few times now where two laptops receive the same IP address from my DHCP server, and it is always the same 2 laptops, I was able to fix this momentarily by excluding the IP address that was in question...

    CGarcia26C1,025 pointsBadges:
  • Problem:The client could not connect to the remote computer

    When connecting to the application server several times it gives an error as in the subject and then after a few trials it goes through. Intermittent failures on connection. when trying to join domain i failed with errors indicating that DNS was not resolving the domain name. Or Domain name server...

    Eduado0 pointsBadges:
  • Slow network performance with LAN Servers

    This is my problem: Users are complaining that there internet and file downloads from LAN servers are very slow. We have discovered that if we remove the users current ip address from the DHCP pool and force those to get a completely different address the network performance returns to normal. Any...

    Brooksie1860 pointsBadges:
  • Backup Controller (Win2k3, AD) not operating as needed

    Hi there, I run a dedicated Win2k3 Active Directory server, which is running just fine. I run a backup Win2k3 AD server as well. When I turn off my primary, the backup should sub in, and direct individuals to my Exchange server, etc. But it's not. I know it's handling DNS queries fine, even when...

    Linger19740 pointsBadges:
  • DHCP issue

    Hi, Our Setup consists of a Windows2003 Server acting as a DC. We have a DHCP server running on it. Quite often, we have seen that the IP addressess leased by the server are not updated on the server. Due to this, we have issues with our home grown tool (which sends notes to pc based on the IP...

    Jagdish60 pointsBadges:
  • routers

    sir we are connecting our server through leasedline . one branch office connection is fast,but another area is slow, but two offices having same broadband connection of leased line.but one is dhcp enaled another is not installed dhcp pls give me the tips

    Pckarthikeyan0 pointsBadges:
  • simple remote administration

    hey y'all... is there a way to do the following remotely? change passwords create a share on a server hard drive I have the adminpak installed on my workstation which allows me to do it. I want to be able to do it from ANY computer on the network. I have Win2k3 servers only, and WinXP clients only....

    TheVyrys0 pointsBadges:
  • networks tepology

    i have IP range in my network in DHCP from 100.100.8.1 to100.100. 9.255 scope and i hace a part is static IP start from 100.100.10.1 to 100.100.11.255 please i want to know if i want to add a new range like 100.100.12.1...........etc what i will do ?????? thanx a lot

    Marwan mostafa5 pointsBadges:
  • Semi-Mobile Users

    I am having an issue with setting up a proxy on our semi-mobile users. When they are working on their laptop in the office they are required to go through our proxy server to access the internet. When they go home the proxy must be disabled to access the internet from there. Is there any way of...

    Dollface0 pointsBadges:
  • Server – Directory Service

    We have 2 servers on our network. The one is a Windows 2003 Server, which is the primary domain controller. The other is a Windows 2000 Server, which is the ?other,? or secondary, domain controller. The Windows 2003 server pretty much handles everything for the most part, like DNS, DHCP, etc. The...

    Davemd10 pointsBadges:
  • Can’t get DHCP to give addresses

    For the life of me can't seem to setup my server. I have 2 Nics for extra security and what is recommended for Remote Access. This worked with SBS but I just installed windows 2003 server and want to setup remote access server and exchange 2007 I have the external card: 192.168.1.5 IP 255.255.255.0...

    Calitech0 pointsBadges:
  • Domain Computers Disappear from View

    I have a network of about 25 computers using a Windows Server 2003 as a domain controller. I have a VPN for users to work from home. When a remote user logs in through the VPN, the only computer visible in the domain is that remote computer. I can reach any network computer by doing the...

    Jabate0 pointsBadges:
  • DNS Packet Drops

    The server running on windows 2003 (not primry domain) is used as DHCP server to issue client IP. I configured a 2wire router on this. but the conectivity to server keeps droping now and then. Could anyone here please let me know the possible cause? Best regards,

    Inamhaque15 pointsBadges:
  • Exchange Migration Issue

    I am trying to Migrate Exchange 5.5 to Exchange 2003. I've Forestprep and Domainprep, after looking at the logs I get the following error: DC = "CHAOS" In site = "Default-First-Site-Name Right Found: "SeSecurityPrivilege DC = "TURMOIL" In site = "Default-First-Site-Name !!! Right NOT found !!! DC =...

    Sdr071515 pointsBadges:
  • Site to Site VPN

    I have a site to site IPSec tunnel built and need to be able to browse all networks. I can ping resources on the remote end but cannot map to those resources. Both ends of the tunnel belong to different workgroups and the IP addresses are as follows. Local=10.101.203.x Remote=10.101.202.x with a...

    Mmwick0 pointsBadges:
  • how to change the local admin password in a domain within ou for 180 pc

    New Answer

    Maggot5 pointsBadges:
  • Properly Revamping my DNS Service

    New Discussion Post

    Debmini275 pointsBadges:
  • Windows Server 2000 domain

    Briefly, how would you go about adding a new Windows XP Pro PC & User onto a Windows Server 2000 domain?

    1111100 pointsBadges:
  • IP address conflict

    Two businesses are running Small Business Server 2000, each are set to the default 192.168.0.x subnet. Business 1 need a `teleworker? VPN connection to business 2 but there is an IP address conflict. How would you resolve this?

    1111100 pointsBadges:
  • Routing Between Subnets and between networks

    1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected....

    Chinmoymohanty0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following